[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.63-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gc c-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1457 SMP Tue Sep 28 11:26:14 BST 2021 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] random: fast init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, s ize 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id share d-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] On node 0 totalpages: 491520 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 294912 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920 [ 0.000000] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 489792 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835 .enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1024 bcm2708_ fb.fbheight=600 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:38:1B:41 vc_mem.me m_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=f5077efe-02 rootfstype=ext4 elevator=deadline fsck.repair=yes lsm= apparmor rootwait plymouth.ignore-serial-consoles [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, li near) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000025a00000-0x0000000029a0000 0] (64MB) [ 0.000000] Memory: 1797248K/1966080K available (10240K kernel code, 1364K rw data, 3192K rodata, 2048K init, 891K bss, 103296K reserved, 65536K cma-reserved, 1179648K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 34317 entries in 68 pages [ 0.000000] ftrace: allocated 68 pages with 2 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c wit h crng_init=1 [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2 147483647500ns [ 0.000034] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_ idle_ns: 1911260446275 ns [ 0.000098] bcm2835: system timer (irq = 25) [ 0.000745] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000767] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000789] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 43980 46511102ns [ 0.000807] Switching to timer-based delay loop, resolution 18ns [ 0.001068] Console: colour dummy device 80x30 [ 0.001839] printk: console [tty1] enabled [ 0.001905] Calibrating delay loop (skipped), value calculated using timer fr equency.. 108.00 BogoMIPS (lpj=540000) [ 0.001959] pid_max: default: 32768 minimum: 301 [ 0.002139] LSM: Security Framework initializing [ 0.002263] AppArmor: AppArmor initialized [ 0.002477] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linea r) [ 0.002523] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003991] cgroup: Disabling memory control group subsystem [ 0.004243] CPU: Testing write buffer coherency: ok [ 0.004728] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005996] Setting up static identity map for 0x200000 - 0x20003c [ 0.006215] rcu: Hierarchical SRCU implementation. [ 0.007163] smp: Bringing up secondary CPUs ... [ 0.008428] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009814] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011276] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.011434] smp: Brought up 1 node, 4 CPUs [ 0.011483] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.011513] CPU: All CPU(s) started in HYP mode. [ 0.011540] CPU: Virtualization extensions available. [ 0.012390] devtmpfs: initialized [ 0.026783] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.027031] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.027084] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.028984] pinctrl core: initialized pinctrl subsystem [ 0.030128] NET: Registered protocol family 16 [ 0.034473] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.035243] audit: initializing netlink subsys (disabled) [ 0.035539] audit: type=2000 audit(0.030:1): state=initialized audit_enabled= 0 res=1 [ 0.036113] thermal_sys: Registered thermal governor 'step_wise' [ 0.036901] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.036955] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.037372] Serial: AMBA PL011 UART driver [ 0.069097] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.080876] raspberrypi-firmware soc:firmware: Attached to firmware from 2021 -09-28T11:28:26, variant start_x [ 0.090889] raspberrypi-firmware soc:firmware: Firmware hash is 778b6a4f3c7d8 d48bb63c02c47bcfbac79417bea [ 0.132061] Kprobes globally optimized [ 0.137193] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.141409] vgaarb: loaded [ 0.141873] SCSI subsystem initialized [ 0.142118] usbcore: registered new interface driver usbfs [ 0.142196] usbcore: registered new interface driver hub [ 0.142283] usbcore: registered new device driver usb [ 0.142642] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.144661] clocksource: Switched to clocksource arch_sys_counter [ 1.102629] VFS: Disk quotas dquot_6.6.0 [ 1.102747] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.102926] FS-Cache: Loaded [ 1.103149] CacheFiles: Loaded [ 1.103953] AppArmor: AppArmor Filesystem Enabled [ 1.114347] NET: Registered protocol family 2 [ 1.114621] IP idents hash table entries: 16384 (order: 5, 131072 bytes, line ar) [ 1.116224] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.116389] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.116476] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.116563] TCP: Hash tables configured (established 8192 bind 8192) [ 1.116761] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.116814] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.117084] NET: Registered protocol family 1 [ 1.117881] RPC: Registered named UNIX socket transport module. [ 1.117914] RPC: