2021-05-30 15:15:31 [debug] DDAs 60, DMs 125, GracePeriod 0 2021-05-30 15:16:07 [warn] Started printing file 0:/gcodes/ScrewMount_x400speed.gcode 2021-05-30 15:16:07 [debug] File 0:/gcodes/ScrewMount_x400speed.gcode selected for printing 2021-05-30 15:16:07 [info] G10 P0 R205 2021-05-30 15:16:07 [info] G10 P0 R0 S0 2021-05-30 15:16:07 [info] G10 P1 R0 S0 2021-05-30 15:16:07 [info] G10 P2 R0 S0 2021-05-30 15:16:07 [info] G10 P0 R175 S205 2021-05-30 15:16:35 [debug] 1 2021-05-30 15:16:35 [debug] Carriage coupling failed! 2021-05-30 15:16:52 [debug] 1 2021-05-30 15:16:52 [debug] Carriage coupling failed! 2021-05-30 15:17:17 [warn] Leadscrew adjustments made: -0.045 -0.031 -0.034, points used 3, (mean, deviation) before (-0.037, 0.005) after (0.000, 0.000) 2021-05-30 15:17:17 [debug] Leadscrew adjustments made: -0.045 -0.031 -0.034, points used 3, (mean, deviation) before (-0.037, 0.005) after (0.000, 0.000) 2021-05-30 15:17:17 [debug] Gantry deviation of 0.005mm obtained. 2021-05-30 15:17:22 [debug] === Diagnostics === 2021-05-30 15:17:22 [debug] RepRapFirmware for Duet 3 MB6HC version 3.3beta3 (2021-04-22 16:28:03) running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode) 2021-05-30 15:17:22 [debug] Board ID: 08DJM-956L2-G43S4-6JKDD-3SJ6L-TB62G 2021-05-30 15:17:22 [debug] Used output buffers: 2 of 40 (31 max) 2021-05-30 15:17:22 [debug] === RTOS === 2021-05-30 15:17:22 [debug] Static ram: 149960 2021-05-30 15:17:22 [debug] Dynamic ram: 94972 of which 0 recycled 2021-05-30 15:17:22 [debug] Never used RAM 106404, free system stack 126 words 2021-05-30 15:17:22 [debug] Tasks: 2021-05-30 15:17:22 [debug] NETWORK(ready,27.1%,196) 2021-05-30 15:17:22 [debug] ETHERNET(notifyWait,0.3%,120) 2021-05-30 15:17:22 [debug] HEAT(delaying,0.0%,275) 2021-05-30 15:17:22 [debug] Move(notifyWait,0.0%,26) 2021-05-30 15:17:22 [debug] CanReceiv(notifyWait,0.0%,798) 2021-05-30 15:17:22 [debug] CanSender(notifyWait,0.0%,359) 2021-05-30 15:17:22 [debug] CanClock(delaying,0.0%,341) 2021-05-30 15:17:22 [debug] TMC(notifyWait,8.0%,59) 2021-05-30 15:17:22 [debug] MAIN(running,64.4%,516) 2021-05-30 15:17:22 [debug] IDLE(ready,0.0%,19) 2021-05-30 15:17:22 [debug] , total 100.0% Owned mutexes: 2021-05-30 15:17:22 [debug] File(MAIN) 2021-05-30 15:17:22 [debug] === Platform === 2021-05-30 15:17:22 [debug] Last reset 00:06:18 ago, cause: software 2021-05-30 15:17:22 [debug] Last software reset at 2021-05-30 15:11, reason: User, GCodes spinning, available RAM 106228, slot 2 2021-05-30 15:17:22 [debug] Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task MAIN Freestk 0 n/a 2021-05-30 15:17:22 [debug] Error status: 0x00 2021-05-30 15:17:22 [debug] Aux0 errors 0,0,0 2021-05-30 15:17:22 [debug] Aux1 errors 0,0,0 2021-05-30 15:17:22 [debug] Step timer max interval 134 2021-05-30 15:17:22 [debug] MCU temperature: min 42.9, current 43.2, max 44.3 2021-05-30 15:17:22 [debug] Supply voltage: min 31.8, current 31.9, max 31.9, under voltage events: 0, over voltage events: 0, power good: yes 2021-05-30 15:17:22 [debug] 12V rail voltage: min 12.0, current 12.0, max 12.1, under voltage events: 0 2021-05-30 15:17:22 [debug] Heap OK, handles allocated/used 