2021-05-30 14:58:00 [debug] DDAs 60, DMs 125, GracePeriod 10 2021-05-30 15:03:45 [warn] Started printing file 0:/gcodes/ScrewMount_x400speed.gcode 2021-05-30 15:03:45 [debug] File 0:/gcodes/ScrewMount_x400speed.gcode selected for printing 2021-05-30 15:03:45 [info] G10 P0 R205 2021-05-30 15:03:45 [info] G10 P0 R0 S0 2021-05-30 15:03:45 [info] G10 P1 R0 S0 2021-05-30 15:03:45 [info] G10 P2 R0 S0 2021-05-30 15:03:45 [info] G10 P0 R175 S205 2021-05-30 15:04:29 [debug] 1 2021-05-30 15:04:29 [debug] Carriage coupling failed! 2021-05-30 15:04:54 [debug] 1 2021-05-30 15:04:54 [debug] Carriage coupling failed! 2021-05-30 15:05:20 [warn] Leadscrew adjustments made: -0.042 -0.056 -0.049, points used 3, (mean, deviation) before (-0.049, 0.005) after (-0.000, 0.000) 2021-05-30 15:05:20 [debug] Leadscrew adjustments made: -0.042 -0.056 -0.049, points used 3, (mean, deviation) before (-0.049, 0.005) after (-0.000, 0.000) 2021-05-30 15:05:20 [debug] Gantry deviation of 0.005mm obtained. 2021-05-30 15:05:24 [debug] === Diagnostics === 2021-05-30 15:05:24 [debug] RepRapFirmware for Duet 3 MB6HC version 3.3beta3 (2021-04-22 16:28:03) running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode) 2021-05-30 15:05:24 [debug] Board ID: 08DJM-956L2-G43S4-6JKDD-3SJ6L-TB62G 2021-05-30 15:05:24 [debug] Used output buffers: 2 of 40 (40 max) 2021-05-30 15:05:24 [debug] === RTOS === 2021-05-30 15:05:24 [debug] Static ram: 149960 2021-05-30 15:05:24 [debug] Dynamic ram: 94972 of which 0 recycled 2021-05-30 15:05:24 [debug] Never used RAM 106404, free system stack 98 words 2021-05-30 15:05:24 [debug] Tasks: 2021-05-30 15:05:24 [debug] NETWORK(ready,26.5%,194) 2021-05-30 15:05:24 [debug] ETHERNET(notifyWait,0.1%,120) 2021-05-30 15:05:24 [debug] HEAT(delaying,0.0%,275) 2021-05-30 15:05:24 [debug] Move(notifyWait,0.0%,26) 2021-05-30 15:05:24 [debug] CanReceiv(notifyWait,0.0%,773) 2021-05-30 15:05:24 [debug] CanSender(notifyWait,0.0%,359) 2021-05-30 15:05:24 [debug] CanClock(delaying,0.0%,341) 2021-05-30 15:05:24 [debug] TMC(notifyWait,8.0%,59) 2021-05-30 15:05:24 [debug] MAIN(running,65.3%,516) 2021-05-30 15:05:24 [debug] IDLE(ready,0.0%,19) 2021-05-30 15:05:24 [debug] , total 100.0% Owned mutexes: 2021-05-30 15:05:24 [debug] File(MAIN) 2021-05-30 15:05:24 [debug] === Platform === 2021-05-30 15:05:24 [debug] Last reset 02:53:40 ago, cause: software 2021-05-30 15:05:24 [debug] Last software reset at 2021-05-30 12:12, reason: User, GCodes spinning, available RAM 109564, slot 1 2021-05-30 15:05:24 [debug] Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0044a000 BFAR 0x00000000 SP 0x00000000 Task MAIN Freestk 0 n/a 2021-05-30 15:05:24 [debug] Error status: 0x04 2021-05-30 15:05:24 [debug] Aux0 errors 0,0,0 2021-05-30 15:05:24 [debug] Aux1 errors 0,0,0 2021-05-30 15:05:24 [debug] Step timer max interval 132 2021-05-30 15:05:24 [debug] MCU temperature: min 43.7, current 44.0, max 44.3 2021-05-30 15:05:24 [debug] Supply voltage: min 31.8, current 31.9, max 31.9, under voltage events: 0, over voltage events: 0, power good: yes 2021-05-30 15:05:24 [debug] 12V rail voltage: min 12.0, current 12.0, max 12.1, under voltage events: 0 2021-05-30 