m122 === Diagnostics === RepRapFirmware for Duet 3 MB6HC version 3.2.2 running on Duet 3 MB6HC v1.01 or later (SBC mode) Board ID: 08DJM-956L2-G43S4-6J9DL-3S46P-1S42D Used output buffers: 1 of 40 (11 max) === RTOS === Static ram: 149788 Dynamic ram: 62216 of which 40 recycled Never used RAM 146788, free system stack 160 words Tasks: Linux(ready,95) HEAT(blocked,356) CanReceiv(blocked,927) CanSender(blocked,371) CanClock(blocked,352) TMC(blocked,19) MAIN(running,1118) IDLE(ready,19) Owned mutexes: HTTP(MAIN) === Platform === Last reset 15:29:01 ago, cause: power up Last software reset at 2021-03-25 18:02, reason: User, none spinning, available RAM 146788, slot 1 Software reset code 0x0012 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task Linu Freestk 0 n/a Error status: 0x00 Aux0 errors 0,0,0 Aux1 errors 0,0,0 MCU temperature: min 36.8, current 38.0, max 38.0 Supply voltage: min 23.8, current 23.9, max 24.0, under voltage events: 0, over voltage events: 0, power good: yes 12V rail voltage: min 12.0, current 12.0, max 12.1, under voltage events: 0 Driver 0: position 219904, standstill, reads 13780, writes 2 timeouts 0, SG min/max 0/333 Driver 1: position 50176, standstill, reads 13780, writes 2 timeouts 0, SG min/max 0/350 Driver 2: position 31616, standstill, reads 13780, writes 2 timeouts 0, SG min/max 0/335 Driver 3: position 0, standstill, reads 13779, writes 2 timeouts 0, SG min/max 0/1023 Driver 4: position 0, standstill, reads 13778, writes 3 timeouts 0, SG min/max 0/63 Driver 5: position 0, standstill, reads 13782, writes 0 timeouts 0, SG min/max not available Date/time: 2021-03-26 09:43:45 Slowest loop: 79.25ms; fastest: 0.04ms === Storage === Free file entries: 10 SD card 0 not detected, interface speed: 37.5MBytes/sec SD card longest read time 0.0ms, write time 0.0ms, max retries 0 === Move === DMs created 125, maxWait 496566ms, bed compensation in use: none, comp offset 0.000 === MainDDARing === Scheduled moves 1296, completed moves 1296, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === Heat === Bed heaters = -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1 === GCodes === Segments left: 0 Movement lock held by null HTTP* is doing "M122" in state(s) 0 Telnet is idle in state(s) 0 File* is idle in state(s) 0 USB is idle in state(s) 0 Aux is idle in state(s) 0 Trigger* is idle in state(s) 0 Queue* is idle in state(s) 0 LCD is idle in state(s) 0 SBC is idle in state(s) 0 Daemon is idle in state(s) 0 Aux2 is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty. === CAN === Messages queued 0, send timeouts 2740, received 0, lost 0, longest wait 0ms for reply type 0, free buffers 48 === SBC interface === State: 4, failed transfers: 0 Last transfer: 1ms ago RX/TX seq numbers: 52485/52485 SPI underruns 0, overruns 0 Number of disconnects: 0, IAP RAM available 0x2c8a8 Buffer RX/TX: 0/0-0 === Duet Control Server === Duet Control Server v3.2.2 Code buffer space: 4096 Configured SPI speed: 8000000 Hz Full transfers per second: 37.00 Maximum length of RX/TX data transfers: 2644/1588 File /opt/dsf/sd/gcodes/CranialArteries332021.gcode is selected, paused