99/0, heap memory allocated/used/recyclable 2048/108/108, gc cycles 0 2021-05-30 15:17:22 [debug] Driver 0: position 320000, standstill, reads 491, writes 19 timeouts 0, SG min/max 0/150 2021-05-30 15:17:22 [debug] Driver 1: position 0, standstill, reads 492, writes 19 timeouts 0, SG min/max 0/149 2021-05-30 15:17:22 [debug] Driver 2: position 28800, standstill, reads 491, writes 25 timeouts 0, SG min/max 0/156 2021-05-30 15:17:22 [debug] Driver 3: position 0, ok, reads 499, writes 17 timeouts 0, SG min/max 0/147 2021-05-30 15:17:22 [debug] Driver 4: position 0, ok, reads 500, writes 17 timeouts 0, SG min/max 0/496 2021-05-30 15:17:22 [debug] Driver 5: position 0, ok, reads 500, writes 17 timeouts 0, SG min/max 0/103 2021-05-30 15:17:22 [debug] Date/time: 2021-05-30 15:17:22 [debug] 2021-05-30 15:17:22 2021-05-30 15:17:22 [debug] Slowest loop: 71.18ms; fastest: 0.05ms 2021-05-30 15:17:22 [debug] === Storage === Free file entries: 7 2021-05-30 15:17:22 [debug] SD card 0 detected, interface speed: 25.0MBytes/sec 2021-05-30 15:17:22 [debug] SD card longest read time 3.2ms, write time 3.6ms, max retries 0 2021-05-30 15:17:22 [debug] === Move === DMs created 125, maxWait 304181ms, bed compensation in use: none, comp offset 0.000 2021-05-30 15:17:22 [debug] === MainDDARing === Scheduled moves 77, completed moves 76, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state 3 2021-05-30 15:17:22 [debug] === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 2021-05-30 15:17:22 [debug] === Heat === Bed heaters = 2021-05-30 15:17:22 [debug] 0 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] , chamberHeaters = 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] -1 2021-05-30 15:17:22 [debug] Heater 0 is on, I-accum = 0.1 2021-05-30 15:17:22 [debug] === GCodes === 2021-05-30 15:17:22 [debug] Segments left: 0 2021-05-30 15:17:22 [debug] Movement lock held by File 2021-05-30 15:17:22 [debug] HTTP is idle in state(s) 0 2021-05-30 15:17:22 [debug] Telnet is idle in state(s) 0 2021-05-30 15:17:22 [debug] File is ready with "M122 B0 " in state(s) 0 15, running macro 2021-05-30 15:17:22 [debug] USB is idle in state(s) 0 2021-05-30 15:17:22 [debug] Aux is idle in state(s) 0 2021-05-30 15:17:22 [debug] Trigger is idle in state(s) 0 2021-05-30 15:17:22 [debug] Queue is idle in state(s) 0 2021-05-30 15:17:22 [debug] LCD is idle in state(s) 0 2021-05-30 15:17:22 [debug] SBC is idle in state(s) 0 2021-05-30 15:17:22 [debug] Daemon is idle in state(s) 0 2021-05-30 15:17:22 [debug] Aux2 is idle in state(s) 0 2021-05-30 15:17:22 [debug] Autopause is idle in state(s) 0 2021-05-30 15:17:22 [debug] Code queue is empty. 2021-05-30 15:17:22 [debug] === CAN === Messages queued 3587, send timeouts 0, received 6203, lost 0, longest wait 1ms for reply type 6018, peak Tx sync delay 134, free buffers 49 (min 47) 2021-05-30 15:17:22 [debug] === Network === 2021-05-30 15:17:22 [debug] Slowest loop: 14.61ms; fastest: 0.02ms 2021-05-30 15:17:22 [debug] Responder states: 2021-05-30 15:17:22 [debug] HTTP(0) 2021-05-30 15:17:22 [debug] HTTP(0) 2021-05-30 15:17:22 [debug] HTTP(0) 2021-05-30 15:17:22 [debug] HTTP(0) 2021-05-30 15:17:22 [debug] HTTP(0) 