[debug] File: Sent G91 ; relative moves, remaining space 1512, needed 24
[debug] File: Sent G1 H1 Z200 F500 ; try to move Z towards home by 150mm & check for endstop, remaining space 1464, needed 48
[debug] File: Sent G1 H2 Z-5 F200 ; move Z 5mm away from endstop, remaining space 1416, needed 48
[debug] File: Sent G1 H1 Z10 S1 ; try to move Z towards home by 10mm & check for endstop, remaining space 1368, needed 48
[debug] File: Sent G90 ; absolute moves, remaining space 1344, needed 24
[debug] Completed G91 ; relative moves
[debug] Completed G1 H1 Z200 F500 ; try to move Z towards home by 150mm & check for endstop
[debug] Completed G1 H2 Z-5 F200 ; move Z 5mm away from endstop
[debug] Completed G1 H1 Z10 S1 ; try to move Z towards home by 10mm & check for endstop
[debug] Completed G90 ; absolute moves
[debug] Finished codes from macro file homez.g
[info] File: Finished macro file homez.g
[debug] Completed G28 Z ; home Z
[debug] File: ==> Finished starting code: G28 Z ; home Z
[debug] File: Sent M144 S0 ; set bed to standby, remaining space 1504, needed 32
[debug] File: -> Resumed suspended code
[debug] File: Sent M106 S0 ; turn off fans, remaining space 1472, needed 32
[debug] File: -> Resumed suspended code
[debug] File: Sent G10 R0 ; set tool standby temperature to 0, remaining space 1440, needed 32
[debug] File: -> Resumed suspended code
[debug] File: Sent T-1 ; deselect tool, remaining space 1416, needed 24
[debug] File: -> Resumed suspended code
[debug] File: Sent M18 ; turn off motors, remaining space 1392, needed 24
[debug] File: -> Resumed suspended code
[debug] Completed M144 S0 ; set bed to standby
[debug] Completed G10 R0 ; set tool standby temperature to 0
[debug] Completed M106 S0 ; turn off fans
[debug] File: Suspending code M18 ; turn off motors
[info] Starting macro file tfree0.g on channel File
[debug] Waiting for execution of ; tfree0.g (macro code)
[debug] Waiting for execution of ; called when tool 0 is freed (macro code)
[debug] Processing ; tfree0.g
[debug] Completed ; tfree0.g
[debug] Processing ; called when tool 0 is freed
[debug] Completed ; called when tool 0 is freed
[debug] Finished codes from macro file tfree0.g
[info] File: Finished macro file tfree0.g
[debug] File: ==> Finished starting code: T-1 ; deselect tool
[debug] File: Sent M18 ; turn off motors, remaining space 1512, needed 24
[debug] File: -> Resumed suspended code
[debug] Completed T-1 ; deselect tool
[debug] Completed M18 ; turn off motors
[debug] Finished codes from macro file stop.g
[info] File: Finished macro file stop.g
[debug] File: ==> Finished starting code: M98 P"0:/sys/stop.g"
[debug] Completed M98 P"0:/sys/stop.g"
[debug] Finished codes from macro file cancel.g
[info] File: Finished macro file cancel.g
[debug] Completed M0 =>
[info] Cancelled job file
[debug] File: ==> Finished starting code: M0 =>
[debug] Requesting update of key job, seq 822 -> 823
[debug] Updated key job
[debug] IPC#62: Got new UNIX connection, checking mode...
[debug] IPC#62: Command processor added
[debug] IPC#62: Received command ResolvePath
[debug] IPC#62: Connection closed
[debug] IPC#63: Got new UNIX connection, checking mode...
[debug] IPC#63: Command processor added
[debug] IPC#63: Received command ResolvePath
[debug] IPC#64: Got new UNIX connection, checking mode...
[debug] IPC#64: Command processor added
[debug] IPC#64: Received command GetFileInfo
[debug] IPC#63: Connection closed
[debug] IPC#64: Connection closed
[debug] IPC#65: Got new UNIX connection, checking mode...
[debug] IPC#65: Command processor added
[debug] IPC#65: Received command ResolvePath
[debug] IPC#65: Connection closed
[debug] IPC#66: Got new UNIX connection, checking mode...
