2021-05-30 11:06:26 [warn] Started printing file 0:/gcodes/ScrewMount_x400speed.gcode
2021-05-30 11:06:26 [debug] File 0:/gcodes/ScrewMount_x400speed.gcode selected for printing
2021-05-30 11:06:26 [info] G10 P0 R205 
2021-05-30 11:06:26 [info] G10 P0 R0 S0	
2021-05-30 11:06:26 [info] G10 P1 R0 S0	
2021-05-30 11:06:26 [info] G10 P2 R0 S0	
2021-05-30 11:06:26 [debug] T0:31.2 /0.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:47.5 /50.0
2021-05-30 11:06:27 [debug] T0:31.2 /0.0 T1:-273.1 /0.0 T2:27.1 /0.0 B:47.5 /50.0
2021-05-30 11:06:28 [debug] T0:31.2 /0.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:47.6 /50.0
2021-05-30 11:06:29 [debug] T0:31.2 /0.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:47.6 /50.0
2021-05-30 11:06:30 [debug] T0:31.2 /0.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:47.7 /50.0
2021-05-30 11:06:31 [debug] T0:31.2 /0.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:47.8 /50.0
2021-05-30 11:06:32 [debug] T0:31.1 /0.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:47.8 /50.0
2021-05-30 11:06:33 [debug] T0:31.1 /0.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:47.9 /50.0
2021-05-30 11:06:34 [debug] T0:31.1 /0.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:47.9 /50.0
2021-05-30 11:06:35 [debug] T0:31.1 /0.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:47.9 /50.0
2021-05-30 11:06:36 [debug] T0:31.1 /0.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:48.0 /50.0
2021-05-30 11:06:36 [info] G10 P0 R175 S205	
2021-05-30 11:07:20 [debug] 1
2021-05-30 11:07:20 [debug] Carriage coupling failed!
2021-05-30 11:07:46 [debug] 1
2021-05-30 11:07:46 [debug] Carriage coupling failed!
2021-05-30 11:08:11 [warn] Leadscrew adjustments made: -0.075 -0.033 -0.018, points used 3, (mean, deviation) before (-0.042, 0.021) after (-0.000, 0.000)
2021-05-30 11:08:11 [debug] Leadscrew adjustments made: -0.075 -0.033 -0.018, points used 3, (mean, deviation) before (-0.042, 0.021) after (-0.000, 0.000)
2021-05-30 11:08:11 [debug] Gantry deviation of 0.021mm obtained.
2021-05-30 11:08:15 [debug] === Diagnostics ===
2021-05-30 11:08:15 [debug] RepRapFirmware for Duet 3 MB6HC version 3.3beta2 running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode)
2021-05-30 11:08:15 [debug] Board ID: 08DJM-956L2-G43S4-6JKDD-3SJ6L-TB62G
2021-05-30 11:08:15 [debug] Used output buffers: 2 of 40 (40 max)
2021-05-30 11:08:15 [debug] === RTOS ===
2021-05-30 11:08:15 [debug] Static ram: 148476
2021-05-30 11:08:15 [debug] Dynamic ram: 95028 of which 0 recycled
2021-05-30 11:08:15 [debug] Never used RAM 107832, free system stack 106 words
2021-05-30 11:08:15 [debug] Tasks:
2021-05-30 11:08:15 [debug]  NETWORK(ready,204)
2021-05-30 11:08:15 [debug]  ETHERNET(notifyWait,117)
2021-05-30 11:08:15 [debug]  HEAT(delaying,284)
2021-05-30 11:08:15 [debug]  CanReceiv(notifyWait,773)
2021-05-30 11:08:15 [debug]  CanSender(notifyWait,360)
2021-05-30 11:08:15 [debug]  CanClock(delaying,341)
2021-05-30 11:08:15 [debug]  TMC(notifyWait,58)
2021-05-30 11:08:15 [debug]  MAIN(running,515)
2021-05-30 11:08:15 [debug]  IDLE(ready,19)
2021-05-30 11:08:15 [debug] 
Owned mutexes:
2021-05-30 11:08:15 [debug]  File(MAIN)
2021-05-30 11:08:15 [debug] === Platform ===
2021-05-30 11:08:15 [debug] Last reset 01:56:54 ago, cause: software