2021-05-30 15:17:22 [debug] HTTP(0) 2021-05-30 15:17:22 [debug] FTP(0) 2021-05-30 15:17:22 [debug] Telnet(0), 0 sessions 2021-05-30 15:17:22 [debug] Telnet(0), 0 sessions 2021-05-30 15:17:22 [debug] HTTP sessions: 3 of 8 2021-05-30 15:17:22 [debug] - Ethernet - State: active 2021-05-30 15:17:22 [debug] Error counts: 0 0 1 1 0 Socket states: 2021-05-30 15:17:22 [debug] 2 2021-05-30 15:17:22 [debug] 2 2021-05-30 15:17:22 [debug] 2 2021-05-30 15:17:22 [debug] 2 2021-05-30 15:17:22 [debug] 2 2021-05-30 15:17:22 [debug] 0 2021-05-30 15:17:22 [debug] 0 2021-05-30 15:17:22 [debug] 0 2021-05-30 15:17:22 [debug] Diagnostics for board 1: 2021-05-30 15:17:22 [debug] Duet EXP3HC firmware version 3.3beta3 (2021-04-21 20:41:46) Bootloader ID: SAME5x bootloader version 2.2 (2021-01-16b1) 2021-05-30 15:17:22 [debug] Never used RAM 158864, free system stack 0 words Tasks: Move(notifyWait,0.0%,125) HEAT(delaying,0.0%,63) CanAsync(notifyWait,0.0%,72) CanRecv(notifyWait,0.0%,81) CanClock(notifyWait,0.0%,74) TMC(notifyWait,23.6%,29) MAIN(running,74.9%,371) AIN(delaying,1.4%,263), total 100.0% Last reset 00:06:19 ago, cause: software 2021-05-30 15:17:22 [debug] Last software reset time unknown, reason: AssertionFailed, available RAM 159320, slot 1 Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004754 Task HEAT Freestk 142 bad marker 2021-05-30 15:17:22 [debug] Stack: 00000544 0002eb94 000261af 42000400 000223e3 2002f020 00000000 2002f038 2000151c 00000000 0001d681 0002dd80 0002de38 0002d43c 000b0000 2000159c 00000000 2002f020 00015609 00000000 000009c4 000009c4 a5a5a5a5 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024ff5 2021-05-30 15:17:22 [debug] Driver 0: position -96320, 320.0 steps/mm, standstill, reads 32763, writes 19 timeouts 0, SG min/max 0/124, steps req 2131840 done 1885234 Driver 1: position -960, 320.0 steps/mm, standstill, reads 32766, writes 19 timeouts 0, SG min/max 0/257, steps req 1360000 done 1113394 Driver 2: position 0, 80.0 steps/mm, standstill, reads 32778, writes 11 timeouts 0, SG min/max 0/0, steps req 0 done 0 2021-05-30 15:17:22 [debug] Moves scheduled 40, completed 40, in progress 0, hiccups 0, step errors 0, maxPrep 72, maxOverdue 0, maxInc 0, mcErrs 0, gcmErrs 0 Peak sync jitter 9, peak Rx sync delay 201, resyncs 1, no step interrupt scheduled VIN: 32.1V, V12: 12.1V MCU temperature: min 38.9C, current 39.6C, max 40.4C Ticks since heat task active 50, ADC conversions started 379682, completed 379682, timed out 0, errs 0 2021-05-30 15:17:22 [debug] Last sensors broadcast 0x00000000 found 0 56 ticks ago, loop time 0 CAN messages queued 1626, send timeouts 0, received 5042, lost 0, free buffers 36, min 36, error reg 0 dup 0, oos 0, bm 0, wbm 0 2021-05-30 15:17:22 [debug] Diagnostics for board 2: 2021-05-30 15:17:22 [debug] Duet EXP3HC firmware version 3.3beta3 (2021-04-21 20:41:46) Bootloader ID: not available 2021-05-30 15:17:22 [debug] Never used RAM 157912, free system stack 0 words Tasks: Move(notifyWait,0.0%,160) HEAT(delaying,0.0%,88) CanAsync(notifyWait,0.0%,72) CanRecv(notifyWait,0.0%,83) CanClock(notifyWait,0.0%,74) TMC(notifyWait,23.0%,63) MAIN(running,75.6%,301) AIN(delaying,1.4%,263), total 