[debug] IPC#66: Command processor added
[debug] IPC#66: Received command SimpleCode
[debug] Waiting for execution of M701
[debug] Processing M701
[debug] HTTP: Sent M701, remaining space 1512, needed 24
[debug] Completed M701 => Error: M701: No tool selected
[debug] IPC#66: Connection closed
[debug] IPC#67: Got new UNIX connection, checking mode...
[debug] IPC#67: Command processor added
[debug] IPC#67: Received command SimpleCode
[debug] Waiting for execution of T0
[debug] Processing T0
[debug] HTTP: Sent T0, remaining space 1512, needed 24
[debug] Completed T0 =>
[debug] IPC#67: Connection closed
[debug] IPC#68: Got new UNIX connection, checking mode...
[debug] IPC#68: Command processor added
[debug] IPC#68: Received command SimpleCode
[debug] Waiting for execution of M701
[debug] Processing M701
[debug] HTTP: Sent M701, remaining space 1512, needed 24
[debug] Completed M701 => Loaded filament in the selected tool: Filamentum PLA Extrafill
[debug] IPC#68: Connection closed
[debug] IPC#69: Got new UNIX connection, checking mode...
[debug] IPC#69: Command processor added
[debug] IPC#69: Received command SimpleCode
[debug] Waiting for execution of T-1
[debug] Processing T-1
[debug] HTTP: Sent T-1, remaining space 1512, needed 24
[debug] Completed T-1 =>
[debug] IPC#69: Connection closed
[debug] IPC#70: Got new UNIX connection, checking mode...
[debug] IPC#70: Command processor added
[debug] IPC#70: Received command SimpleCode
[debug] Waiting for execution of T0
[debug] Waiting for execution of M702
[debug] Processing T0
[debug] Processing M702
[debug] HTTP: Sent T0, remaining space 1512, needed 24
[debug] HTTP: Sent M702, remaining space 1488, needed 24
[info] Starting macro file unload.g on channel HTTP
[debug] Completed T0 =>
[debug] Waiting for execution of M98 P"/macros/Filaments/PLA/Unload" (macro code)
[debug] Processing M98 P"/macros/Filaments/PLA/Unload"
[debug] HTTP: Sent M98 P"/macros/Filaments/PLA/Unload", remaining space 1476, needed 60
[info] Starting macro file Unload on channel HTTP
[debug] Waiting for execution of ; Display message (macro code)
[debug] Processing ; Display message
[debug] Waiting for execution of M291 P"Please wait while the nozzle is being heated up..." R"Unloading PLA" S1 ;T5 (macro code)
[debug] Completed ; Display message
[debug] Waiting for execution of G10 S100 ; heat up the current tool to 100C (macro code)
[debug] Processing M291 P"Please wait while the nozzle is being heated up..." R"Unloading PLA" S1 ;T5
[debug] Waiting for execution of M116 ; wait for the temperatures to be reached (macro code)
[debug] Processing G10 S100 ; heat up the current tool to 100C
[debug] Waiting for execution of M400 (macro code)
[debug] Processing M116 ; wait for the temperatures to be reached
[debug] Waiting for execution of M292 P0 ; cancel message (macro code)
[debug] Processing M400
[debug] Waiting for execution of ; Display another message (macro code)
[debug] Processing M292 P0 ; cancel message
[debug] Waiting for execution of M291 P"Retracting filament..." R"Unloading PLA" S1 ;T5 (macro code)
[debug] Processing ; Display another message
[debug] Waiting for execution of M83 ; relative e steps (macro code)
[debug] Processing M291 P"Retracting filament..." R"Unloading PLA" S1 ;T5
[debug] Completed ; Display another message
[debug] Waiting for execution of G92 E0 ; reset e steps (macro code)
[debug] Processing M83 ; relative e steps
[debug] Waiting for execution of G1 E-20 F1800 ; retract 20mm of filament at 30 mm/s (previously 5 mm/s) (macro code)
[debug] Processing G92 E0 ; reset e steps
[debug] Waiting for execution of G1 E-520 F3600 ; retract 520mm of filament at 60 mm/s (macro code)
[debug] Processing G1 E-20 F1800 ; retract 20mm of filament at 30 mm/s (previously 5 mm/s)
[debug] Waiting for execution of M400 ; wait for moves to complete (macro code)