2021-05-30 11:08:15 [debug] Last software reset at 2021-05-30 08:50, reason: User, GCodes spinning, available RAM 105708, slot 2
2021-05-30 11:08:15 [debug] Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task MAIN Freestk 0 n/a
2021-05-30 11:08:15 [debug] Error status: 0x04
2021-05-30 11:08:15 [debug] Aux0 errors 0,0,0
2021-05-30 11:08:15 [debug] Aux1 errors 0,0,0
2021-05-30 11:08:15 [debug] MCU temperature: min 42.4, current 42.9, max 43.4
2021-05-30 11:08:15 [debug] Supply voltage: min 31.8, current 31.9, max 31.9, under voltage events: 0, over voltage events: 0, power good: yes
2021-05-30 11:08:15 [debug] 12V rail voltage: min 12.0, current 12.0, max 12.1, under voltage events: 0
2021-05-30 11:08:15 [debug] Heap OK, handles allocated/used 99/0, heap memory allocated/used/recyclable 2048/272/272, gc cycles 0
2021-05-30 11:08:15 [debug] Driver 0: position 320000, standstill, reads 16273, writes 4 timeouts 0, SG min/max 0/329
2021-05-30 11:08:15 [debug] Driver 1: position 0, standstill, reads 16273, writes 4 timeouts 0, SG min/max 0/404
2021-05-30 11:08:15 [debug] Driver 2: position 28800, standstill, reads 16270, writes 12 timeouts 0, SG min/max 0/158
2021-05-30 11:08:15 [debug] Driver 3: position 0, ok, reads 16273, writes 4 timeouts 0, SG min/max 0/201
2021-05-30 11:08:15 [debug] Driver 4: position 0, ok, reads 16274, writes 4 timeouts 0, SG min/max 0/274
2021-05-30 11:08:15 [debug] Driver 5: position 0, ok, reads 16273, writes 4 timeouts 0, SG min/max 0/233
2021-05-30 11:08:15 [debug] Date/time: 
2021-05-30 11:08:15 [debug] 2021-05-30 11:08:15
2021-05-30 11:08:15 [debug] Slowest loop: 70.54ms; fastest: 0.07ms
2021-05-30 11:08:15 [debug] === Storage ===
Free file entries: 7
2021-05-30 11:08:15 [debug] SD card 0 detected, interface speed: 25.0MBytes/sec
2021-05-30 11:08:15 [debug] SD card longest read time 3.4ms, write time 9.5ms, max retries 0
2021-05-30 11:08:15 [debug] === Move ===
DMs created 125, maxWait 1026028ms, bed compensation in use: none, comp offset 0.000
2021-05-30 11:08:15 [debug] === MainDDARing ===
Scheduled moves 77, completed moves 76, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
2021-05-30 11:08:15 [debug] === AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
2021-05-30 11:08:15 [debug] === Heat ===
Bed heaters =
2021-05-30 11:08:15 [debug]  0
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug] , chamberHeaters =
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug]  -1
2021-05-30 11:08:15 [debug] Heater 0 is on, I-accum = 0.4
2021-05-30 11:08:15 [debug] === GCodes ===
2021-05-30 11:08:15 [debug] Segments left: 0
2021-05-30 11:08:15 [debug] Movement lock held by File
2021-05-30 11:08:15 [debug] HTTP is idle in state(s) 0
2021-05-30 11:08:15 [debug] Telnet is idle in state(s) 0
2021-05-30 11:08:15 [debug] File is ready with "M122 B0	" in state(s) 0 9, running macro
2021-05-30 11:08:15 [debug] USB is idle in state(s) 0
2021-05-30 11:08:15 [debug] Aux is idle in state(s) 0
2021-05-30 11:08:15 [debug] Trigger is idle in state(s) 0
2021-05-30 11:08:15 [debug] Queue is idle in state(s) 0
2021-05-30 11:08:15 [debug] LCD is idle in state(s) 0
2021-05-30 11:08:15 [debug] SBC is idle in state(s) 0
2021-05-30 11:08:15 [debug] Daemon is idle in state(s) 0
2021-05-30 11:08:15 [debug] Aux2 is idle in state(s) 0
2021-05-30 11:08:15 [debug] Autopause is idle in state(s) 0
2021-05-30 11:08:15 [debug] Code queue is empty.