100.0% Last reset 00:06:19 ago, cause: software 2021-05-30 15:17:22 [debug] Last software reset at 2021-05-29 21:17, reason: AssertionFailed, available RAM 158184, slot 1 Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004764 Task HEAT Freestk 146 ok 2021-05-30 15:17:22 [debug] Stack: 00000544 0002eb10 000260ff 42000400 0002232f 00000000 00000020 2002f020 2000159c 00000003 0001d25b 00000000 2002f020 00000020 000157b1 00000000 00037aa0 00037aa0 41dac600 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024f45 a5a5a5a5 00000058 00000000 2002ee70 2021-05-30 15:17:22 [debug] Driver 0: position 0, 830.0 steps/mm, standstill, reads 5740, writes 16 timeouts 0, SG min/max 0/0, steps req 0 done 0 Driver 1: position 0, 830.0 steps/mm, standstill, reads 5742, writes 16 timeouts 0, SG min/max 0/0, steps req 0 done 0 Driver 2: position 0, 830.0 steps/mm, standstill, reads 5746, writes 16 timeouts 0, SG min/max 0/0, steps req 0 done 0 2021-05-30 15:17:22 [debug] Moves scheduled 0, completed 0, in progress 0, hiccups 0, step errors 0, maxPrep 0, maxOverdue 0, maxInc 0, mcErrs 0, gcmErrs 0 Peak sync jitter 13, peak Rx sync delay 179, resyncs 0, no step interrupt scheduled VIN: 24.1V, V12: 12.2V MCU temperature: min 40.4C, current 40.4C, max 41.2C Ticks since heat task active 129, ADC conversions started 379759, completed 379759, timed out 0, errs 0 2021-05-30 15:17:22 [debug] Last sensors broadcast 0x0000000e found 3 138 ticks ago, loop time 0 CAN messages queued 4649, send timeouts 0, received 3507, lost 0, free buffers 36, min 36, error reg 100000 dup 0, oos 0, bm 0, wbm 0 2021-05-30 15:17:23 [debug] T:175.0 /205.0 T0:175.0 /205.0 T1:-273.1 /0.0 T2:27.9 /0.0 B:49.9 /50.0 2021-05-30 15:17:24 [debug] T:175.2 /205.0 T0:175.2 /205.0 T1:-273.1 /0.0 T2:27.9 /0.0 B:49.9 /50.0 2021-05-30 15:17:25 [debug] T:176.0 /205.0 T0:176.0 /205.0 T1:-273.1 /0.0 T2:27.9 /0.0 B:50.0 /50.0 2021-05-30 15:17:26 [debug] T:177.6 /205.0 T0:177.6 /205.0 T1:-273.1 /0.0 T2:27.8 /0.0 B:50.0 /50.0 2021-05-30 15:17:27 [debug] T:179.5 /205.0 T0:179.5 /205.0 T1:-273.1 /0.0 T2:27.7 /0.0 B:50.0 /50.0 2021-05-30 15:17:28 [debug] T:181.9 /205.0 T0:181.9 /205.0 T1:-273.1 /0.0 T2:27.7 /0.0 B:50.0 /50.0 2021-05-30 15:17:29 [debug] T:184.4 /205.0 T0:184.4 /205.0 T1:-273.1 /0.0 T2:27.7 /0.0 B:50.0 /50.0 2021-05-30 15:17:30 [debug] T:187.1 /205.0 T0:187.1 /205.0 T1:-273.1 /0.0 T2:27.7 /0.0 B:50.0 /50.0 2021-05-30 15:17:31 [debug] T:189.8 /205.0 T0:189.8 /205.0 T1:-273.1 /0.0 T2:27.8 /0.0 B:50.0 /50.0 2021-05-30 15:17:32 [debug] T:192.6 /205.0 T0:192.6 /205.0 T1:-273.1 /0.0 T2:27.8 /0.0 B:50.0 /50.0 2021-05-30 15:17:33 [debug] T:195.4 /205.0 T0:195.4 /205.0 T1:-273.1 /0.0 T2:27.8 /0.0 B:50.0 /50.0 2021-05-30 15:17:34 [debug] T:198.0 /205.0 T0:198.0 /205.0 T1:-273.1 /0.0 T2:27.8 /0.0 B:50.0 /50.0 2021-05-30 15:17:35 [debug] X-Max Deactivated 2021-05-30 15:19:12 [warn] Warning: Discarded msg src=2 typ=4510 RID=140 exp 141 2021-05-30 15:19:12 [info] G10 P0 S235 2021-05-30 15:23:32 [warn] Resume state saved 2021-05-30 15:23:33 [warn] Printing paused at X229.6 Y249.9 Z1.5 U101.1 2021-05-30 15:23:33 [debug] Printing paused at X229.6 Y249.9 Z1.5 U101.1 2021-05-30 