11/26/2019, 10:27:03 AM: Connected to 192.168.1.210
11/26/2019, 10:43:02 AM: M115: FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.04 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2019-11-01b1
11/26/2019, 10:43:16 AM: M122: === Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.04 running on Duet WiFi 1.02 or later
Board ID: 08DGM-9T6BU-FG3SS-6J1D6-3S86L-KATZF
Used output buffers: 3 of 24 (16 max)
=== RTOS ===
Static ram: 25680
Dynamic ram: 92852 of which 312 recycled
Exception stack ram used: 320
Never used ram: 11908
Tasks: NETWORK(ready,628) HEAT(blocked,1232) MAIN(running,3744) IDLE(ready,200)
Owned mutexes:
=== Platform ===
Last reset 00:26:15 ago, cause: software
Last software reset at 2019-11-26 10:17, reason: Unknown, spinning module Platform, available RAM 11568 bytes (slot 2)
Software reset code 0x40b0 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f80f BFAR 0xe000ed38 SP 0x20001eb4 Task 0x5754454e
Stack: 0040665f 00448346 81000000 00000000 40cb3a00 00000000 00000000 3331bb4c 41c00000 3e178897 3e1cd04f 3e09d7e6 4200f9dd 00000000 47636300 37d33333 4354c416 00000000 4095c800 80000010 0040665f 2001750c 00000001
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 31.8, current 32.0, max 32.5
Supply voltage: min 13.7, current 13.8, max 13.8, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: standstill, SG min/max not available
Driver 1: standstill, SG min/max not available
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Date/time: 2019-11-26 10:43:16
Cache data hit count 4294967295
Slowest loop: 9.88ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 160, MinFreeDm: 160, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
=== GCodes ===
Segments left: 0
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 201.45ms; fastest: 0.08ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 2
WiFi firmware version 1.23
WiFi MAC address ec:fa:bc:31:73:76
WiFi Vcc 3.33, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 23824
WiFi IP address 192.168.1.210
WiFi signal strength -66dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
=== Filament sensors ===
Extruder 1 sensor: ok
11/26/2019, 10:46:52 AM: Failed to upload Duet_Wifi_Board_holder.gcode: Network error
11/26/2019, 10:47:38 AM: M122: === Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.04 running on Duet WiFi 1.02 or later
Board ID: 08DGM-9T6BU-FG3SS-6J1D6-3S86L-KATZF
Used output buffers: 1 of 24 (16 max)
=== RTOS ===
Static ram: 25680
Dynamic ram: 92852 of which 312 recycled
Exception stack ram used: 320
Never used ram: 11908
Tasks: NETWORK(ready,628) HEAT(blocked,1232) MAIN(running,3744) IDLE(ready,200)
Owned mutexes:
=== Platform ===
Last reset 00:30:37 ago, cause: software
Last software reset at 2019-11-26 10:17, reason: Unknown, spinning module Platform, available RAM 11568 bytes (slot 2)
Software reset code 0x40b0 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f80f BFAR 0xe000ed38 SP 0x20001eb4 Task 0x5754454e
Stack: 0040665f 00448346 81000000 00000000 40cb3a00 00000000 00000000 3331bb4c 41c00000 3e178897 3e1cd04f 3e09d7e6 4200f9dd 00000000 47636300 37d33333 4354c416 00000000 4095c800 80000010 0040665f 2001750c 00000001
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 11.2ms, max retries 0
MCU temperature: min 31.8, current 32.3, max 32.4
Supply voltage: min 13.7, current 13.8, max 13.8, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: standstill, SG min/max not available
Driver 1: standstill, SG min/max not available
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Date/time: 2019-11-26 10:47:37
Cache data hit count 4294967295
Slowest loop: 22.50ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 160, MinFreeDm: 160, MaxWait: 0ms
Bed compensation in use: none, comp offset 0.000
=== DDARing ===
Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
=== GCodes ===
Segments left: 0
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 201.15ms; fastest: 0.08ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 3
WiFi firmware version 1.23
WiFi MAC address ec:fa:bc:31:73:76
WiFi Vcc 3.33, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 22360
WiFi IP address 192.168.1.210
WiFi signal strength -66dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
=== Filament sensors ===
Extruder 1 sensor: ok