2021-11-15 18:09:17 [info] Event logging started at level debug
2021-11-15 18:09:17 [info] Running: Duet 3 Mini5plus WiFi: 3.4.0beta6 (2021-11-06 11:39:30)
2021-11-15 18:09:23 [debug] Layer 3 (4 of 150 at 1.6mm)
2021-11-15 18:09:23 [debug] Pressure advance: 0.01
2021-11-15 18:09:23 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 340.6mm

2021-11-15 18:09:35 [debug] Layer 4 (5 of 150 at 2.0mm)
2021-11-15 18:09:35 [debug] Pressure advance: 0.02
2021-11-15 18:09:35 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 358.7mm

2021-11-15 18:09:46 [debug] Layer 5 (6 of 150 at 2.4mm)
2021-11-15 18:09:46 [debug] Pressure advance: 0.02
2021-11-15 18:09:46 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 379.9mm

2021-11-15 18:09:58 [debug] Layer 6 (7 of 150 at 2.8mm)
2021-11-15 18:09:58 [debug] Pressure advance: 0.02
2021-11-15 18:09:58 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 398.7mm

2021-11-15 18:10:10 [debug] Layer 7 (8 of 150 at 3.2mm)
2021-11-15 18:10:10 [debug] Pressure advance: 0.03
2021-11-15 18:10:10 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 417.6mm

2021-11-15 18:10:22 [debug] Layer 8 (9 of 150 at 3.6mm)
2021-11-15 18:10:22 [debug] Pressure advance: 0.03
2021-11-15 18:10:22 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 436.4mm

2021-11-15 18:10:34 [debug] Layer 9 (10 of 150 at 4.0mm)
2021-11-15 18:10:34 [debug] Pressure advance: 0.04
2021-11-15 18:10:34 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 455.5mm

2021-11-15 18:10:46 [debug] Layer 10 (11 of 150 at 4.4mm)
2021-11-15 18:10:46 [debug] Pressure advance: 0.04
2021-11-15 18:10:46 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 474.4mm

2021-11-15 18:10:58 [debug] Layer 11 (12 of 150 at 4.8mm)
2021-11-15 18:10:58 [debug] Pressure advance: 0.04
2021-11-15 18:10:58 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 493.5mm

2021-11-15 18:11:10 [debug] Layer 12 (13 of 150 at 5.2mm)
2021-11-15 18:11:10 [debug] Pressure advance: 0.05
2021-11-15 18:11:10 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 512.4mm

2021-11-15 18:11:22 [debug] Layer 13 (14 of 150 at 5.6mm)
2021-11-15 18:11:22 [debug] Pressure advance: 0.05
2021-11-15 18:11:22 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 531.0mm

2021-11-15 18:11:34 [debug] Layer 14 (15 of 150 at 6.0mm)
2021-11-15 18:11:34 [debug] Pressure advance: 0.06
2021-11-15 18:11:34 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 552.2mm

2021-11-15 18:11:46 [debug] Layer 15 (16 of 150 at 6.4mm)
2021-11-15 18:11:46 [debug] Pressure advance: 0.06
2021-11-15 18:11:46 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 570.5mm

2021-11-15 18:11:57 [debug] Layer 16 (17 of 150 at 6.8mm)
2021-11-15 18:11:57 [debug] Pressure advance: 0.06
2021-11-15 18:11:57 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 589.3mm

2021-11-15 18:12:09 [debug] Layer 17 (18 of 150 at 7.2mm)
2021-11-15 18:12:09 [debug] Pressure advance: 0.07
2021-11-15 18:12:09 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 608.1mm

2021-11-15 18:12:21 [debug] Layer 18 (19 of 150 at 7.6mm)
2021-11-15 18:12:21 [debug] Pressure advance: 0.07
2021-11-15 18:12:21 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 627.2mm

2021-11-15 18:12:33 [debug] Layer 19 (20 of 150 at 8.0mm)
2021-11-15 18:12:33 [debug] Pressure advance: 0.08
2021-11-15 18:12:33 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 646.2mm