15:23:40 [debug] === Diagnostics === 2021-05-30 15:23:40 [debug] RepRapFirmware for Duet 3 MB6HC version 3.3beta3 (2021-04-22 16:28:03) running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode) 2021-05-30 15:23:40 [debug] Board ID: 08DJM-956L2-G43S4-6JKDD-3SJ6L-TB62G 2021-05-30 15:23:40 [debug] Used output buffers: 1 of 40 (40 max) 2021-05-30 15:23:40 [debug] === RTOS === 2021-05-30 15:23:40 [debug] Static ram: 149960 2021-05-30 15:23:40 [debug] Dynamic ram: 94972 of which 0 recycled 2021-05-30 15:23:40 [debug] Never used RAM 106404, free system stack 115 words 2021-05-30 15:23:40 [debug] Tasks: 2021-05-30 15:23:40 [debug] NETWORK(ready,24.7%,194) 2021-05-30 15:23:40 [debug] ETHERNET(notifyWait,0.4%,120) 2021-05-30 15:23:40 [debug] HEAT(delaying,0.0%,275) 2021-05-30 15:23:40 [debug] Move(notifyWait,0.7%,26) 2021-05-30 15:23:40 [debug] CanReceiv(notifyWait,0.0%,773) 2021-05-30 15:23:40 [debug] CanSender(notifyWait,0.0%,359) 2021-05-30 15:23:40 [debug] CanClock(delaying,0.0%,341) 2021-05-30 15:23:40 [debug] TMC(notifyWait,9.2%,59) 2021-05-30 15:23:40 [debug] MAIN(running,65.0%,516) 2021-05-30 15:23:40 [debug] IDLE(ready,0.0%,19) 2021-05-30 15:23:40 [debug] , total 100.0% Owned mutexes: 2021-05-30 15:23:40 [debug] HTTP(MAIN) 2021-05-30 15:23:40 [debug] === Platform === 2021-05-30 15:23:40 [debug] Last reset 00:12:37 ago, cause: software 2021-05-30 15:23:40 [debug] Last software reset at 2021-05-30 15:11, reason: User, GCodes spinning, available RAM 106228, slot 2 2021-05-30 15:23:40 [debug] Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00400000 BFAR 0x00000000 SP 0x00000000 Task MAIN Freestk 0 n/a 2021-05-30 15:23:40 [debug] Error status: 0x04 2021-05-30 15:23:40 [debug] Aux0 errors 0,0,0 2021-05-30 15:23:40 [debug] Aux1 errors 0,0,0 2021-05-30 15:23:40 [debug] Step timer max interval 236 2021-05-30 15:23:40 [debug] MCU temperature: min 42.9, current 44.1, max 44.2 2021-05-30 15:23:40 [debug] Supply voltage: min 31.8, current 31.8, max 31.9, under voltage events: 0, over voltage events: 0, power good: yes 2021-05-30 15:23:40 [debug] 12V rail voltage: min 12.0, current 12.0, max 12.1, under voltage events: 0 2021-05-30 15:23:40 [debug] Heap OK, handles allocated/used 99/1, heap memory allocated/used/recyclable 2048/158/128, gc cycles 0 2021-05-30 15:23:40 [debug] Driver 0: position 153213, standstill, reads 32118, writes 0 timeouts 0, SG min/max 0/1023 2021-05-30 15:23:40 [debug] Driver 1: position -7220, standstill, reads 32117, writes 0 timeouts 0, SG min/max 0/1023 2021-05-30 15:23:40 [debug] Driver 2: position 22944, standstill, reads 32114, writes 4 timeouts 0, SG min/max 0/142 2021-05-30 15:23:40 [debug] Driver 3: position 291, standstill, reads 32119, writes 0 timeouts 0, SG min/max 0/146 2021-05-30 15:23:40 [debug] Driver 4: position 0, standstill, reads 32118, writes 0 timeouts 0, SG min/max 0/161 2021-05-30 15:23:40 [debug] Driver 5: position 0, standstill, reads 32119, writes 0 timeouts 0, SG min/max 0/102 2021-05-30 15:23:40 [debug] Date/time: 2021-05-30 15:23:40 [debug] 2021-05-30 15:23:40 2021-05-30 15:23:40 [debug] Slowest loop: 59.62ms; fastest: 0.04ms 2021-05-30 15:23:40 [debug] === Storage === Free file entries: 8 2021-05-30 15:23:40 [debug] SD card 0 detected, interface speed: 25.0MBytes/sec 2021-05-30 15:23:40 [debug] SD card longest read time 3.3ms, write time 3.6ms, max retries 0 2021-05-30 15:23:40 [debug] === Move === DMs created 125, maxWait 11785ms, bed compensation in use: none, comp offset 0.000 2021-05-30 15:23:40 [debug] === MainDDARing === Scheduled moves 17004, completed moves 17004, hiccups 0, stepErrors 0, LaErrors 0, Underruns [475, 11, 0], CDDA state -1 2021-05-30 15:23:40 [debug] === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 2021-05-30 15:23:40 [debug] === Heat === Bed heaters = 2021-05-30 15:23:40 [debug] 0 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] , chamberHeaters = 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] -1 2021-05-30 15:23:40 [debug] Heater 0 is on, I-accum = 0.1 2021-05-30 15:23:40 [debug] Heater 1 is on, I-accum = 0.0 2021-05-30 15:23:40 [debug] === GCodes === 2021-05-30 15:23:40 [debug] Segments left: 0 2021-05-30 15:23:40 [debug] Movement lock held by null 2021-05-30 15:23:40 [debug] HTTP is ready with "M122 b0" in state(s) 0 2021-05-30 15:23:40 [debug] Telnet is idle in state(s) 0 2021-05-30 15:23:40 [debug] File is doing "G1 X229.553 Y243.612 E0.18482" in state(s) 0 2021-05-30 15:23:40 [debug] USB is idle in state(s) 0 2021-05-30 15:23:40 [debug] Aux is idle in state(s) 0 2021-05-30 15:23:40 [debug] Trigger is idle in state(s) 0 2021-05-30 15:23:40 [debug] Queue is idle in state(s) 0 2021-05-30 15:23:40 [debug] LCD is idle in state(s) 0 2021-05-30 15:23:40 [debug] SBC is idle in state(s) 0 2021-05-30 15:23:40 [debug] Daemon is idle in state(s) 0 2021-05-30 15:23:40 [debug] Aux2 is idle in state(s) 0 2021-05-30 15:23:40 [debug] Autopause is idle in state(s) 0 2021-05-30 15:23:40 [debug] Code queue is empty. 2021-05-30 15:23:40 [debug] === CAN === Messages queued 36557, send timeouts 73, received 6137, lost 0, longest wait 21ms for reply type 6024, peak Tx sync delay 403, free buffers 49 (min 18) 2021-05-30 15:23:40 [debug] Last cancelled message type 51 dest 1 2021-05-30 15:23:40 [debug] === Network === 2021-05-30 15:23:40 [debug] Slowest loop: 13.47ms; fastest: 0.02ms 2021-05-30 15:23:40 [debug] Responder states: 2021-05-30 15:23:40 [debug] HTTP(0) 2021-05-30 15:23:40 [debug] HTTP(0) 2021-05-30 15:23:40 [debug] HTTP(0) 2021-05-30 15:23:40 [debug] HTTP(0) 2021-05-30 15:23:40 [debug] HTTP(0) 2021-05-30 15:23:40 [debug] HTTP(0) 2021-05-30 15:23:40 [debug] FTP(0) 2021-05-30 15:23:40 [debug] Telnet(0), 0 sessions 2021-05-30 15:23:40 [debug] Telnet(0), 0 sessions 2021-05-30 15:23:40 [debug] HTTP sessions: 3 of 8 2021-05-30 15:23:40 [debug] - Ethernet - State: active 2021-05-30 15:23:40 [debug] Error counts: 0 0 1 1 0 Socket states: 2021-05-30 15:23:40 [debug] 2 2021-05-30 15:23:40 [debug] 2 2021-05-30 15:23:40 [debug] 2 2021-05-30 15:23:40 [debug] 2 2021-05-30 15:23:40 [debug] 2 2021-05-30 15:23:40 [debug] 0 2021-05-30 15:23:40 [debug] 0 2021-05-30 15:23:40 [debug] 0 2021-05-30 15:23:46 [debug] Diagnostics for board 1: 2021-05-30 15:23:46 [debug] Duet EXP3HC firmware version 3.3beta3 (2021-04-21 20:41:46) Bootloader ID: SAME5x bootloader