2021-05-30 11:08:15 [debug] === CAN ===
Messages queued 9175, send timeouts 0, received 16224, lost 0, longest wait 20ms for reply type 6024, peak Tx sync delay 683, free buffers 49 (min 47)
2021-05-30 11:08:15 [debug] === Network ===
2021-05-30 11:08:15 [debug] Slowest loop: 93.42ms; fastest: 0.02ms
2021-05-30 11:08:15 [debug] Responder states:
2021-05-30 11:08:15 [debug]  HTTP(0)
2021-05-30 11:08:15 [debug]  HTTP(0)
2021-05-30 11:08:15 [debug]  HTTP(0)
2021-05-30 11:08:15 [debug]  HTTP(0)
2021-05-30 11:08:15 [debug]  HTTP(0)
2021-05-30 11:08:15 [debug]  HTTP(0)
2021-05-30 11:08:15 [debug]  FTP(0)
2021-05-30 11:08:15 [debug]  Telnet(0), 0 sessions
2021-05-30 11:08:15 [debug]  Telnet(0), 0 sessions
2021-05-30 11:08:15 [debug] HTTP sessions: 3 of 8
2021-05-30 11:08:15 [debug] - Ethernet -
State: active
2021-05-30 11:08:15 [debug] Error counts: 0 0 1 0 0
Socket states:
2021-05-30 11:08:15 [debug]  2
2021-05-30 11:08:15 [debug]  2
2021-05-30 11:08:15 [debug]  2
2021-05-30 11:08:15 [debug]  2
2021-05-30 11:08:15 [debug]  2
2021-05-30 11:08:15 [debug]  0
2021-05-30 11:08:15 [debug]  0
2021-05-30 11:08:15 [debug]  0
2021-05-30 11:08:15 [debug] Diagnostics for board 1:
2021-05-30 11:08:15 [debug] Duet EXP3HC firmware version 3.3beta2 (2021-03-10 10:07:35)
Bootloader ID: SAME5x bootloader version 2.2 (2021-01-16b1)
2021-05-30 11:08:15 [debug] Never used RAM 158804, free system stack 0 words
Tasks: Move(notifyWait,100) HEAT(delaying,58) CanAsync(notifyWait,72) CanRecv(notifyWait,82) CanClock(notifyWait,74) TMC(notifyWait,30) MAIN(running,339) AIN(delaying,260)
Last reset 01:57:00 ago, cause: software
2021-05-30 11:08:15 [debug] Last software reset time unknown, reason: AssertionFailed, available RAM 159320, slot 1
Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004754 Task HEAT Freestk 142 bad marker
2021-05-30 11:08:15 [debug] Stack: 00000544 0002eb94 000261af 42000400 000223e3 2002f020 00000000 2002f038 2000151c 00000000 0001d681 0002dd80 0002de38 0002d43c 000b0000 2000159c 00000000 2002f020 00015609 00000000 000009c4 000009c4 a5a5a5a5 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024ff5
2021-05-30 11:08:15 [debug] Driver 0: position -192518, 320.0 steps/mm,  standstill, reads 18493, writes 4 timeouts 0, SG min/max 0/291, steps req 2131840 done 2035559
Driver 1: position -1986, 320.0 steps/mm,  standstill, reads 18492, writes 4 timeouts 0, SG min/max 0/136, steps req 1360000 done 1263719
Driver 2: position 0, 80.0 steps/mm,  standstill, reads 18496, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0
2021-05-30 11:08:15 [debug] Moves scheduled 210405, completed 210405, in progress 0, hiccups 0, step errors 0, maxPrep 71, maxOverdue 1, maxInc 1, mcErrs 0, gcmErrs 0
Peak sync jitter 10, peak Rx sync delay 196, resyncs 2, no step interrupt scheduled
VIN: 32.1V, V12: 12.2V
MCU temperature: min 39.8C, current 40.0C, max 40.2C
Ticks since heat task active 109, ADC conversions started 7020100, completed 7020100, timed out 0
2021-05-30 11:08:15 [debug] Last sensors broadcast 0x00000000 found 0 114 ticks ago, loop time 0
CAN messages queued 4103, send timeouts 0, received 13125, lost 0, free buffers 36, min 36, error reg 0
dup 0, oos 0, bm 0, wbm 0
2021-05-30 11:08:15 [debug] Diagnostics for board 2:
2021-05-30 11:08:15 [debug] Duet EXP3HC firmware version 3.3beta2 (2021-03-10 10:07:35)
Bootloader ID: not available
