M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.05 running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DLM-996RU-N85T0-6J1D4-3SJ6K-TAVZR
Used output buffers: 3 of 24 (14 max)
=== RTOS ===
Static ram: 25712
Dynamic ram: 94208 of which 0 recycled
Exception stack ram used: 496
Never used ram: 10656
Tasks: NETWORK(ready,628) HEAT(blocked,808) DUEX(suspended,160) MAIN(running,3728) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 49:08:13 ago, cause: power up
Last software reset at 2021-05-12 16:56, reason: User, spinning module GCodes, available RAM 10720 bytes (slot 2)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x04417000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 8
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 107.9ms, max retries 0
MCU temperature: min 26.7, current 37.7, max 39.8
Supply voltage: min 22.5, current 23.7, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: standstill, SG min/max 0/689
Driver 1: standstill, SG min/max not available
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max 0/1023
Driver 4: standstill, SG min/max not available
Driver 5: standstill, SG min/max 0/445
Driver 6: standstill, SG min/max 0/1023
Driver 7: standstill, SG min/max 0/1023
Driver 8: standstill, SG min/max 0/1023
Driver 9: standstill, SG min/max 0/1023
Date/time: 2021-05-22 06:17:34
Cache data hit count 4294967295
Slowest loop: 60.68ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 160, MinFreeDm: 82, MaxWait: 339336ms
Bed compensation in use: mesh, comp offset -0.270
=== DDARing ===
Scheduled moves: 1298601, completed moves: 1298601, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = 5 -1
Heater 0 is on, I-accum = 0.0
Heater 1 is on, I-accum = 0.2
Heater 5 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 109.27ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 2 of 8
- WiFi -
Network state is running
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.23
WiFi MAC address ec:fa:bc:5b:41:b9
WiFi Vcc 3.38, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25216
WiFi IP address 192.168.5.142
WiFi signal strength -72dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
=== Filament sensors ===
Extruder 0 sensor: ok
Extruder 1 sensor: ok