3/11/2021, 10:22:03 PM	m122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.3beta1 running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DGM-917NK-F2MS4-7J1F0-3S46R-KGS4D
Used output buffers: 3 of 24 (24 max)
=== RTOS ===
Static ram: 21448
Dynamic ram: 77604 of which 60 recycled
Never used RAM 12968, free system stack 96 words
Tasks: NETWORK(ready,229) HEAT(delaying,310) DUEX(notifyWait,23) MAIN(running,293) IDLE(ready,19)
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:15:12 ago, cause: power up
Last software reset at 2021-03-11 18:16, reason: User, GCodes spinning, available RAM 12968, slot 0
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x0c
Aux0 errors 0,0,0
MCU temperature: min 19.1, current 34.4, max 34.6
Supply voltage: min 24.1, current 24.2, max 24.5, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: position 40770, ok, SG min/max 0/1023
Driver 1: position 5275, ok, SG min/max 0/1023
Driver 2: position 9373, ok, SG min/max 0/1023
Driver 3: position 0, ok, SG min/max 0/1023
Driver 4: position 0, ok, SG min/max 0/1023
Driver 5: position 0, standstill, SG min/max not available
Driver 6: position 0, standstill, SG min/max not available
Driver 7: position 0, standstill, SG min/max not available
Driver 8: position 0, ok, SG min/max 0/1023
Driver 9: position 0, standstill, SG min/max not available
Driver 10: position 0
Driver 11: position 0
Date/time: 2021-03-11 22:22:02
Cache data hit count 936346140
Slowest loop: 135.66ms; fastest: 0.11ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 8
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 4.2ms, write time 149.5ms, max retries 0
=== Move ===
DMs created 83, maxWait 95560ms, bed compensation in use: mesh, comp offset 0.000
=== MainDDARing ===
Scheduled moves 10794, completed moves 10761, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 2], CDDA state 3
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
Heater 0 is on, I-accum = 0.0
Heater 3 is on, I-accum = 0.7
=== GCodes ===
Segments left: 1
Movement lock held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is doing "G1 F7200.000" in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is not empty:
Queued 'M106 S247.35' for move 10783
1 of 16 codes have been queued.
=== DueX ===
Read count 1, 0.07 reads/min
=== Network ===
Slowest loop: 157.77ms; fastest: 0.00ms
Responder states: HTTP(1) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8
- WiFi -
Network state is active
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.25
WiFi MAC address 60:01:94:2e:9f:97
WiFi Vcc 3.39, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 26616
WiFi IP address 192.168.1.202
WiFi signal strength -57dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00002002
Socket states: 0 2 0 0 0 0 0 0