24.3.2021 22.54.30: M122: === Diagnostics === RepRapFirmware for Duet 2 WiFi/Ethernet version 3.3beta2 running on Duet WiFi 1.02 or later Board ID: 08DGM-9T6BU-FG3S8-6J1FD-3S46R-KVJBD Used output buffers: 3 of 24 (23 max) === RTOS === Static ram: 21568 Dynamic ram: 75016 of which 0 recycled Never used RAM 17832, free system stack 96 words Tasks: NETWORK(ready,229) HEAT(delaying,310) MAIN(running,429) IDLE(ready,20) Owned mutexes: WiFi(NETWORK) === Platform === Last reset 00:06:26 ago, cause: power up Last software reset at 2021-03-24 21:06, reason: User, GCodes spinning, available RAM 17832, slot 0 Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a Error status: 0x00 Aux0 errors 0,0,0 MCU temperature: min 25.2, current 25.7, max 25.9 Supply voltage: min 24.2, current 24.3, max 24.5, under voltage events: 0, over voltage events: 0, power good: yes Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0 Driver 0: position 8000, standstill, SG min/max not available Driver 1: position 12000, standstill, SG min/max not available Driver 2: position 2000, ok, SG min/max 0/43 Driver 3: position 0, standstill, SG min/max not available Driver 4: position 0, standstill, SG min/max not available Driver 5: position 0 Driver 6: position 0 Driver 7: position 0 Driver 8: position 0 Driver 9: position 0 Driver 10: position 0 Driver 11: position 0 Date/time: 2021-03-24 22:54:29 Cache data hit count 386950982 Slowest loop: 20.90ms; fastest: 0.22ms I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0 === Storage === Free file entries: 9 SD card 0 detected, interface speed: 20.0MBytes/sec SD card longest read time 0.8ms, write time 9.9ms, max retries 0 === Move === DMs created 83, maxWait 1ms, bed compensation in use: none, comp offset 0.000 === MainDDARing === Scheduled moves 6, completed moves 5, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state 3 === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === Heat === Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1 === GCodes === Segments left: 0 Movement lock held by HTTP HTTP is idle in state(s) 48 9, running macro Telnet is idle in state(s) 0 File is idle in state(s) 0 USB is idle in state(s) 0 Aux is idle in state(s) 0 Trigger is idle in state(s) 0 Queue is idle in state(s) 0 LCD is idle in state(s) 0 Daemon is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty. === Network === Slowest loop: 202.09ms; fastest: 0.10ms Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions HTTP sessions: 1 of 8 - WiFi - Network state is active WiFi module is connected to access point Failed messages: pending 0, notready 0, noresp 1 WiFi firmware version 1.25 WiFi MAC address 80:7d:3a:14:fd:c3 WiFi Vcc 3.43, reset reason Turned on by main processor WiFi flash size 4194304, free heap 26184 WiFi IP address 192.168.1.20 WiFi signal strength -75dBm, mode 802.11n, reconnections 0, sleep mode modem Clock register 00002002 Socket states: 0 0 0 0 0 0 0 0