2021-05-30 11:08:15 [debug] Never used RAM 157852, free system stack 0 words
Tasks: Move(notifyWait,92) HEAT(delaying,60) CanAsync(notifyWait,72) CanRecv(notifyWait,82) CanClock(notifyWait,74) TMC(notifyWait,30) MAIN(running,301) AIN(delaying,260)
Last reset 01:57:00 ago, cause: software
2021-05-30 11:08:15 [debug] Last software reset at 2021-05-29 21:17, reason: AssertionFailed, available RAM 158184, slot 1
Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004764 Task HEAT Freestk 146 ok
2021-05-30 11:08:15 [debug] Stack: 00000544 0002eb10 000260ff 42000400 0002232f 00000000 00000020 2002f020 2000159c 00000003 0001d25b 00000000 2002f020 00000020 000157b1 00000000 00037aa0 00037aa0 41dac600 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024f45 a5a5a5a5 00000058 00000000 2002ee70
2021-05-30 11:08:15 [debug] Driver 0: position 4611118, 830.0 steps/mm,  standstill, reads 25527, writes 2 timeouts 0, SG min/max not available, steps req 0 done 0
Driver 1: position 0, 830.0 steps/mm,  standstill, reads 25527, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0
Driver 2: position 0, 830.0 steps/mm,  standstill, reads 25527, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0
2021-05-30 11:08:15 [debug] Moves scheduled 204021, completed 204021, in progress 0, hiccups 0, step errors 0, maxPrep 0, maxOverdue 0, maxInc 0, mcErrs 0, gcmErrs 0
Peak sync jitter 14, peak Rx sync delay 180, resyncs 0, no step interrupt scheduled
VIN: 24.1V, V12: 12.2V
MCU temperature: min 38.5C, current 38.7C, max 38.7C
Ticks since heat task active 127, ADC conversions started 7020368, completed 7020368, timed out 0
2021-05-30 11:08:15 [debug] Last sensors broadcast 0x0000000e found 3 133 ticks ago, loop time 0
CAN messages queued 11962, send timeouts 0, received 8974, lost 0, free buffers 36, min 36, error reg 0
dup 0, oos 0, bm 0, wbm 0
2021-05-30 11:08:17 [debug] T:175.0 /205.0 T0:175.0 /205.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:50.8 /50.0
2021-05-30 11:08:18 [debug] T:175.3 /205.0 T0:175.3 /205.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:50.8 /50.0
2021-05-30 11:08:19 [debug] T:176.4 /205.0 T0:176.4 /205.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:50.8 /50.0
2021-05-30 11:08:20 [debug] T:178.1 /205.0 T0:178.1 /205.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:50.8 /50.0
2021-05-30 11:08:21 [debug] T:180.1 /205.0 T0:180.1 /205.0 T1:-273.1 /0.0 T2:27.1 /0.0 B:50.9 /50.0
2021-05-30 11:08:22 [debug] T:182.5 /205.0 T0:182.5 /205.0 T1:-273.1 /0.0 T2:27.1 /0.0 B:50.9 /50.0
2021-05-30 11:08:23 [debug] T:185.1 /205.0 T0:185.1 /205.0 T1:-273.1 /0.0 T2:27.1 /0.0 B:50.9 /50.0
2021-05-30 11:08:24 [debug] T:187.8 /205.0 T0:187.8 /205.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:50.9 /50.0
2021-05-30 11:08:25 [debug] T:190.6 /205.0 T0:190.6 /205.0 T1:-273.1 /0.0 T2:27.3 /0.0 B:50.9 /50.0
2021-05-30 11:08:26 [debug] T:193.4 /205.0 T0:193.4 /205.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:50.9 /50.0
2021-05-30 11:08:27 [debug] T:196.2 /205.0 T0:196.2 /205.0 T1:-273.1 /0.0 T2:27.2 /0.0 B:50.9 /50.0
2021-05-30 11:08:28 [debug] T:198.8 /205.0 T0:198.8 /205.0 T1:-273.1 /0.0 T2:27.1 /0.0 B:50.9 /50.0
2021-05-30 11:08:28 [debug] X-Max Deactivated
2021-05-30 11:16:03 [info] G10 P0 S220
2021-05-30 11:16:28 [info] G10 P0 S235
2021-05-30 11:55:08 [info] G10 P0 S0 R0	
2021-05-30 11:55:08 [info] G10 P1 S0 R0	
2021-05-30 11:55:08 [info] G10 P2 S0 R0	