15:05:24 [debug] Heap OK, handles allocated/used 99/0, heap memory allocated/used/recyclable 2048/272/272, gc cycles 0 2021-05-30 15:05:24 [debug] Driver 0: position 320000, standstill, reads 33474, writes 2 timeouts 0, SG min/max 0/138 2021-05-30 15:05:24 [debug] Driver 1: position 0, standstill, reads 33469, writes 2 timeouts 0, SG min/max 0/412 2021-05-30 15:05:24 [debug] Driver 2: position 28800, standstill, reads 33462, writes 10 timeouts 0, SG min/max 0/158 2021-05-30 15:05:24 [debug] Driver 3: position 0, ok, reads 33474, writes 2 timeouts 0, SG min/max 0/610 2021-05-30 15:05:24 [debug] Driver 4: position 0, ok, reads 33474, writes 2 timeouts 0, SG min/max 0/827 2021-05-30 15:05:24 [debug] Driver 5: position 0, ok, reads 33471, writes 2 timeouts 0, SG min/max 0/641 2021-05-30 15:05:24 [debug] Date/time: 2021-05-30 15:05:24 [debug] 2021-05-30 15:05:24 2021-05-30 15:05:24 [debug] Slowest loop: 70.29ms; fastest: 0.05ms 2021-05-30 15:05:24 [debug] === Storage === Free file entries: 7 2021-05-30 15:05:24 [debug] SD card 0 detected, interface speed: 25.0MBytes/sec 2021-05-30 15:05:24 [debug] SD card longest read time 3.3ms, write time 3.6ms, max retries 0 2021-05-30 15:05:24 [debug] === Move === DMs created 125, maxWait 4372977ms, bed compensation in use: none, comp offset 0.000 2021-05-30 15:05:24 [debug] === MainDDARing === Scheduled moves 77, completed moves 76, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 2021-05-30 15:05:24 [debug] === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 2021-05-30 15:05:24 [debug] === Heat === Bed heaters = 2021-05-30 15:05:24 [debug] 0 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] , chamberHeaters = 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] -1 2021-05-30 15:05:24 [debug] Heater 0 is on, I-accum = 0.2 2021-05-30 15:05:24 [debug] === GCodes === 2021-05-30 15:05:24 [debug] Segments left: 0 2021-05-30 15:05:24 [debug] Movement lock held by File 2021-05-30 15:05:24 [debug] HTTP is idle in state(s) 0 2021-05-30 15:05:24 [debug] Telnet is idle in state(s) 0 2021-05-30 15:05:24 [debug] File is ready with "M122 B0 " in state(s) 0 15, running macro 2021-05-30 15:05:24 [debug] USB is idle in state(s) 0 2021-05-30 15:05:24 [debug] Aux is idle in state(s) 0 2021-05-30 15:05:24 [debug] Trigger is idle in state(s) 0 2021-05-30 15:05:24 [debug] Queue is idle in state(s) 0 2021-05-30 15:05:24 [debug] LCD is idle in state(s) 0 2021-05-30 15:05:24 [debug] SBC is idle in state(s) 0 2021-05-30 15:05:24 [debug] Daemon is idle in state(s) 0 2021-05-30 15:05:24 [debug] Aux2 is idle in state(s) 0 2021-05-30 15:05:24 [debug] Autopause is idle in state(s) 0 2021-05-30 15:05:24 [debug] Code queue is empty. 