2021-11-15 18:12:45 [debug] Layer 20 (21 of 150 at 8.4mm)
2021-11-15 18:12:45 [debug] Pressure advance: 0.08
2021-11-15 18:12:45 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 665.2mm

2021-11-15 18:12:57 [debug] Layer 21 (22 of 150 at 8.8mm)
2021-11-15 18:12:57 [debug] Pressure advance: 0.08
2021-11-15 18:12:57 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 684.1mm

2021-11-15 18:13:09 [debug] Layer 22 (23 of 150 at 9.2mm)
2021-11-15 18:13:09 [debug] Pressure advance: 0.09
2021-11-15 18:13:09 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 703.2mm

2021-11-15 18:13:21 [debug] Layer 23 (24 of 150 at 9.6mm)
2021-11-15 18:13:21 [debug] Pressure advance: 0.09
2021-11-15 18:13:21 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 722.0mm

2021-11-15 18:13:33 [debug] Layer 24 (25 of 150 at 10.0mm)
2021-11-15 18:13:33 [debug] Pressure advance: 0.10
2021-11-15 18:13:33 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 740.8mm

2021-11-15 18:13:45 [debug] Layer 25 (26 of 150 at 10.4mm)
2021-11-15 18:13:45 [debug] Pressure advance: 0.10
2021-11-15 18:13:45 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 759.2mm

2021-11-15 18:13:57 [debug] Layer 26 (27 of 150 at 10.8mm)
2021-11-15 18:13:57 [debug] Pressure advance: 0.10
2021-11-15 18:13:57 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 780.5mm

2021-11-15 18:14:08 [debug] Layer 27 (28 of 150 at 11.2mm)
2021-11-15 18:14:08 [debug] Pressure advance: 0.11
2021-11-15 18:14:08 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 799.2mm

2021-11-15 18:14:20 [debug] Layer 28 (29 of 150 at 11.6mm)
2021-11-15 18:14:20 [debug] Pressure advance: 0.11
2021-11-15 18:14:20 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 818.1mm

2021-11-15 18:14:32 [debug] Layer 29 (30 of 150 at 12.0mm)
2021-11-15 18:14:32 [debug] Pressure advance: 0.12
2021-11-15 18:14:32 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 837.2mm

2021-11-15 18:14:44 [debug] Layer 30 (31 of 150 at 12.4mm)
2021-11-15 18:14:44 [debug] Pressure advance: 0.12
2021-11-15 18:14:44 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 856.1mm

2021-11-15 18:14:56 [debug] Layer 31 (32 of 150 at 12.8mm)
2021-11-15 18:14:56 [debug] Pressure advance: 0.12
2021-11-15 18:14:56 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 875.2mm

2021-11-15 18:15:08 [debug] Layer 32 (33 of 150 at 13.2mm)
2021-11-15 18:15:08 [debug] Pressure advance: 0.13
2021-11-15 18:15:08 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 894.3mm

2021-11-15 18:15:20 [debug] Layer 33 (34 of 150 at 13.6mm)
2021-11-15 18:15:20 [debug] Pressure advance: 0.13
2021-11-15 18:15:20 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 913.0mm

2021-11-15 18:15:32 [debug] Layer 34 (35 of 150 at 14.0mm)
2021-11-15 18:15:32 [debug] Pressure advance: 0.14
2021-11-15 18:15:32 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 931.8mm

2021-11-15 18:15:44 [debug] Layer 35 (36 of 150 at 14.4mm)
2021-11-15 18:15:44 [debug] Pressure advance: 0.14
2021-11-15 18:15:44 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 950.5mm

2021-11-15 18:15:56 [debug] Layer 36 (37 of 150 at 14.8mm)
2021-11-15 18:15:56 [debug] Pressure advance: 0.14
2021-11-15 18:15:56 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 969.0mm