2021-05-30 11:55:15 [debug] Done printing file
2021-05-30 11:55:15 [debug] Done printing file
2021-05-30 11:55:15 [warn] Finished printing file 0:/gcodes/ScrewMount_x400speed.gcode, print time was 0h 48m
2021-05-30 11:55:49 [debug] Diagnostics for board 2:
2021-05-30 11:55:49 [debug] Duet EXP3HC firmware version 3.3beta2 (2021-03-10 10:07:35)
Bootloader ID: not available
2021-05-30 11:55:49 [debug] Never used RAM 157852, free system stack 0 words
Tasks: Move(notifyWait,92) HEAT(delaying,60) CanAsync(notifyWait,72) CanRecv(notifyWait,82) CanClock(notifyWait,74) TMC(notifyWait,30) MAIN(running,301) AIN(delaying,260)
Last reset 02:44:34 ago, cause: software
2021-05-30 11:55:49 [debug] Last software reset at 2021-05-29 21:17, reason: AssertionFailed, available RAM 158184, slot 1
Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004764 Task HEAT Freestk 146 ok
2021-05-30 11:55:49 [debug] Stack: 00000544 0002eb10 000260ff 42000400 0002232f 00000000 00000020 2002f020 2000159c 00000003 0001d25b 00000000 2002f020 00000020 000157b1 00000000 00037aa0 00037aa0 41dac600 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024f45 a5a5a5a5 00000058 00000000 2002ee70
2021-05-30 11:55:49 [debug] Driver 0: position 9374371, 830.0 steps/mm,  standstill, reads 50221, writes 2 timeouts 0, SG min/max 0/1023, steps req 8441325 done 8441325
Driver 1: position 0, 830.0 steps/mm,  standstill, reads 50223, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0
Driver 2: position 0, 830.0 steps/mm,  standstill, reads 50223, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0
2021-05-30 11:55:49 [debug] Moves scheduled 407916, completed 407916, in progress 0, hiccups 0, step errors 0, maxPrep 57, maxOverdue 0, maxInc 0, mcErrs 0, gcmErrs 0
Peak sync jitter 13, peak Rx sync delay 185, resyncs 0, no step interrupt scheduled
VIN: 24.1V, V12: 12.2V
MCU temperature: min 38.5C, current 38.7C, max 38.7C
Ticks since heat task active 110, ADC conversions started 9874602, completed 9874601, timed out 0
2021-05-30 11:55:49 [debug] Last sensors broadcast 0x0000000e found 3 115 ticks ago, loop time 0
CAN messages queued 34634, send timeouts 0, received 229938, lost 0, free buffers 36, min 36, error reg 0
dup 0, oos 2, bm 0, wbm 0
2021-05-30 11:55:59 [debug] Diagnostics for board 1:
2021-05-30 11:55:59 [debug] Duet EXP3HC firmware version 3.3beta2 (2021-03-10 10:07:35)
Bootloader ID: SAME5x bootloader version 2.2 (2021-01-16b1)
2021-05-30 11:55:59 [debug] Never used RAM 158804, free system stack 0 words
Tasks: Move(notifyWait,100) HEAT(delaying,58) CanAsync(notifyWait,72) CanRecv(notifyWait,82) CanClock(notifyWait,74) TMC(notifyWait,30) MAIN(running,339) AIN(delaying,260)
Last reset 02:44:43 ago, cause: software
2021-05-30 11:55:59 [debug] Last software reset time unknown, reason: AssertionFailed, available RAM 159320, slot 1
Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004754 Task HEAT Freestk 142 bad marker
2021-05-30 11:55:59 [debug] Stack: 00000544 0002eb94 000261af 42000400 000223e3 2002f020 00000000 2002f038 2000151c 00000000 0001d681 0002dd80 0002de38 0002d43c 000b0000 2000159c 00000000 2002f020 00015609 00000000 000009c4 000009c4 a5a5a5a5 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024ff5
2021-05-30 11:55:59 [debug] Driver 0: position -192290, 320.0 steps/mm,  standstill, reads 54415, writes 0 timeouts 0, SG min/max 0/1023, steps req 60331246 done 60331246