2021-05-30 15:05:24 [debug] === CAN === Messages queued 8692, send timeouts 0, received 15371, lost 0, longest wait 21ms for reply type 6024, peak Tx sync delay 549, free buffers 49 (min 47) 2021-05-30 15:05:24 [debug] === Network === 2021-05-30 15:05:24 [debug] Slowest loop: 85.63ms; fastest: 0.02ms 2021-05-30 15:05:24 [debug] Responder states: 2021-05-30 15:05:24 [debug] HTTP(0) 2021-05-30 15:05:24 [debug] HTTP(0) 2021-05-30 15:05:24 [debug] HTTP(0) 2021-05-30 15:05:24 [debug] HTTP(0) 2021-05-30 15:05:24 [debug] HTTP(0) 2021-05-30 15:05:24 [debug] HTTP(0) 2021-05-30 15:05:24 [debug] FTP(0) 2021-05-30 15:05:24 [debug] Telnet(0), 0 sessions 2021-05-30 15:05:24 [debug] Telnet(0), 0 sessions 2021-05-30 15:05:24 [debug] HTTP sessions: 3 of 8 2021-05-30 15:05:24 [debug] - Ethernet - State: active 2021-05-30 15:05:24 [debug] Error counts: 0 0 1 0 0 Socket states: 2021-05-30 15:05:24 [debug] 2 2021-05-30 15:05:24 [debug] 2 2021-05-30 15:05:24 [debug] 2 2021-05-30 15:05:24 [debug] 2 2021-05-30 15:05:24 [debug] 2 2021-05-30 15:05:24 [debug] 0 2021-05-30 15:05:24 [debug] 0 2021-05-30 15:05:24 [debug] 0 2021-05-30 15:05:24 [debug] Diagnostics for board 1: 2021-05-30 15:05:24 [debug] Duet EXP3HC firmware version 3.3beta3 (2021-04-21 20:41:46) Bootloader ID: SAME5x bootloader version 2.2 (2021-01-16b1) 2021-05-30 15:05:24 [debug] Never used RAM 158864, free system stack 0 words Tasks: Move(notifyWait,0.0%,100) HEAT(delaying,0.0%,75) CanAsync(notifyWait,0.0%,72) CanRecv(notifyWait,0.0%,81) CanClock(notifyWait,0.0%,74) TMC(notifyWait,23.8%,29) MAIN(running,74.8%,347) AIN(delaying,1.4%,263), total 100.0% Last reset 02:53:41 ago, cause: software 2021-05-30 15:05:24 [debug] Last software reset time unknown, reason: AssertionFailed, available RAM 159320, slot 1 Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004754 Task HEAT Freestk 142 bad marker 2021-05-30 15:05:24 [debug] Stack: 00000544 0002eb94 000261af 42000400 000223e3 2002f020 00000000 2002f038 2000151c 00000000 0001d681 0002dd80 0002de38 0002d43c 000b0000 2000159c 00000000 2002f020 00015609 00000000 000009c4 000009c4 a5a5a5a5 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024ff5 2021-05-30 15:05:24 [debug] Driver 0: position -192632, 320.0 steps/mm, standstill, reads 45474, writes 2 timeouts 0, SG min/max 0/123, steps req 2131840 done 2035540 Driver 1: position -1911, 320.0 steps/mm, standstill, reads 45474, writes 2 timeouts 0, SG min/max 0/643, steps req 1360000 done 1263700 Driver 2: position 0, 80.0 steps/mm, standstill, reads 45475, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0 2021-05-30 15:05:24 [debug] Moves scheduled 210408, completed 210408, in progress 0, hiccups 0, step errors 0, maxPrep 72, maxOverdue 2, maxInc 2, mcErrs 0, gcmErrs 0 Peak sync jitter 10, peak Rx sync delay 207, resyncs 1, no step interrupt scheduled VIN: 32.1V, V12: 12.1V MCU temperature: min 37.3C, current 40.2C, max 40.4C Ticks since heat task active 6, ADC conversions started 10422124, completed 10422122, timed out 0, errs 0 2021-05-30 15:05:24 [debug] Last sensors broadcast 0x00000000 found 0 11 ticks ago, loop time 0 CAN messages queued 3889, send timeouts 0, received 12418, lost 0, free buffers 36, min 36, error reg 0 dup 0, oos 0, bm 0, wbm 0 2021-05-30 15:05:24 [debug] Diagnostics for board 2: 2021-05-30 15:05:24 [debug] Duet EXP3HC firmware version 3.3beta3 (2021-04-21 20:41:46) Bootloader ID: not available 2021-05-30 15:05:24 [debug] Never used RAM 157912, free system stack 0 words Tasks: Move(notifyWait,0.0%,92) HEAT(delaying,0.0%,72) CanAsync(notifyWait,0.0%,72) CanRecv(notifyWait,0.0%,81) CanClock(notifyWait,0.0%,74) TMC(notifyWait,23.5%,29) MAIN(running,75.1%,301) AIN(delaying,1.3%,263), total 