version 2.2 (2021-01-16b1) 2021-05-30 15:23:46 [debug] Never used RAM 158864, free system stack 0 words Tasks: Move(notifyWait,0.3%,100) HEAT(delaying,0.0%,63) CanAsync(notifyWait,0.0%,72) CanRecv(notifyWait,0.1%,81) CanClock(notifyWait,0.0%,74) TMC(notifyWait,27.0%,29) MAIN(running,70.9%,339) AIN(delaying,1.6%,263), total 100.0% Last reset 00:12:43 ago, cause: software 2021-05-30 15:23:46 [debug] Last software reset time unknown, reason: AssertionFailed, available RAM 159320, slot 1 Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004754 Task HEAT Freestk 142 bad marker 2021-05-30 15:23:46 [debug] Stack: 00000544 0002eb94 000261af 42000400 000223e3 2002f020 00000000 2002f038 2000151c 00000000 0001d681 0002dd80 0002de38 0002d43c 000b0000 2000159c 00000000 2002f020 00015609 00000000 000009c4 000009c4 a5a5a5a5 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024ff5 2021-05-30 15:23:46 [debug] Driver 0: position -263107, 320.0 steps/mm, standstill, reads 3677, writes 0 timeouts 0, SG min/max 0/1023, steps req 6987427 done 6987427 Driver 1: position -8180, 320.0 steps/mm, standstill, reads 3676, writes 0 timeouts 0, SG min/max 0/1023, steps req 6258446 done 6258446 Driver 2: position 0, 80.0 steps/mm, standstill, reads 3676, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0 2021-05-30 15:23:46 [debug] Moves scheduled 16876, completed 16876, in progress 0, hiccups 0, step errors 0, maxPrep 152, maxOverdue 28021, maxInc 9631, mcErrs 0, gcmErrs 0 Peak sync jitter 10, peak Rx sync delay 212, resyncs 0, no step interrupt scheduled VIN: 32.1V, V12: 12.1V MCU temperature: min 38.9C, current 40.6C, max 40.6C Ticks since heat task active 16, ADC conversions started 764148, completed 764148, timed out 0, errs 0 2021-05-30 15:23:46 [debug] Last sensors broadcast 0x00000000 found 0 25 ticks ago, loop time 0 CAN messages queued 1577, send timeouts 0, received 21844, lost 0, free buffers 36, min 36, error reg 0 dup 0, oos 0, bm 0, wbm 0 2021-05-30 15:23:49 [debug] Diagnostics for board 2: 2021-05-30 15:23:49 [debug] Duet EXP3HC firmware version 3.3beta3 (2021-04-21 20:41:46) Bootloader ID: not available 2021-05-30 15:23:49 [debug] Never used RAM 157912, free system stack 0 words Tasks: Move(notifyWait,0.2%,92) HEAT(delaying,0.0%,88) CanAsync(notifyWait,0.0%,72) CanRecv(notifyWait,0.1%,81) CanClock(notifyWait,0.0%,74) TMC(notifyWait,24.4%,29) MAIN(running,73.8%,301) AIN(delaying,1.5%,263), total 100.0% Last reset 00:12:47 ago, cause: software 2021-05-30 15:23:49 [debug] Last software reset at 2021-05-29 21:17, reason: AssertionFailed, available RAM 158184, slot 1 Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004764 Task HEAT Freestk 146 ok 2021-05-30 15:23:49 [debug] Stack: 00000544 0002eb10 000260ff 42000400 0002232f 00000000 00000020 2002f020 2000159c 00000003 0001d25b 00000000 2002f020 00000020 000157b1 00000000 00037aa0 00037aa0 41dac600 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024f45 a5a5a5a5 00000058 00000000 2002ee70 2021-05-30 15:23:49 [debug] Driver 0: position 617772, 830.0 steps/mm, standstill, reads 39999, writes 1 timeouts 0, SG min/max 0/1022, steps req 785488 done 785488 Driver 1: position 