2021-11-15 18:16:08 [debug] Layer 37 (38 of 150 at 15.2mm)
2021-11-15 18:16:08 [debug] Pressure advance: 0.15
2021-11-15 18:16:08 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 990.3mm

2021-11-15 18:16:19 [debug] Layer 38 (39 of 150 at 15.6mm)
2021-11-15 18:16:19 [debug] Pressure advance: 0.15
2021-11-15 18:16:19 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1009.0mm

2021-11-15 18:16:31 [debug] Layer 39 (40 of 150 at 16.0mm)
2021-11-15 18:16:31 [debug] Pressure advance: 0.16
2021-11-15 18:16:31 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1027.9mm

2021-11-15 18:16:43 [debug] Layer 40 (41 of 150 at 16.4mm)
2021-11-15 18:16:43 [debug] Pressure advance: 0.16
2021-11-15 18:16:43 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1047.0mm

2021-11-15 18:16:55 [debug] Layer 41 (42 of 150 at 16.8mm)
2021-11-15 18:16:55 [debug] Pressure advance: 0.16
2021-11-15 18:16:55 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1066.2mm

2021-11-15 18:17:07 [debug] Layer 42 (43 of 150 at 17.2mm)
2021-11-15 18:17:07 [debug] Pressure advance: 0.17
2021-11-15 18:17:07 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1085.2mm

2021-11-15 18:17:19 [debug] Layer 43 (44 of 150 at 17.6mm)
2021-11-15 18:17:19 [debug] Pressure advance: 0.17
2021-11-15 18:17:19 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1104.1mm

2021-11-15 18:17:31 [debug] Layer 44 (45 of 150 at 18.0mm)
2021-11-15 18:17:31 [debug] Pressure advance: 0.18
2021-11-15 18:17:31 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1123.1mm

2021-11-15 18:17:43 [debug] Layer 45 (46 of 150 at 18.4mm)
2021-11-15 18:17:43 [debug] Pressure advance: 0.18
2021-11-15 18:17:43 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1142.3mm

2021-11-15 18:17:55 [debug] Layer 46 (47 of 150 at 18.8mm)
2021-11-15 18:17:55 [debug] Pressure advance: 0.18
2021-11-15 18:17:55 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1161.5mm

2021-11-15 18:18:07 [debug] Layer 47 (48 of 150 at 19.2mm)
2021-11-15 18:18:07 [debug] Pressure advance: 0.19
2021-11-15 18:18:07 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1180.4mm

2021-11-15 18:18:19 [debug] Layer 48 (49 of 150 at 19.6mm)
2021-11-15 18:18:19 [debug] Pressure advance: 0.19
2021-11-15 18:18:19 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1199.8mm

2021-11-15 18:18:31 [debug] Layer 49 (50 of 150 at 20.0mm)
2021-11-15 18:18:31 [debug] Pressure advance: 0.20
2021-11-15 18:18:31 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.064mm/pulse, measured minimum 96%, maximum 126% over 1218.7mm

2021-11-15 18:18:42 [debug] Layer 50 (51 of 150 at 20.4mm)
2021-11-15 18:18:42 [debug] Pressure advance: 0.20
2021-11-15 18:18:42 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1237.8mm

2021-11-15 18:18:54 [debug] Layer 51 (52 of 150 at 20.8mm)
2021-11-15 18:18:54 [debug] Pressure advance: 0.20
2021-11-15 18:18:54 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1256.9mm

2021-11-15 18:19:06 [debug] Layer 52 (53 of 150 at 21.2mm)
2021-11-15 18:19:06 [debug] Pressure advance: 0.21
2021-11-15 18:19:06 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1276.1mm

2021-11-15 18:19:18 [debug] Layer 53 (54 of 150 at 21.6mm)
2021-11-15 18:19:18 [debug] Pressure advance: 0.21
2021-11-15 18:19:18 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1295.1mm

2021-11-15 18:19:30 [debug] Layer 54 (55 of 150 at 22.0mm)
2021-11-15 18:19:30 [debug] Pressure advance: 0.22
2021-11-15 18:19:30 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1314.2mm