Driver 1: position -1940, 320.0 steps/mm,  standstill, reads 54414, writes 0 timeouts 0, SG min/max 0/1023, steps req 54769546 done 54769546
Driver 2: position 0, 80.0 steps/mm,  standstill, reads 54414, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0
2021-05-30 11:55:59 [debug] Moves scheduled 420730, completed 420730, in progress 0, hiccups 0, step errors 0, maxPrep 253, maxOverdue 4, maxInc 1, mcErrs 0, gcmErrs 0
Peak sync jitter 10, peak Rx sync delay 207, resyncs 8, no step interrupt scheduled
VIN: 32.1V, V12: 12.2V
MCU temperature: min 39.8C, current 40.0C, max 40.2C
Ticks since heat task active 65, ADC conversions started 9883806, completed 9883806, timed out 0
2021-05-30 11:55:59 [debug] Last sensors broadcast 0x00000000 found 0 74 ticks ago, loop time 0
CAN messages queued 11494, send timeouts 0, received 247565, lost 0, free buffers 36, min 36, error reg 0
dup 0, oos 3, bm 0, wbm 0
2021-05-30 11:56:02 [debug] === Diagnostics ===
2021-05-30 11:56:02 [debug] RepRapFirmware for Duet 3 MB6HC version 3.3beta2 running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode)
2021-05-30 11:56:02 [debug] Board ID: 08DJM-956L2-G43S4-6JKDD-3SJ6L-TB62G
2021-05-30 11:56:02 [debug] Used output buffers: 1 of 40 (40 max)
2021-05-30 11:56:02 [debug] === RTOS ===
2021-05-30 11:56:02 [debug] Static ram: 148476
2021-05-30 11:56:02 [debug] Dynamic ram: 95028 of which 0 recycled
2021-05-30 11:56:02 [debug] Never used RAM 107832, free system stack 106 words
2021-05-30 11:56:02 [debug] Tasks:
2021-05-30 11:56:02 [debug]  NETWORK(ready,202)
2021-05-30 11:56:02 [debug]  ETHERNET(notifyWait,117)
2021-05-30 11:56:02 [debug]  HEAT(delaying,284)
2021-05-30 11:56:02 [debug]  CanReceiv(notifyWait,773)
2021-05-30 11:56:02 [debug]  CanSender(notifyWait,358)
2021-05-30 11:56:02 [debug]  CanClock(delaying,341)
2021-05-30 11:56:02 [debug]  TMC(notifyWait,58)
2021-05-30 11:56:02 [debug]  MAIN(running,515)
2021-05-30 11:56:02 [debug]  IDLE(ready,19)
2021-05-30 11:56:02 [debug] 
Owned mutexes:
2021-05-30 11:56:02 [debug]  HTTP(MAIN)
2021-05-30 11:56:02 [debug] === Platform ===
2021-05-30 11:56:02 [debug] Last reset 02:44:41 ago, cause: software
2021-05-30 11:56:02 [debug] Last software reset at 2021-05-30 08:50, reason: User, GCodes spinning, available RAM 105708, slot 2
2021-05-30 11:56:02 [debug] Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task MAIN Freestk 0 n/a
2021-05-30 11:56:02 [debug] Error status: 0x04
2021-05-30 11:56:02 [debug] Aux0 errors 0,0,0
2021-05-30 11:56:02 [debug] Aux1 errors 0,0,0
2021-05-30 11:56:02 [debug] MCU temperature: min 41.8, current 42.2, max 43.2
2021-05-30 11:56:02 [debug] Supply voltage: min 31.8, current 31.9, max 31.9, under voltage events: 0, over voltage events: 0, power good: yes
2021-05-30 11:56:02 [debug] 12V rail voltage: min 12.0, current 12.0, max 12.1, under voltage events: 0
2021-05-30 11:56:02 [debug] Heap OK, handles allocated/used 99/0, heap memory allocated/used/recyclable 2048/322/322, gc cycles 0
2021-05-30 11:56:02 [debug] Driver 0: position 320000, standstill, reads 3365, writes 0 timeouts 0, SG min/max 0/1023
2021-05-30 11:56:02 [debug] Driver 1: position 0, standstill, reads 3366, writes 0 timeouts 0, SG min/max 0/1023
2021-05-30 11:56:02 [debug] Driver 2: position 134880, standstill, reads 3361, writes 4 timeouts 0, SG min/max 0/152
2021-05-30 11:56:02 [debug] Driver 3: position 0, standstill, reads 3365, writes 0 timeouts 0, SG min/max 0/144