Registered udp transport module. [ 1.117943] RPC: Registered tcp transport module. [ 1.117970] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.118008] PCI: CLS 0 bytes, default 64 [ 1.121497] Initialise system trusted keyrings [ 1.121762] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 1.130446] zbud: loaded [ 1.132222] FS-Cache: Netfs 'nfs' registered for caching [ 1.133033] NFS: Registering the id_resolver key type [ 1.133110] Key type id_resolver registered [ 1.133139] Key type id_legacy registered [ 1.133293] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.133327] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering ... [ 1.134391] Key type asymmetric registered [ 1.134424] Asymmetric key parser 'x509' registered [ 1.134627] bounce: pool size: 64 pages [ 1.134732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 49) [ 1.134975] io scheduler mq-deadline registered [ 1.135006] io scheduler kyber registered [ 1.139457] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.139511] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500 000, using [bus 00-ff] [ 1.139612] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0 x00c0000000 [ 1.139722] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0 x0400000000 [ 1.196767] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.197183] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.197221] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.197257] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.197369] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.197630] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.201104] PCI: bus0: Fast back to back transfers disabled [ 1.201459] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.201603] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.202056] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.205531] PCI: bus1: Fast back to back transfers disabled [ 1.205621] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.205663] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64 bit] [ 1.205766] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.205806] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.206251] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.206483] pcieport 0000:00:00.0: PME: Signaling with IRQ 61 [ 1.207438] bcm2708_fb soc:fb: FB found 1 display(s) [ 1.221246] Console: switching to colour frame buffer device 128x37 [ 1.224743] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 102 4x600 [ 1.232803] iproc-rng200 fe104000.rng: hwrng registered [ 1.234457] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000 000(1024 MiB) [ 1.236789] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe2 00000 [ 1.250717] brd: module loaded [ 1.264610] loop: module loaded [ 1.267931] Loading iSCSI transport class v2.0-870. [ 1.272519] libphy: Fixed MDIO Bus: probed [ 1.275605] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.294705] libphy: bcmgenet MII bus: probed [ 1.384806] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.387335] usbcore: registered new interface driver r8152 [ 1.388713] usbcore: registered new interface driver lan78xx [ 1.390050] usbcore: registered new interface driver smsc95xx [ 1.439221] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.440508] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 1 [ 1.444481] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 qu irks 0x0000060000000890 [ 1.447149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.10 [ 1.448476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.449787] usb usb1: Product: xHCI Host Controller [ 1.451086] usb usb1: Manufacturer: Linux 5.10.63-v7l+ xhci-hcd [ 1.452392] usb usb1: SerialNumber: 0000:01:00.0 [ 1.454432] hub 1-0:1.0: USB hub found [ 1.455818] hub 1-0:1.0: 1 port detected [ 1.457754] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.459032] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 2 [ 1.460316] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.462035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 5.10 [ 1.463337] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.464670] usb usb2: Product: xHCI Host Controller [ 1.465960] usb usb2: Manufacturer: Linux 5.10.63-v7l+ xhci-hcd [ 1.467241] usb usb2: SerialNumber: 0000:01:00.0 [ 1.469207] hub 2-0:1.0: USB hub found [ 1.470526] hub 2-0:1.0: 4 ports detected [ 1.473463] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.474985] dwc_otg: FIQ enabled [ 1.475000] dwc_otg: NAK holdoff enabled [ 1.475014] dwc_otg: FIQ split-transaction FSM enabled [ 1.475033] Module dwc_common_port init [ 1.475487] usbcore: registered new interface driver uas [ 1.476763] usbcore: registered new interface driver usb-storage [ 1.478128] mousedev: PS/2 mouse device common for all mice [ 1.480940] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.485772] sdhci: Secure Digital Host Controller Interface driver [ 1.486978] sdhci: Copyright(c) Pierre Ossman [ 1.488864] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.490625] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.496068] ledtrig-cpu: registered to indicate activity on CPUs [ 1.497645] hid: raw HID events driver (C) Jiri Kosina [ 1.499078] usbcore: registered new interface driver usbhid [ 1.500330] usbhid: USB HID core driver [ 1.507544] Initializing XFRM netlink socket [ 1.508825] NET: Registered protocol family 17 [ 1.510130] Key type dns_resolver registered [ 1.511765] Registering SWP/SWPB emulation handler [ 1.513241] registered taskstats version 1 [ 1.514420] Loading compiled-in X.509 certificates [ 1.516442] Key type ._fscrypt registered [ 1.517618] Key type .fscrypt registered [ 1.518783] Key type fscrypt-provisioning registered [ 1.520035] AppArmor: AppArmor sha1 policy hashing enabled [ 1.532606] uart-pl011 fe201000.serial: there is not valid maps for state def ault [ 1.534119] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.535405] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [ 1.543454] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains drive r [ 1.545893] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.547126] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.578989] of_cfs_init [ 1.580487] of_cfs_init: OK [ 1.597002] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.599928] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.602809] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.607112] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.609963] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.617944] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.620677] Waiting for root device PARTUUID=f5077efe-02... [ 1.680902] mmc1: new high speed SDIO card at address 0001 [ 1.722452] mmc0: new ultra high speed DDR50 SDHC card at address e624 [ 1.724490] mmcblk0: mmc0:e624 SB16G 14.8 GiB [ 1.730543] mmcblk0: p1 p2 [ 1.742180] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesyst em [ 1.743340] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 1.744727] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.927330] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcd Device= 4.21 [ 1.928544] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.929731] usb 1-1: Product: USB2.0 Hub [ 1.932888] hub 1-1:1.0: USB hub found [ 1.934343] hub 1-1:1.0: 4 ports detected [ 2.254702] usb 1-1.1: new full-speed USB device number 3 using xhci_hcd [ 2.391794] usb 1-1.1: New USB device found, idVendor=0484, idProduct=5750, b cdDevice= 2.00 [ 2.393037] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 2.394278] usb 1-1.1: Product: 7H Custom Human interface [ 2.395539] usb 1-1.1: Manufacturer: STMicroelectronics [ 2.396749] usb 1-1.1: SerialNumber: 677F6EDE0137 [ 2.417564] input: STMicroelectronics 7H Custom Human interface Touchscreen a s /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/ 1-1/1-1.1/1-1.1:1.0/0003:0484:5750.0001/input/input0 [ 2.420827] hid-generic 0003:0484:5750.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [STMicroelectronics 7H Custom Human interface] on usb-0000:01:00.0- 1.1/input0 [ 2.667014] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [ 2.682250] EXT4-fs (mmcblk0p2): 6 orphan inodes deleted [ 2.683615] EXT4-fs (mmcblk0p2): recovery complete [ 2.712816] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null) [ 2.714300] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.719625] devtmpfs: mounted [ 2.731283] Freeing unused kernel memory: 2048K [ 2.733069] Run /sbin/init as init process [ 2.734518] with arguments: [ 2.734533] /sbin/init [ 2.734547] with environment: [ 2.734562] HOME=/ [ 2.734576] TERM=linux [ 3.110651] systemd[1]: System time before build time, advancing clock. [ 3.223296] NET: Registered protocol family 10 [ 3.226289] Segment Routing with IPv6 [ 3.292642] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybr id) [ 3.297156] systemd[1]: Detected architecture arm. [ 3.399758] systemd[1]: Set hostname to . [ 4.209914] random: systemd: uninitialized urandom read (16 bytes read) [ 4.224333] random: systemd: uninitialized urandom read (16 bytes read) [ 4.226567] systemd[1]: Started Forward Password Requests to Wall Directory W atch. [ 4.230573] random: systemd: uninitialized urandom read (16 bytes read) [ 4.235521] systemd[1]: Created slice system-getty.slice. [ 4.240151] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.245069] systemd[1]: Set up automount Arbitrary Executable File Formats Fi le System Automount Point. [ 4.249711] systemd[1]: Listening on udev Control Socket. [ 4.253448] systemd[1]: Reached target Swap. [ 4.258331] systemd[1]: Created slice User and Session Slice. [ 4.370616] i2c /dev entries driver [ 4.926297] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 5.049732] systemd-journald[134]: Received request to flush runtime journal from PID 1 [ 5.078444] systemd-journald[134]: File /var/log/journal/7ef6d456588245f190bc 15ae6181e905/system.journal corrupted or uncleanly shut down, renaming and repla cing. [ 5.940346] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Reg isters at 0xfeb00000 length 0x00010000 [ 5.948182] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised : Registers at 0xfeb10000 length 0x00001000 [ 5.952328] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Reg isters at 0xfeb20000 length 0x00010000 [ 5.956571] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Regis ters at 0xfeb30000 length 0x00010000 [ 6.002646] mc: Linux media interface: v0.10 [ 6.005415] vc_sm_cma: module is from the staging directory, the quality is u nknown, you have been warned. [ 6.007590] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 6.007615] [vc_sm_connected_init]: start [ 6.024322] [vc_sm_connected_init]: installed successfully [ 6.037165] videodev: Linux video capture interface: v2.00 [ 6.076282] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned. [ 6.077370] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned. [ 6.084621] bcm2835_v4l2: module is from the staging directory, the quality i s unknown, you have been warned. [ 6.089773] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 6.095648] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 6.121301] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 