M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05 running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DGM-917DA-G4MSJ-6JTF2-3SD6K-KTNBA
Used output buffers: 4 of 24 (21 max)
=== RTOS ===
Static ram: 25712
Dynamic ram: 93676 of which 388 recycled
Exception stack ram used: 464
Never used ram: 10832
Tasks: NETWORK(ready,628) HEAT(blocked,1176) DUEX(suspended,160) MAIN(running,1564) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 00:30:31 ago, cause: power up
Last software reset at 2020-03-16 20:35, reason: User, spinning module GCodes, available RAM 10800 bytes (slot 0)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 38.9, current 41.4, max 41.7
Supply voltage: min 23.8, current 24.0, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: ok, SG min/max 0/1023
Driver 1: ok, SG min/max 0/1023
Driver 2: standstill, SG min/max not available
Driver 3: ok, SG min/max 0/1023
Driver 4: standstill, SG min/max not available
Driver 5: standstill, SG min/max 0/268
Driver 6: standstill, SG min/max 0/280
Driver 7: standstill, SG min/max 0/616
Driver 8: standstill, SG min/max not available
Driver 9: standstill, SG min/max not available
Date/time: 2020-03-19 22:00:45
Cache data hit count 4294967295
Slowest loop: 3.42ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 156, MinFreeDm: 96, MaxWait: 0ms
Bed compensation in use: mesh, comp offset 0.000
=== DDARing ===
Scheduled moves: 32042, completed moves: 32002, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 0 is on, I-accum = 0.1
Heater 1 is on, I-accum = 0.4
=== GCodes ===
Segments left: 1
Stack records: 2 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is doing "G1 X126.601 Y129.294 E2584.3878" in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 243.44ms; fastest: 0.08ms
Responder states: HTTP(2) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 1
WiFi firmware version 1.23
WiFi MAC address ec:fa:bc:01:d8:96
WiFi Vcc 3.38, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 23728
WiFi IP address 192.168.1.27
WiFi signal strength -61dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
3/19/2020, 9:50:02 PM	M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05 running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DGM-917DA-G4MSJ-6JTF2-3SD6K-KTNBA
Used output buffers: 6 of 24 (12 max)
=== RTOS ===
Static ram: 25712
Dynamic ram: 93676 of which 388 recycled
Exception stack ram used: 464
Never used ram: 10832
Tasks: NETWORK(ready,628) HEAT(blocked,1176) DUEX(suspended,160) MAIN(running,1564) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 00:19:48 ago, cause: power up
Last software reset at 2020-03-16 20:35, reason: User, spinning module GCodes, available RAM 10800 bytes (slot 0)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 15.1ms, max retries 0
MCU temperature: min 33.9, current 39.0, max 39.3
Supply voltage: min 23.9, current 24.2, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: ok, SG min/max 0/1023
Driver 1: ok, SG min/max 0/1023
Driver 2: standstill, SG min/max not available
Driver 3: ok, SG min/max 0/1023
Driver 4: standstill, SG min/max not available
Driver 5: ok, SG min/max 0/282
Driver 6: ok, SG min/max 0/511
Driver 7: ok, SG min/max 0/443
Driver 8: standstill, SG min/max not available
Driver 9: standstill, SG min/max not available
Date/time: 2020-03-19 21:50:02
Cache data hit count 3347025675
Slowest loop: 207.63ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 137, MinFreeDm: 87, MaxWait: 273694ms
Bed compensation in use: mesh, comp offset 0.000
=== DDARing ===
Scheduled moves: 11254, completed moves: 11216, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 0 is on, I-accum = 0.1
Heater 1 is on, I-accum = 0.5
=== GCodes ===
Segments left: 2
Stack records: 2 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 2
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 28.55ms; fastest: 0.00ms
Responder states: HTTP(4) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address ec:fa:bc:01:d8:96
WiFi Vcc 3.38, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25192
WiFi IP address 192.168.1.27
WiFi signal strength -61dBm, reconnections 0, sleep mode modem
Socket states: 0 2 0 0 0 0 0 0