LPC SKR V1.3 stepper.enablePins = {2.1, 2.8, 0.21, 2.12, 0.10}; stepper.stepPins = {2.2, 0.19, 0.22, 2.13, 0.1}; stepper.directionPins = {2.6, 0.20, 2.11, 0.11, 0.0}; stepper.hasDriverCurrentControl = false; //1.29 X- //1.28 X+ //1.27 Y- //1.26 Y+ //1.25 Z- //1.24 Z+ endstop.pins = {1.29, 1.26, 1.25}; //X, Y, Z Endstops zProbe.pin = 1.24; // Bed E0 E1 heat.tempSensePins = {0.23, 0.24, 0.25}; //tb, th0, th1 heat.heatOnPins = {2.5, 2.7, 2.4}; //hbed, he0, he1 fan.pins = {2.3}; //cooling fan lpc.slowPWM.pins = {2.5}; lpc.slowPWM.frequencyHz = 10; //10Hz (for Bed PWM) lpc.fastPWM.pins = {2.7, 2.4}; lpc.fastPWM.frequencyHz = 250; //250Hz (for Hotend/Fan PWM) lpc.servoPins = {2.0}; specialPinMap = {2.0}; externalSDCard.csPin = 0.16; externalSDCard.cardDetectPin = 1.31; lpc.externalSDCard.spiFrequencyHz = 4000000; lpc.externalSDCard.spiChannel = 0; //LCD Pins (only ST9720 SPI currently supported) //setup the Software SPI Pins for LCD lpc.softwareSPI.pins = {1.20, NoPin, 1.18}; //Set to GPIO pins to use as SCK, MISO, MOSI lcd.spiChannel = 2; //2 = SWSPI - Use Software SPI Channel lcd.lcdCSPin = 1.19; //LCD Chip Select lcd.lcdBeepPin = 1.30; lcd.encoderPinA = 3.26; lcd.encoderPinB = 3.25; lcd.encoderPinSw = 0.28; //click lcd.lcdDCPin = NoPin; //DataControl Pin (A0) if none used set to NoPin lcd.panelButtonPin = NoPin;