Printer is now online. >>> M122 SENDING:M122 === Diagnostics === Used output buffers: 1 of 32 (32 max) === Platform === RepRapFirmware for Duet 2 WiFi/Ethernet version 1.21 running on Duet WiFi 1.02 or later + DueX2 Board ID: 08DGM-956GU-DJMSN-6J9F2-3S06M-TBQMH Static ram used: 16152 Dynamic ram used: 101088 Recycled dynamic ram: 1544 Stack ram used: 3576 current, 4564 maximum Never used ram: 7724 Last reset 00:06:58 ago, cause: power up Last software reset time unknown, reason: User, spinning module GCodes, available RAM 5824 bytes (slot 0) Software reset code 0x0003 HFSR 0x00000000, CFSR 0x00000000, ICSR 0x0441f000, BFAR 0xe000ed38, SP 0xffffffff Error status: 12 [ERROR] Error status: 12 Free file entries: 10 SD card 0 detected, interface speed: 20.0MBytes/sec SD card longest block write time: 150.1ms MCU temperature: min 38.5, current 41.4, max 42.1 Supply voltage: min 24.5, current 24.6, max 24.9, under voltage events: 0, over voltage events: 0 Driver 0: standstill, SG min/max 0/981 Driver 1: standstill, SG min/max 78/546 Driver 2: standstill, SG min/max 211/585 Driver 3: standstill, SG min/max not available Driver 4: standstill, SG min/max not available Driver 5: standstill, SG min/max not available Driver 6: standstill, SG min/max not available Expansion motor(s) stall indication: no Date/time: 2018-08-28 14:18:40 Slowest main loop (seconds): 0.332378; fastest: 0.000052 === Move === MaxReps: 2, StepErrors: 0, LaErrors: 0, FreeDm: 240, MinFreeDm 236, MaxWait: 2287413075ms, Underruns: 0, 0 Scheduled moves: 82, completed moves: 82 Bed compensation in use: mesh Bed probe heights: 0.000 0.000 0.000 0.000 0.000 === Heat === Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 === GCodes === Segments left: 0 Stack records: 1 allocated, 0 in use Movement lock held by null http is idle in state(s) 0 telnet is idle in state(s) 0 file is idle in state(s) 0 serial is ready with "M122" in state(s) 0 aux is idle in state(s) 0 daemon is idle in state(s) 0 queue is idle in state(s) 0 autopause is idle in state(s) 0 Code queue is empty. === Network === Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0) HTTP sessions: 1 of 8 - WiFi - Network state is running WiFi module is connected to access point Failed messages: pending 0, notready 0, noresp 0 WiFi firmware version 1.21RC4(08b3) WiFi MAC address 5c:cf:7f:76:72:f2 WiFi Vcc 3.32, reset reason Power on WiFi flash size 4194304, free heap 17088 WiFi IP address 192.168.1.4 WiFi signal strength -65dBm, reconnections 0, sleep mode modem Socket states: 0 0 0 0 0 0 0 0 === Expansion === DueX I2C errors 0