100.0% Last reset 02:53:42 ago, cause: software 2021-05-30 15:05:24 [debug] Last software reset at 2021-05-29 21:17, reason: AssertionFailed, available RAM 158184, slot 1 Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004764 Task HEAT Freestk 146 ok 2021-05-30 15:05:24 [debug] Stack: 00000544 0002eb10 000260ff 42000400 0002232f 00000000 00000020 2002f020 2000159c 00000003 0001d25b 00000000 2002f020 00000020 000157b1 00000000 00037aa0 00037aa0 41dac600 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024f45 a5a5a5a5 00000058 00000000 2002ee70 2021-05-30 15:05:24 [debug] Driver 0: position 4611143, 830.0 steps/mm, standstill, reads 17039, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0 Driver 1: position 0, 830.0 steps/mm, standstill, reads 17037, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0 Driver 2: position 0, 830.0 steps/mm, standstill, reads 17038, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0 2021-05-30 15:05:24 [debug] Moves scheduled 204026, completed 204026, in progress 0, hiccups 0, step errors 0, maxPrep 0, maxOverdue 0, maxInc 0, mcErrs 0, gcmErrs 0 Peak sync jitter 13, peak Rx sync delay 179, resyncs 0, no step interrupt scheduled VIN: 24.2V, V12: 12.2V MCU temperature: min 38.7C, current 40.8C, max 41.4C Ticks since heat task active 118, ADC conversions started 10422386, completed 10422386, timed out 0, errs 0 2021-05-30 15:05:24 [debug] Last sensors broadcast 0x0000000e found 3 126 ticks ago, loop time 0 CAN messages queued 11414, send timeouts 0, received 8563, lost 0, free buffers 36, min 36, error reg 0 dup 0, oos 0, bm 0, wbm 0 2021-05-30 15:05:26 [debug] T:175.0 /205.0 T0:175.0 /205.0 T1:-273.1 /0.0 T2:27.6 /0.0 B:51.6 /50.0 2021-05-30 15:05:27 [debug] T:175.3 /205.0 T0:175.3 /205.0 T1:-273.1 /0.0 T2:27.6 /0.0 B:51.6 /50.0 2021-05-30 15:05:28 [debug] T:176.4 /205.0 T0:176.4 /205.0 T1:-273.1 /0.0 T2:27.6 /0.0 B:51.5 /50.0 2021-05-30 15:05:29 [debug] T:178.0 /205.0 T0:178.0 /205.0 T1:-273.1 /0.0 T2:27.6 /0.0 B:51.5 /50.0 2021-05-30 15:05:30 [debug] T:180.1 /205.0 T0:180.1 /205.0 T1:-273.1 /0.0 T2:27.6 /0.0 B:51.5 /50.0 2021-05-30 15:05:31 [debug] T:182.5 /205.0 T0:182.5 /205.0 T1:-273.1 /0.0 T2:27.6 /0.0 B:51.5 /50.0 2021-05-30 15:05:32 [debug] T:185.1 /205.0 T0:185.1 /205.0 T1:-273.1 /0.0 T2:27.6 /0.0 B:51.5 /50.0 2021-05-30 15:05:33 [debug] T:187.8 /205.0 T0:187.8 /205.0 T1:-273.1 /0.0 T2:27.6 /0.0 B:51.5 /50.0 2021-05-30 15:05:34 [debug] T:190.5 /205.0 T0:190.5 /205.0 T1:-273.1 /0.0 T2:27.6 /0.0 B:51.5 /50.0 2021-05-30 15:05:35 [debug] T:193.3 /205.0 T0:193.3 /205.0 T1:-273.1 /0.0 T2:27.6 /0.0 B:51.5 /50.0 2021-05-30 15:05:36 [debug] T:196.1 /205.0 T0:196.1 /205.0 T1:-273.1 /0.0 T2:27.6 /0.0 B:51.5 /50.0 2021-05-30 15:05:37 [debug] T:198.6 /205.0 T0:198.6 /205.0 T1:-273.1 /0.0 T2:27.5 /0.0 B:51.5 /50.0 2021-05-30 15:05:38 [debug] X-Max Deactivated 2021-05-30 15:09:59 [warn] Resume state saved 2021-05-30 15:10:00 [warn] Printing paused at X259.7 Y264.6 Z0.9 U101.1 2021-05-30 15:10:00 [debug] Printing paused at X259.7 Y264.6 Z0.9 U101.1 2021-05-30 15:10:12 [warn] Warning: Discarded msg src=2 typ=4510 RID=588 exp 589 2021-05-30 15:10:12 [debug] Diagnostics for board 2: 2021-05-30 15:10:12 [debug] Duet EXP3HC firmware version 3.3beta3 (2021-04-21 20:41:46) Bootloader ID: not available 2021-05-30 15:10:12 [debug] Never used RAM 157912, free system stack 0 words Tasks: Move(notifyWait,0.1%,92) HEAT(delaying,0.0%,72) CanAsync(notifyWait,0.0%,72) CanRecv(notifyWait,0.1%,81) CanClock(notifyWait,0.0%,74) TMC(notifyWait,24.4%,29) MAIN(running,73.8%,301) AIN(delaying,1.5%,263), total 100.0% Last reset 02:58:30 ago, cause: software 2021-05-30 15:10:12 [debug] Last software reset at 2021-05-29 21:17, reason: AssertionFailed, available RAM 158184, slot 1 Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004764 Task HEAT Freestk 146 ok 2021-05-30 15:10:12 [debug] Stack: 00000544 0002eb10 000260ff 42000400 0002232f 00000000 00000020 2002f020 2000159c 00000003 0001d25b 00000000 2002f020 00000020 000157b1 00000000 00037aa0 00037aa0 41dac600 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024f45 a5a5a5a5 00000058 00000000 2002ee70 2021-05-30 15:10:12 [debug] Driver 0: position 5022088, 830.0 steps/mm, standstill, reads 50836, writes 2 timeouts 0, SG min/max 0/230, steps req 475263 done 475263 Driver 1: position 0, 830.0 steps/mm, standstill, reads 50838, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0 Driver 2: position 0, 830.0 steps/mm, standstill, reads 50837, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0 2021-05-30 15:10:12 [debug] Moves scheduled 212149, completed 212149, in progress 0, hiccups 0, step errors 0, maxPrep 53, maxOverdue 20240, maxInc 6813, mcErrs 0, gcmErrs 0 Peak sync jitter 12, peak Rx sync delay 180, resyncs 0, no step interrupt scheduled VIN: 24.2V, V12: 12.2V MCU temperature: min 38.7C, current 41.0C, max 41.4C Ticks since heat task active 117, ADC conversions started 10710386, completed 10710385, timed out 0, errs 0 2021-05-30 15:10:12 [debug] Last sensors broadcast 0x0000000e found 3 122 ticks ago, loop time 0 CAN messages queued 3497, send timeouts 0, received 10727, lost 0, free buffers 36, min 36, error reg 0 dup 0, oos 0, bm 0, wbm 0 2021-05-30 15:10:34 [debug] Diagnostics for board 1: 2021-05-30 15:10:34 [debug] Duet EXP3HC firmware version 3.3beta3 (2021-04-21 20:41:46) Bootloader ID: SAME5x bootloader version 2.2 (2021-01-16b1) 2021-05-30 15:10:34 [debug] Never used RAM 158864, free system stack 0 words Tasks: Move(notifyWait,0.2%,100) HEAT(delaying,0.0%,75) CanAsync(notifyWait,0.0%,72) CanRecv(notifyWait,0.1%,81) CanClock(notifyWait,0.0%,74) TMC(notifyWait,26.5%,29) MAIN(running,71.6%,347) AIN(delaying,1.6%,263), total 100.0% Last reset 02:58:51 ago, cause: software 2021-05-30 15:10:34 [debug] Last software reset time unknown, reason: AssertionFailed, available RAM 159320, slot 1 Software reset code 0x0120 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x20004754 Task HEAT Freestk 142 bad marker 2021-05-30 15:10:34 [debug] Stack: 00000544 0002eb94 000261af 42000400 000223e3 2002f020 00000000 2002f038 2000151c 00000000 0001d681 0002dd80 0002de38 0002d43c 000b0000 2000159c 00000000 2002f020 00015609 00000000 000009c4 000009c4 