6/16/2021, 9:12:13 PM M122 === Diagnostics === RepRapFirmware for Duet 3 MB6HC version 3.3 (2021-06-15 21:45:47) running on Duet 3 MB6HC v1.01 or later (standalone mode) Board ID: 08DJM-956L2-G43S8-6J1F6-3S46R-KU2YD Used output buffers: 1 of 40 (11 max) === RTOS === Static ram: 150904 Dynamic ram: 92796 of which 0 recycled Never used RAM 110492, free system stack 202 words Tasks: NETWORK(ready,26.9%,252) ETHERNET(notifyWait,0.0%,117) HEAT(notifyWait,0.0%,325) Move(notifyWait,0.0%,352) CanReceiv(notifyWait,0.0%,944) CanSender(notifyWait,0.0%,374) CanClock(delaying,0.0%,333) TMC(notifyWait,7.8%,93) MAIN(running,65.2%,1114) IDLE(ready,0.0%,29), total 100.0% Owned mutexes: === Platform === Last reset 00:13:45 ago, cause: software Last software reset at 2021-06-16 20:58, reason: MemoryProtectionFault mmarValid daccViol, GCodes spinning, available RAM 110492, slot 2 Software reset code 0x4163 HFSR 0x00000000 CFSR 0x00000082 ICSR 0x0044a804 BFAR 0x000100b8 SP 0x2041b2e8 Task MAIN Freestk 1753 ok Stack: 00000000 00000001 20418194 00010000 00000000 0047a51f 004582ce 010f0000 a5a5a5a5 00457d27 10000000 e000e000 00000000 0040fe09 0040fdce 810f0000 40edf4e2 410d30e2 00000000 42200000 bcc985f0 20429cc0 20429cc0 00000000 20424018 0045814b 3c23d70a Error status: 0x00 Aux0 errors 0,0,0 Step timer max interval 144 MCU temperature: min 37.8, current 37.9, max 43.4 Supply voltage: min 23.8, current 23.8, max 23.9, under voltage events: 0, over voltage events: 0, power good: yes 12V rail voltage: min 12.0, current 12.1, max 12.1, under voltage events: 0 Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0 Driver 0: position 0, standstill, reads 8157, writes 14 timeouts 0, SG min/max 0/0 Driver 1: position 0, standstill, reads 8157, writes 14 timeouts 0, SG min/max 0/0 Driver 2: position 0, standstill, reads 8158, writes 14 timeouts 0, SG min/max 0/0 Driver 3: position 0, standstill, reads 8158, writes 14 timeouts 0, SG min/max 0/0 Driver 4: position 0, standstill, reads 8158, writes 14 timeouts 0, SG min/max 0/0 Driver 5: position 0, standstill, reads 8161, writes 11 timeouts 0, SG min/max 0/0 Date/time: 2021-06-16 21:12:11 Slowest loop: 2.32ms; fastest: 0.05ms === Storage === Free file entries: 10 SD card 0 detected, interface speed: 25.0MBytes/sec SD card longest read time 0.5ms, write time 0.0ms, max retries 0 === Move === DMs created 125, maxWait 0ms, bed compensation in use: none, comp offset 0.000 === MainDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === Heat === Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1 === GCodes === Segments left: 0 Movement lock held by null HTTP is idle in state(s) 0 Telnet is idle in state(s) 0 File is idle in state(s) 0 USB is idle in state(s) 0 Aux is idle in state(s) 0 Trigger is idle in state(s) 0 Queue is idle in state(s) 0 LCD is idle in state(s) 0 SBC is idle in state(s) 0 Daemon is idle in state(s) 0 Aux2 is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty. === Filament sensors === Extruder 0: pos 4.19, errs: frame 0 parity 0 ovrun 0 pol 0 ovdue 0 === CAN === Messages queued 7432, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 49 (min 49), ts 4130/0/0 Tx timeouts 0,0,4129,0,0,3301 last cancelled message type 30 dest 127 === Network === Slowest loop: 2.08ms; fastest: 0.02ms Responder states: HTTP(1) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions HTTP sessions: 1 of 8 - Ethernet - State: active Error counts: 0 0 0 0 0 Socket states: 3 5 2 2 2 0 0 0