2021-11-15 18:19:42 [debug] Layer 55 (56 of 150 at 22.4mm)
2021-11-15 18:19:42 [debug] Pressure advance: 0.22
2021-11-15 18:19:42 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1333.2mm

2021-11-15 18:19:54 [debug] Layer 56 (57 of 150 at 22.8mm)
2021-11-15 18:19:54 [debug] Pressure advance: 0.22
2021-11-15 18:19:54 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1352.4mm

2021-11-15 18:20:06 [debug] Layer 57 (58 of 150 at 23.2mm)
2021-11-15 18:20:06 [debug] Pressure advance: 0.23
2021-11-15 18:20:06 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1371.4mm

2021-11-15 18:20:18 [debug] Layer 58 (59 of 150 at 23.6mm)
2021-11-15 18:20:18 [debug] Pressure advance: 0.23
2021-11-15 18:20:18 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1390.5mm

2021-11-15 18:20:30 [debug] Layer 59 (60 of 150 at 24.0mm)
2021-11-15 18:20:30 [debug] Pressure advance: 0.24
2021-11-15 18:20:30 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1409.5mm

2021-11-15 18:20:42 [debug] Layer 60 (61 of 150 at 24.4mm)
2021-11-15 18:20:42 [debug] Pressure advance: 0.24
2021-11-15 18:20:42 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1428.7mm

2021-11-15 18:20:53 [debug] Layer 61 (62 of 150 at 24.8mm)
2021-11-15 18:20:53 [debug] Pressure advance: 0.24
2021-11-15 18:20:53 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1447.7mm

2021-11-15 18:21:05 [debug] Layer 62 (63 of 150 at 25.2mm)
2021-11-15 18:21:05 [debug] Pressure advance: 0.25
2021-11-15 18:21:05 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 126% over 1466.8mm

2021-11-15 18:21:17 [debug] Layer 63 (64 of 150 at 25.6mm)
2021-11-15 18:21:17 [debug] Pressure advance: 0.25
2021-11-15 18:21:17 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.063mm/pulse, measured minimum 96%, maximum 130% over 1486.0mm

2021-11-15 18:21:29 [debug] Layer 64 (65 of 150 at 26.0mm)
2021-11-15 18:21:29 [debug] Pressure advance: 0.26
2021-11-15 18:21:29 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.062mm/pulse, measured minimum 96%, maximum 130% over 1505.1mm

2021-11-15 18:21:41 [debug] Layer 65 (66 of 150 at 26.4mm)
2021-11-15 18:21:41 [debug] Pressure advance: 0.26
2021-11-15 18:21:41 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.062mm/pulse, measured minimum 96%, maximum 130% over 1524.1mm

2021-11-15 18:21:53 [debug] Layer 66 (67 of 150 at 26.8mm)
2021-11-15 18:21:53 [debug] Pressure advance: 0.26
2021-11-15 18:21:53 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.062mm/pulse, measured minimum 96%, maximum 130% over 1543.3mm

2021-11-15 18:22:05 [debug] Layer 67 (68 of 150 at 27.2mm)
2021-11-15 18:22:05 [debug] Pressure advance: 0.27
2021-11-15 18:22:05 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.062mm/pulse, measured minimum 96%, maximum 134% over 1562.3mm

2021-11-15 18:22:17 [debug] Layer 68 (69 of 150 at 27.6mm)
2021-11-15 18:22:17 [debug] Pressure advance: 0.27
2021-11-15 18:22:17 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.062mm/pulse, measured minimum 96%, maximum 145% over 1581.5mm

2021-11-15 18:22:29 [debug] Layer 69 (70 of 150 at 28.0mm)
2021-11-15 18:22:29 [debug] Pressure advance: 0.28
2021-11-15 18:22:29 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.062mm/pulse, measured minimum 96%, maximum 145% over 1600.4mm