a5a5a5a5 a5a5a5a5 a5a5a5a5 a5a5a5a5 00024ff5 2021-05-30 15:10:34 [debug] Driver 0: position -345075, 320.0 steps/mm, standstill, reads 34, writes 0 timeouts 0, SG min/max 0/1023, steps req 4588789 done 4588789 Driver 1: position -4163, 320.0 steps/mm, standstill, reads 34, writes 0 timeouts 0, SG min/max 0/1023, steps req 3951584 done 3951584 Driver 2: position 0, 80.0 steps/mm, standstill, reads 34, writes 0 timeouts 0, SG min/max not available, steps req 0 done 0 2021-05-30 15:10:34 [debug] Moves scheduled 218844, completed 218844, in progress 0, hiccups 0, step errors 0, maxPrep 146, maxOverdue 20654, maxInc 6809, mcErrs 0, gcmErrs 0 Peak sync jitter 10, peak Rx sync delay 213, resyncs 0, no step interrupt scheduled VIN: 32.1V, V12: 12.1V MCU temperature: min 37.3C, current 40.2C, max 40.6C Ticks since heat task active 195, ADC conversions started 10732062, completed 10732062, timed out 0, errs 0 2021-05-30 15:10:34 [debug] Last sensors broadcast 0x00000000 found 0 201 ticks ago, loop time 0 CAN messages queued 1278, send timeouts 0, received 12475, lost 0, free buffers 36, min 36, error reg 0 dup 0, oos 0, bm 0, wbm 0 2021-05-30 15:10:37 [debug] === Diagnostics === 2021-05-30 15:10:37 [debug] RepRapFirmware for Duet 3 MB6HC version 3.3beta3 (2021-04-22 16:28:03) running on Duet 3 MB6HC v0.6 or 1.0 (standalone mode) 2021-05-30 15:10:37 [debug] Board ID: 08DJM-956L2-G43S4-6JKDD-3SJ6L-TB62G 2021-05-30 15:10:37 [debug] Used output buffers: 1 of 40 (40 max) 2021-05-30 15:10:37 [debug] === RTOS === 2021-05-30 15:10:37 [debug] Static ram: 149960 2021-05-30 15:10:37 [debug] Dynamic ram: 94972 of which 0 recycled 2021-05-30 15:10:37 [debug] Never used RAM 106404, free system stack 98 words 2021-05-30 15:10:37 [debug] Tasks: 2021-05-30 15:10:37 [debug] NETWORK(ready,24.9%,194) 2021-05-30 15:10:37 [debug] ETHERNET(notifyWait,0.3%,120) 2021-05-30 15:10:37 [debug] HEAT(delaying,0.0%,275) 2021-05-30 15:10:37 [debug] Move(notifyWait,0.4%,26) 2021-05-30 15:10:37 [debug] CanReceiv(notifyWait,0.0%,773) 2021-05-30 15:10:37 [debug] CanSender(notifyWait,0.0%,359) 2021-05-30 15:10:37 [debug] CanClock(delaying,0.0%,341) 2021-05-30 15:10:37 [debug] TMC(notifyWait,9.0%,59) 2021-05-30 15:10:37 [debug] MAIN(running,65.2%,516) 2021-05-30 15:10:37 [debug] IDLE(ready,0.0%,19) 2021-05-30 15:10:37 [debug] , total 100.0% Owned mutexes: 2021-05-30 15:10:37 [debug] HTTP(MAIN) 2021-05-30 15:10:37 [debug] === Platform === 2021-05-30 15:10:37 [debug] Last reset 02:58:53 ago, cause: software 2021-05-30 15:10:37 [debug] Last software reset at 2021-05-30 12:12, reason: User, GCodes spinning, available RAM 109564, slot 1 2021-05-30 15:10:37 [debug] Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0044a000 BFAR 0x00000000 SP 0x00000000 Task MAIN Freestk 0 n/a 2021-05-30 15:10:37 [debug] Error status: 0x04 2021-05-30 15:10:37 [debug] Aux0 errors 0,0,0 2021-05-30 15:10:37 [debug] Aux1 errors 0,0,0 2021-05-30 15:10:37 [debug] Step timer max interval 239 2021-05-30 15:10:37 [debug] MCU temperature: min 43.7, current 44.1, max 44.3 2021-05-30 15:10:37 [debug] Supply voltage: min 31.8, current 31.8, max 31.9, under voltage events: 0, over voltage