M122
=== Diagnostics ===
Used output buffers: 1 of 32 (5 max)
=== Platform ===
Memory usage:
Program static ram used: 20276
Dynamic ram used: 73876
Recycled dynamic ram: 56
Current stack ram used: 3304
Maximum stack ram used: 11272
Never used ram: 25592
Last reset 00:09:15 ago, cause: software
Last software reset code 0x0003, HFSR 0x00000000, CFSR 0x00000000, ICSR 0x00400000, BFAR 0xe000ed38, SP 0xffffffff
Stack: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffff
Spinning module during software reset: GCodes, available RAM 29232 bytes (slot 3)
Error status: 0
Max PWM loop count 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 100.7ms
MCU temperature: min 40.1, current 43.2, max 47.0
Supply voltage: min 24.1, current 24.1, max 24.5, under voltage events: 0, over voltage events: 0
Driver 0: stalled standstill
Driver 1: stalled standstill
Driver 2: stalled standstill
Driver 3: standstill
Driver 4: standstill
Current date and time: 1970-01-01 00:00:00
Slowest main loop (seconds): 0.100739; fastest: 0.000000
=== Move ===
MaxReps: 7, StepErrors: 0, MaxWait: 4094ms, Underruns: 0, 0
Bed compensation in use: none
Bed probe heights: 0.444 0.259 -0.006 -0.187 -0.446 -0.159 -0.465 -0.083 0.144 0.357 0.222 0.091 -0.109 -0.254 -0.132 -0.009 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Probe change coordinates:
=== Heat ===
Bed heater = 0, chamber heater = -1
Heater 0 is on, I-accum = 0.0
Heater 1 is on, I-accum = 0.4
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 0 in use
Movement lock held by null
http is ready with "M122 "
telnet is idle
file is idle
serial is idle
aux is idle
daemon is idle
=== Network ===
WiFiServer is running
SPI underruns 0, overruns 0
=== Webserver ===
HTTP sessions: 1 of 8