2021-05-30 11:56:02 [debug] Driver 4: position 0, standstill, reads 3365, writes 0 timeouts 0, SG min/max 0/164
2021-05-30 11:56:02 [debug] Driver 5: position 0, standstill, reads 3365, writes 0 timeouts 0, SG min/max 0/760
2021-05-30 11:56:02 [debug] Date/time: 
2021-05-30 11:56:02 [debug] 2021-05-30 11:56:02
2021-05-30 11:56:02 [debug] Slowest loop: 69.40ms; fastest: 0.07ms
2021-05-30 11:56:02 [debug] === Storage ===
Free file entries: 9
2021-05-30 11:56:02 [debug] SD card 0 detected, interface speed: 25.0MBytes/sec
2021-05-30 11:56:02 [debug] SD card longest read time 3.4ms, write time 4.7ms, max retries 0
2021-05-30 11:56:02 [debug] === Move ===
DMs created 125, maxWait 11661ms, bed compensation in use: none, comp offset 0.000
2021-05-30 11:56:02 [debug] === MainDDARing ===
Scheduled moves 211676, completed moves 211676, hiccups 0, stepErrors 0, LaErrors 0, Underruns [2569, 0, 0], CDDA state -1
2021-05-30 11:56:02 [debug] === AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
2021-05-30 11:56:02 [debug] === Heat ===
Bed heaters =
2021-05-30 11:56:02 [debug]  0
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug] , chamberHeaters =
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug]  -1
2021-05-30 11:56:02 [debug] Heater 0 is on, I-accum = 0.1
2021-05-30 11:56:02 [debug] === GCodes ===
2021-05-30 11:56:02 [debug] Segments left: 0
2021-05-30 11:56:02 [debug] Movement lock held by null
2021-05-30 11:56:02 [debug] HTTP is ready with "m122 b0" in state(s) 0
2021-05-30 11:56:02 [debug] Telnet is idle in state(s) 0
2021-05-30 11:56:02 [debug] File is idle in state(s) 0
2021-05-30 11:56:02 [debug] USB is idle in state(s) 0
2021-05-30 11:56:02 [debug] Aux is idle in state(s) 0
2021-05-30 11:56:02 [debug] Trigger is idle in state(s) 0
2021-05-30 11:56:02 [debug] Queue is idle in state(s) 0
2021-05-30 11:56:02 [debug] LCD is idle in state(s) 0
2021-05-30 11:56:02 [debug] SBC is idle in state(s) 0
2021-05-30 11:56:02 [debug] Daemon is idle in state(s) 0
2021-05-30 11:56:02 [debug] Aux2 is idle in state(s) 0
2021-05-30 11:56:02 [debug] Autopause is idle in state(s) 0
2021-05-30 11:56:02 [debug] Code queue is empty.
2021-05-30 11:56:02 [debug] === CAN ===
Messages queued 440417, send timeouts 938, received 46372, lost 0, longest wait 20ms for reply type 6024, peak Tx sync delay 683, free buffers 49 (min 18)
2021-05-30 11:56:02 [debug] Last cancelled message type 51 dest 2
2021-05-30 11:56:02 [debug] === Network ===
2021-05-30 11:56:02 [debug] Slowest loop: 21.77ms; fastest: 0.02ms
2021-05-30 11:56:02 [debug] Responder states:
2021-05-30 11:56:02 [debug]  HTTP(0)
2021-05-30 11:56:02 [debug]  HTTP(0)
2021-05-30 11:56:02 [debug]  HTTP(0)
2021-05-30 11:56:02 [debug]  HTTP(0)
2021-05-30 11:56:02 [debug]  HTTP(0)
2021-05-30 11:56:02 [debug]  HTTP(0)
2021-05-30 11:56:02 [debug]  FTP(0)
2021-05-30 11:56:02 [debug]  Telnet(0), 0 sessions
2021-05-30 11:56:02 [debug]  Telnet(0), 0 sessions
2021-05-30 11:56:02 [debug] HTTP sessions: 2 of 8
2021-05-30 11:56:02 [debug] - Ethernet -
State: active
2021-05-30 11:56:02 [debug] Error counts: 0 0 1 0 0
Socket states:
2021-05-30 11:56:02 [debug]  5
2021-05-30 11:56:02 [debug]  2
2021-05-30 11:56:02 [debug]  2
2021-05-30 11:56:02 [debug]  2
2021-05-30 11:56:02 [debug]  2
2021-05-30 11:56:02 [debug]  0
2021-05-30 11:56:02 [debug]  0
2021-05-30 11:56:02 [debug]  0