0, 830.0 steps/mm, standstill, reads 40000, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0 Driver 2: position 0, 830.0 steps/mm, standstill, reads 40000, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0 2021-05-30 15:23:49 [debug] Moves scheduled 16289, completed 16289, in progress 0, hiccups 0, step errors 0, maxPrep 55, maxOverdue 27618, maxInc 9647, mcErrs 0, gcmErrs 0 Peak sync jitter 12, peak Rx sync delay 182, resyncs 1, no step interrupt scheduled VIN: 24.1V, V12: 12.2V MCU temperature: min 40.4C, current 41.0C, max 41.4C Ticks since heat task active 100, ADC conversions started 767231, completed 767229, timed out 0, errs 0 2021-05-30 15:23:49 [debug] Last sensors broadcast 0x0000000e found 3 105 ticks ago, loop time 0 CAN messages queued 4692, send timeouts 0, received 19789, lost 0, free buffers 36, min 36, error reg 0 dup 0, oos 0, bm 0, wbm 0 2021-05-30 15:24:10 [info] G10 P0 S0 2021-05-30 15:27:48 [warn] Error: Failed to switch off remote heater 1: 2021-05-30 15:27:48 [warn] Error: Failed to switch off remote heater 2: 2021-05-30 15:27:48 [warn] Error: Failed to switch off remote heater 3: 2021-05-30 15:27:48 [debug] Done printing file 2021-05-30 15:27:48 [debug] Done printing file 2021-05-30 15:27:48 [warn] Cancelled printing file 0:/gcodes/ScrewMount_x400speed.gcode, print time was 0h 7m 2021-05-30 15:27:48 [info] Event logging stopped power up + 00:00:00 [info] Event logging started at level debug power up + 00:00:00 [info] Running: Duet 3 MB6HC v0.6 or 1.0: 3.3beta3 (2021-04-22 16:28:02) power up + 00:00:00 [warn] Warning: Heater 0 appears to be over-powered. If left on at full power, its temperature is predicted to reach 209C power up + 00:00:00 [warn] Warning: Heater 1 appears to be over-powered. If left on at full power, its temperature is predicted to reach 465C power up + 00:00:00 [info] G10 P0 X1.44 Y-0.73 Z-0.57 U0.00 power up + 00:00:00 [info] G10 P49 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P1 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P2 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P3 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P4 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P5 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P6 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P7 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P8 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P9 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] M568 P0 S0 R0 power up + 00:00:00 [info] M568 P1 S0 R0 power up + 00:00:00 [info] M568 P2 S0 R0 power up + 00:00:00 [debug] Done! power up + 00:00:00 [debug] RepRapFirmware for Duet 3 MB6HC is up and running. power up + 00:00:01 [warn] Ethernet running, IP address = 192.168.1.210 power up + 00:00:02 [warn] HTTP client 192.168.1.12 login succeeded 2021-05-30 15:27:51 [warn] Date and time set at power up + 00:00:02 2021-05-30 15:27:53 [warn] HTTP client 192.168.1.126 login succeeded 2021-05-30 15:27:54 [warn] HTTP client 192.168.1.166 login succeeded 2021-05-30 15:28:04 [warn] HTTP client 192.168.1.166 login succeeded 2021-05-30 15:28:04 [warn] HTTP client 192.168.1.126 login succeeded