events: 0, power good: yes 2021-05-30 15:10:37 [debug] 12V rail voltage: min 12.0, current 12.0, max 12.1, under voltage events: 0 2021-05-30 15:10:37 [debug] Heap OK, handles allocated/used 99/1, heap memory allocated/used/recyclable 2048/322/292, gc cycles 0 2021-05-30 15:10:37 [debug] Driver 0: position 167557, standstill, reads 9294, writes 0 timeouts 0, SG min/max 0/1023 2021-05-30 15:10:37 [debug] Driver 1: position -2252, standstill, reads 9294, writes 0 timeouts 0, SG min/max 0/1023 2021-05-30 15:10:37 [debug] Driver 2: position 21024, standstill, reads 9290, writes 4 timeouts 0, SG min/max 0/139 2021-05-30 15:10:37 [debug] Driver 3: position 291, standstill, reads 9289, writes 0 timeouts 0, SG min/max 0/147 2021-05-30 15:10:37 [debug] Driver 4: position 0, standstill, reads 9293, writes 0 timeouts 0, SG min/max 0/520 2021-05-30 15:10:37 [debug] Driver 5: position 0, standstill, reads 9293, writes 0 timeouts 0, SG min/max 0/103 2021-05-30 15:10:37 [debug] Date/time: 2021-05-30 15:10:37 [debug] 2021-05-30 15:10:37 2021-05-30 15:10:37 [debug] Slowest loop: 60.34ms; fastest: 0.03ms 2021-05-30 15:10:37 [debug] === Storage === Free file entries: 8 2021-05-30 15:10:37 [debug] SD card 0 detected, interface speed: 25.0MBytes/sec 2021-05-30 15:10:37 [debug] SD card longest read time 3.3ms, write time 3.6ms, max retries 0 2021-05-30 15:10:37 [debug] === Move === DMs created 125, maxWait 11743ms, bed compensation in use: none, comp offset 0.000 2021-05-30 15:10:37 [debug] === MainDDARing === Scheduled moves 8566, completed moves 8566, hiccups 0, stepErrors 0, LaErrors 0, Underruns [234, 2, 0], CDDA state -1 2021-05-30 15:10:37 [debug] === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 2021-05-30 15:10:37 [debug] === Heat === Bed heaters = 2021-05-30 15:10:37 [debug] 0 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] , chamberHeaters = 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] -1 2021-05-30 15:10:37 [debug] Heater 0 is on, I-accum = 0.1 2021-05-30 15:10:37 [debug] Heater 1 is on, I-accum = 0.0 2021-05-30 15:10:37 [debug] === GCodes === 2021-05-30 15:10:37 [debug] Segments left: 0 2021-05-30 15:10:37 [debug] Movement lock held by null 2021-05-30 15:10:37 [debug] HTTP is ready with "M122 b0" in state(s) 0 2021-05-30 15:10:37 [debug] Telnet is idle in state(s) 0 2021-05-30 15:10:37 [debug] File is doing "G1 X260.391 Y264.596 E0.01933" in state(s) 0 2021-05-30 15:10:37 [debug] USB is idle in state(s) 0 2021-05-30 15:10:37 [debug] Aux is idle in state(s) 0 2021-05-30 15:10:37 [debug] Trigger is idle in state(s) 0 2021-05-30 15:10:37 [debug] Queue is idle in state(s) 0 2021-05-30 15:10:37 [debug] LCD is idle in state(s) 0 2021-05-30 15:10:37 [debug] SBC is idle in state(s) 0 2021-05-30 15:10:37 [debug] Daemon is idle in state(s) 0 2021-05-30 15:10:37 [debug] Aux2 is idle in state(s) 0 2021-05-30 15:10:37 [debug] Autopause is idle in state(s) 0 2021-05-30 15:10:37 [debug] Code queue is empty. 