pi@starttex:~ $ sudo /opt/dsf/bin/DuetControlServer -l debug
Duet Control Server v1.3.2
Written by Christian Hammacher for Duet3D
Licensed under the terms of the GNU Public License Version 3

[info] Settings loaded
[info] Environment initialized
[info] Connection to Duet established
[info] IPC socket created at /var/run/dsf/dcs.sock
[debug] IPC#2: Got new UNIX connection, checking mode...
[debug] IPC#2: Subscription processor registered in Patch mode
[debug] IPC#3: Got new UNIX connection, checking mode...
[debug] IPC#3: Command processor added
[debug] IPC#3: Received command AddUserSession
[debug] Requesting update of key boards, seq 0 -> 0
[debug] Requesting update of key directories, seq 0 -> 0
[debug] Requesting update of key fans, seq 0 -> 4
[debug] Requesting update of key heat, seq 0 -> 11
[debug] Requesting update of key inputs, seq 0 -> 1
[debug] Requesting update of key job, seq 0 -> 275
[debug] Requesting update of key move, seq 0 -> 14
[debug] Requesting update of key network, seq 0 -> 3
[debug] Requesting update of key sensors, seq 0 -> 2
[debug] Requesting update of key spindles, seq 0 -> 0
[debug] Requesting update of key state, seq 0 -> 13
[debug] Requesting update of key tools, seq 0 -> 5
[debug] Requesting update of key volumes, seq 0 -> 0
[debug] Updated key boards
[debug] Updated key directories
[debug] Updated key fans
[debug] Updated key heat
[debug] Updated key inputs
[debug] IPC#4: Got new UNIX connection, checking mode...
[debug] IPC#4: Command processor added
[debug] IPC#5: Got new UNIX connection, checking mode...
[debug] IPC#4: Received command ResolvePath
[debug] IPC#5: Command processor added
[debug] IPC#6: Got new UNIX connection, checking mode...
[debug] IPC#6: Command processor added
[debug] IPC#5: Received command ResolvePath
[debug] IPC#6: Received command ResolvePath
[debug] IPC#7: Got new UNIX connection, checking mode...
[debug] IPC#4: Connection closed
[debug] IPC#5: Connection closed
[debug] Updated key job
[debug] IPC#8: Got new UNIX connection, checking mode...
[debug] IPC#7: Command processor added
[debug] IPC#6: Connection closed
[debug] IPC#8: Command processor added
[debug] IPC#8: Received command ResolvePath
[debug] IPC#7: Received command ResolvePath
[debug] IPC#8: Connection closed
[debug] IPC#7: Connection closed
[debug] Filament Filamentum PLA Extrafill has been assigned to extruder drive 0
[debug] IPC#9: Got new UNIX connection, checking mode...
[debug] IPC#9: Command processor added
[debug] IPC#9: Received command ResolvePath
[debug] Updated key move
[debug] IPC#9: Connection closed
[debug] IPC#10: Got new UNIX connection, checking mode...
[debug] IPC#11: Got new UNIX connection, checking mode...
[debug] IPC#11: Command processor added
[debug] IPC#10: Command processor added
[debug] IPC#12: Got new UNIX connection, checking mode...
[debug] IPC#12: Command processor added
[debug] IPC#11: Received command ResolvePath
[debug] IPC#10: Received command ResolvePath
[debug] IPC#12: Received command ResolvePath
[debug] IPC#10: Connection closed
[debug] IPC#11: Connection closed
[debug] IPC#12: Connection closed
[debug] Updated key sensors
[debug] Updated key state
[debug] Updated key tools
[debug] Updated key volumes
[debug] IPC#13: Got new UNIX connection, checking mode...
[debug] IPC#13: Subscription processor registered in Patch mode
[debug] IPC#14: Got new UNIX connection, checking mode...
[debug] IPC#14: Command processor added
[debug] IPC#14: Received command ResolvePath