6.139336] bcm2835_audio bcm2835_audio: card created with 4 channels [ 6.159269] bcm2835_audio bcm2835_audio: card created with 4 channels [ 6.316849] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase [ 6.419763] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.468923] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 6.484180] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6 [ 6.485801] usbcore: registered new interface driver brcmfmac [ 6.725570] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev /video13 [ 6.725638] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 6.725883] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 6.727283] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /de v/video14 [ 6.728330] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /de v/video15 [ 6.729318] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/ video16 [ 6.729426] bcm2835-isp bcm2835-isp: Register output node 0 with media contro ller [ 6.729528] bcm2835-isp bcm2835-isp: Register capture node 1 with media contr oller [ 6.729598] bcm2835-isp bcm2835-isp: Register capture node 2 with media contr oller [ 6.729652] bcm2835-isp bcm2835-isp: Register capture node 3 with media contr oller [ 6.730529] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 6.731897] input: STMicroelectronics 7H Custom Human interface as /devices/p latform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1- 1.1:1.0/0003:0484:5750.0001/input/input2 [ 6.732819] hid-multitouch 0003:0484:5750.0001: input,hiddev96,hidraw0: USB H ID v1.11 Device [STMicroelectronics 7H Custom Human interface] on usb-0000:01:00 .0-1.1/input0 [ 6.742170] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 6.742353] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 6.747433] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6 [ 6.747563] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6 [ 6.759443] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 6.763046] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 6.763093] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 6.778080] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 6.778132] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 6.781136] bcm2835-v4l2-0: scene mode selected 0, was 0 [ 6.781734] bcm2835-v4l2-0: V4L2 device registered as video0 - stills mode > 1280x720 [ 6.787608] bcm2835-v4l2-0: Broadcom 2835 MMAL video capture ver 0.0.2 loaded . [ 8.258376] audit: type=1400 audit(1634224624.839:2): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="nvidia_modprobe" pid=334 comm="ap parmor_parser" [ 8.258427] audit: type=1400 audit(1634224624.839:3): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=334 co mm="apparmor_parser" [ 8.258474] audit: type=1400 audit(1634224624.849:4): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/bin/man" pid=336 comm="appar mor_parser" [ 8.258517] audit: type=1400 audit(1634224624.849:5): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="man_filter" pid=336 comm="apparmo r_parser" [ 8.258561] audit: type=1400 audit(1634224624.849:6): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="man_groff" pid=336 comm="apparmor _parser" [ 8.258895] audit: type=1400 audit(1634224624.849:7): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=333 c omm="apparmor_parser" [ 8.303784] audit: type=1400 audit(1634224624.889:8): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" p id=335 comm="apparmor_parser" [ 8.303832] audit: type=1400 audit(1634224624.889:9): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=335 comm="ap parmor_parser" [ 8.303882] audit: type=1400 audit(1634224624.889:10): apparmor="STATUS" oper ation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pi d=335 comm="apparmor_parser" [ 8.312052] audit: type=1400 audit(1634224624.899:11): apparmor="STATUS" oper ation="profile_load" profile="unconfined" name="/usr/lib/arm-linux-gnueabihf/lig htdm/lightdm-guest-session" pid=337 comm="apparmor_parser" [ 8.890103] uart-pl011 fe201000.serial: no DMA platform data [ 9.067390] random: crng init done [ 9.067418] random: 7 urandom warning(s) missed due to ratelimiting [ 9.253868] 8021q: 802.1Q VLAN Support v1.8 [ 9.304819] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:1 02396k SSFS [ 9.811283] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 10.275370] bcmgenet fd580000.ethernet: configuring instance for external RGM II (RX delay) [ 10.275876] bcmgenet fd580000.ethernet eth0: Link is Down [ 14.405273] fuse: init (API version 7.32) [ 15.256623] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 15.682534] Bluetooth: Core ver 2.22 [ 15.682687] NET: Registered protocol family 31 [ 15.682696] Bluetooth: HCI device and connection manager initialized [ 15.682725] Bluetooth: HCI socket layer initialized [ 15.682741] Bluetooth: L2CAP socket layer initialized [ 15.682767] Bluetooth: SCO socket layer initialized [ 15.702675] Bluetooth: HCI UART driver ver 2.3 [ 15.702697] Bluetooth: HCI UART protocol H4 registered [ 15.702787] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 15.702977] Bluetooth: HCI UART protocol Broadcom registered [ 16.147328] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.147339] Bluetooth: BNEP filters: protocol multicast [ 16.147375] Bluetooth: BNEP socket layer initialized [ 16.230091] Bluetooth: RFCOMM TTY layer initialized [ 16.230113] Bluetooth: RFCOMM socket layer initialized [ 16.230132] Bluetooth: RFCOMM ver 1.11 [ 16.995166] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net .ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instea d