2021-05-30 15:10:37 [debug] === CAN === Messages queued 19414, send timeouts 28, received 5163, lost 0, longest wait 21ms for reply type 6024, peak Tx sync delay 549, free buffers 49 (min 18) 2021-05-30 15:10:37 [debug] Last cancelled message type 51 dest 1 2021-05-30 15:10:37 [debug] === Network === 2021-05-30 15:10:37 [debug] Slowest loop: 13.44ms; fastest: 0.02ms 2021-05-30 15:10:37 [debug] Responder states: 2021-05-30 15:10:37 [debug] HTTP(0) 2021-05-30 15:10:37 [debug] HTTP(0) 2021-05-30 15:10:37 [debug] HTTP(0) 2021-05-30 15:10:37 [debug] HTTP(0) 2021-05-30 15:10:37 [debug] HTTP(0) 2021-05-30 15:10:37 [debug] HTTP(0) 2021-05-30 15:10:37 [debug] FTP(0) 2021-05-30 15:10:37 [debug] Telnet(0), 0 sessions 2021-05-30 15:10:37 [debug] Telnet(0), 0 sessions 2021-05-30 15:10:37 [debug] HTTP sessions: 3 of 8 2021-05-30 15:10:37 [debug] - Ethernet - State: active 2021-05-30 15:10:37 [debug] Error counts: 0 0 1 0 0 Socket states: 2021-05-30 15:10:37 [debug] 2 2021-05-30 15:10:37 [debug] 2 2021-05-30 15:10:37 [debug] 2 2021-05-30 15:10:37 [debug] 2 2021-05-30 15:10:37 [debug] 2 2021-05-30 15:10:37 [debug] 0 2021-05-30 15:10:37 [debug] 0 2021-05-30 15:10:37 [debug] 0 2021-05-30 15:11:00 [warn] Error: Failed to switch off remote heater 1: 2021-05-30 15:11:00 [warn] Error: Failed to switch off remote heater 2: 2021-05-30 15:11:00 [warn] Error: Failed to switch off remote heater 3: 2021-05-30 15:11:00 [debug] Done printing file 2021-05-30 15:11:00 [debug] Done printing file 2021-05-30 15:11:00 [warn] Cancelled printing file 0:/gcodes/ScrewMount_x400speed.gcode, print time was 0h 6m 2021-05-30 15:11:00 [info] Event logging stopped power up + 00:00:00 [info] Event logging started at level debug power up + 00:00:00 [info] Running: Duet 3 MB6HC v0.6 or 1.0: 3.3beta3 (2021-04-22 16:28:02) power up + 00:00:00 [warn] Warning: Heater 0 appears to be over-powered. If left on at full power, its temperature is predicted to reach 209C power up + 00:00:00 [warn] Warning: Heater 1 appears to be over-powered. If left on at full power, its temperature is predicted to reach 465C power up + 00:00:00 [info] G10 P0 X1.44 Y-0.73 Z-0.57 U0.00 power up + 00:00:00 [info] G10 P49 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P1 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P2 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P3 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P4 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P5 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P6 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P7 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P8 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] G10 L2 P9 X0.00 Y0.00 Z0.00 U0.00 power up + 00:00:00 [info] M568 P0 S0 R0 power up + 00:00:00 [info] M568 P1 S0 R0 power up + 00:00:00 [info] M568 P2 S0 R0 power up + 00:00:00 [debug] Done! power up + 00:00:00 [debug] RepRapFirmware for Duet 3 MB6HC is up and running. power up + 00:00:01 [warn] Ethernet running, IP address = 192.168.1.210 power up + 00:00:02 [warn] HTTP client 192.168.1.12 login succeeded 2021-05-30 15:11:05 [warn] Date and time set at power up + 00:00:02 2021-05-30 15:11:07 [warn] HTTP client 192.168.1.166 login succeeded 2021-05-30 15:11:08 [warn] HTTP client 192.168.1.126 login succeeded 2021-05-30 15:15:06 [debug] DDAs 60, DMs 125, GracePeriod 10