M122
=== Diagnostics ===
RepRapFirmware for Duet 3 MB6HC version 3.3beta1 running on Duet 3 MB6HC v0.6 or 1.0 (SBC mode)
Board ID: 08DGM-9T66A-G63SJ-6J1D6-3SD6R-9U0BA
Used output buffers: 4 of 40 (15 max)
=== RTOS ===
Static ram: 148196
Dynamic ram: 61272 of which 712 recycled
Never used RAM 140492, free system stack 176 words
Tasks: Linux(ready,133) HEAT(delaying,308) CanReceiv(notifyWait,799) CanSender(notifyWait,373) CanClock(delaying,351) TMC(notifyWait,52) MAIN(running,924) IDLE(ready,20)
Owned mutexes: HTTP(MAIN)
=== Platform ===
Last reset 00:03:45 ago, cause: power up
Last software reset at 2021-03-07 14:22, reason: User, GCodes spinning, available RAM 140492, slot 1
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task Linu Freestk 0 n/a
Error status: 0x00
Aux0 errors 0,0,0
Aux1 errors 0,0,0
MCU temperature: min 33.1, current 35.0, max 35.5
Supply voltage: min 24.0, current 24.0, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes
12V rail voltage: min 12.2, current 12.2, max 12.3, under voltage events: 0
Driver 0: position 0, standstill, reads 27098, writes 14 timeouts 0, SG min/max 0/0
Driver 1: position 0, standstill, reads 27099, writes 14 timeouts 0, SG min/max 0/0
Driver 2: position 0, standstill, reads 27102, writes 11 timeouts 0, SG min/max 0/0
Driver 3: position 0, standstill, reads 27099, writes 14 timeouts 0, SG min/max 0/0
Driver 4: position 0, standstill, reads 27100, writes 14 timeouts 0, SG min/max 0/0
Driver 5: position 0, standstill, reads 27100, writes 14 timeouts 0, SG min/max 0/0
Date/time: 2021-03-08 17:49:07
Slowest loop: 1.11ms; fastest: 0.05ms
=== Storage ===
Free file entries: 10
SD card 0 not detected, interface speed: 37.5MBytes/sec
SD card longest read time 0.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 125, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP* is doing "M122" in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger* is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== CAN ===
Messages queued 1540, send timeouts 0, received 1202, lost 0, longest wait 2ms for reply type 6049, peak Tx sync delay 192, free buffers 49 (min 48)
=== SBC interface ===
State: 4, failed transfers: 0
Last transfer: 3ms ago
RX/TX seq numbers: 3537/3537
SPI underruns 0, overruns 0
Number of disconnects: 0, IAP RAM available 0x2d3e0
Buffer RX/TX: 0/0-0
=== Duet Control Server ===
Duet Control Server v3.2.2
Code buffer space: 4096
Configured SPI speed: 8000000 Hz
Full transfers per second: 30.43
Maximum length of RX/TX data transfers: 3208/796