[debug] Waiting for execution of G10 S0 ; turn the heater off again (macro code)
[debug] Processing G1 E-520 F3600 ; retract 520mm of filament at 60 mm/s
[debug] Waiting for execution of G92 E0 ; reset the extruder count (macro code)
[debug] Processing M400 ; wait for moves to complete
[debug] Waiting for execution of M84 E0 ; turn extruder motor off (macro code)
[debug] Processing G10 S0 ; turn the heater off again
[debug] Waiting for execution of M292 P0 ; cancel message (macro code)
[debug] Processing G92 E0 ; reset the extruder count
[debug] Processing M84 E0 ; turn extruder motor off
[debug] Processing M292 P0 ; cancel message
[debug] HTTP: Sent M291 P"Please wait while the nozzle is being heated up..." R"Unloading PLA" S1 ;T5, remaining space 1420, needed 116
[debug] HTTP: Sent G10 S100 ; heat up the current tool to 100C, remaining space 1388, needed 32
[debug] HTTP: Sent M116 ; wait for the temperatures to be reached, remaining space 1364, needed 24
[debug] HTTP: Sent M400, remaining space 1340, needed 24
[debug] HTTP: Sent M292 P0 ; cancel message, remaining space 1308, needed 32
[debug] HTTP: Sent M291 P"Retracting filament..." R"Unloading PLA" S1 ;T5, remaining space 1220, needed 88
[debug] HTTP: Sent M83 ; relative e steps, remaining space 1196, needed 24
[debug] HTTP: Sent G92 E0 ; reset e steps, remaining space 1164, needed 32
[debug] HTTP: Sent G1 E-20 F1800 ; retract 20mm of filament at 30 mm/s (previously 5 mm/s), remaining space 1124, needed 40
[debug] HTTP: Sent G1 E-520 F3600 ; retract 520mm of filament at 60 mm/s, remaining space 1084, needed 40
[debug] HTTP: Sent M400 ; wait for moves to complete, remaining space 1060, needed 24
[debug] HTTP: Sent G10 S0 ; turn the heater off again, remaining space 1028, needed 32
[debug] HTTP: Sent G92 E0 ; reset the extruder count, remaining space 996, needed 32
[debug] HTTP: Sent M84 E0 ; turn extruder motor off, remaining space 964, needed 32
[debug] HTTP: Sent M292 P0 ; cancel message, remaining space 932, needed 32
[debug] Requesting update of key move, seq 21 -> 22
[debug] Completed G10 S100 ; heat up the current tool to 100C
[debug] Completed M291 P"Please wait while the nozzle is being heated up..." R"Unloading PLA" S1 ;T5
[debug] Waiting for execution of ;T-1 (macro code)
[debug] Processing ;T-1
[debug] Completed ;T-1
[debug] Updated key move
[debug] Requesting update of key state, seq 29 -> 30
[debug] Updated key state
[debug] Requesting update of key state, seq 30 -> 31
[debug] Updated key state
[debug] Completed M116 ; wait for the temperatures to be reached
[debug] Completed M400
[debug] Completed M292 P0 ; cancel message
[debug] Completed M291 P"Retracting filament..." R"Unloading PLA" S1 ;T5
[debug] Completed M83 ; relative e steps
[debug] Completed G92 E0 ; reset e steps
[debug] Completed G1 E-20 F1800 ; retract 20mm of filament at 30 mm/s (previously 5 mm/s)
[debug] Completed G1 E-520 F3600 ; retract 520mm of filament at 60 mm/s
[debug] Requesting update of key state, seq 31 -> 33
[debug] Updated key state
[debug] Completed M400 ; wait for moves to complete
[debug] Completed G10 S0 ; turn the heater off again
[debug] Completed G92 E0 ; reset the extruder count
[debug] Completed M84 E0 ; turn extruder motor off
[debug] Completed M292 P0 ; cancel message
[debug] Finished codes from macro file Unload
[info] HTTP: Finished macro file Unload
[debug] HTTP: ==> Finished starting code: M98 P"/macros/Filaments/PLA/Unload"
[debug] Completed M98 P"/macros/Filaments/PLA/Unload"
[debug] Finished codes from macro file unload.g
[debug] Requesting update of key state, seq 33 -> 34
[info] HTTP: Finished macro file unload.g
[debug] HTTP: ==> Finished starting code: M702
[debug] Completed M702 =>
[debug] IPC#70: Connection closed
[debug] Updated key state