2021-11-15 18:22:41 [debug] Layer 70 (71 of 150 at 28.4mm)
2021-11-15 18:22:41 [debug] Pressure advance: 0.28
2021-11-15 18:22:41 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.062mm/pulse, measured minimum 96%, maximum 145% over 1619.5mm

2021-11-15 18:22:53 [debug] Layer 71 (72 of 150 at 28.8mm)
2021-11-15 18:22:53 [debug] Pressure advance: 0.28
2021-11-15 18:22:53 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.062mm/pulse, measured minimum 96%, maximum 145% over 1638.7mm

2021-11-15 18:23:05 [debug] Layer 72 (73 of 150 at 29.2mm)
2021-11-15 18:23:05 [debug] Pressure advance: 0.29
2021-11-15 18:23:05 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.062mm/pulse, measured minimum 96%, maximum 145% over 1657.4mm

2021-11-15 18:23:16 [debug] Layer 73 (74 of 150 at 29.6mm)
2021-11-15 18:23:16 [debug] Pressure advance: 0.29
2021-11-15 18:23:16 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.061mm/pulse, measured minimum 96%, maximum 145% over 1676.8mm

2021-11-15 18:23:28 [debug] Layer 74 (75 of 150 at 30.0mm)
2021-11-15 18:23:28 [debug] Pressure advance: 0.30
2021-11-15 18:23:28 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.061mm/pulse, measured minimum 96%, maximum 145% over 1695.8mm

2021-11-15 18:23:40 [debug] Layer 75 (76 of 150 at 30.4mm)
2021-11-15 18:23:40 [debug] Pressure advance: 0.30
2021-11-15 18:23:40 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.061mm/pulse, measured minimum 96%, maximum 145% over 1715.0mm

2021-11-15 18:23:52 [debug] Layer 76 (77 of 150 at 30.8mm)
2021-11-15 18:23:52 [debug] Pressure advance: 0.30
2021-11-15 18:23:52 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.061mm/pulse, measured minimum 96%, maximum 148% over 1734.3mm

2021-11-15 18:24:04 [debug] Layer 77 (78 of 150 at 31.2mm)
2021-11-15 18:24:04 [debug] Pressure advance: 0.31
2021-11-15 18:24:04 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.061mm/pulse, measured minimum 96%, maximum 148% over 1753.3mm

2021-11-15 18:24:16 [debug] Layer 78 (79 of 150 at 31.6mm)
2021-11-15 18:24:16 [debug] Pressure advance: 0.31
2021-11-15 18:24:16 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.061mm/pulse, measured minimum 96%, maximum 148% over 1772.4mm

2021-11-15 18:24:28 [debug] Layer 79 (80 of 150 at 32.0mm)
2021-11-15 18:24:28 [debug] Pressure advance: 0.32
2021-11-15 18:24:28 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.061mm/pulse, measured minimum 96%, maximum 151% over 1791.4mm

2021-11-15 18:24:40 [debug] Layer 80 (81 of 150 at 32.4mm)
2021-11-15 18:24:40 [debug] Pressure advance: 0.32
2021-11-15 18:24:40 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.061mm/pulse, measured minimum 96%, maximum 151% over 1810.5mm

2021-11-15 18:24:52 [debug] Layer 81 (82 of 150 at 32.8mm)
2021-11-15 18:24:52 [debug] Pressure advance: 0.32
2021-11-15 18:24:52 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.060mm/pulse, measured minimum 96%, maximum 151% over 1829.5mm

2021-11-15 18:25:04 [debug] Layer 82 (83 of 150 at 33.2mm)
2021-11-15 18:25:04 [debug] Pressure advance: 0.33
2021-11-15 18:25:04 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.060mm/pulse, measured minimum 96%, maximum 153% over 1848.5mm

2021-11-15 18:25:16 [debug] Layer 83 (84 of 150 at 33.6mm)
2021-11-15 18:25:16 [debug] Pressure advance: 0.33
2021-11-15 18:25:16 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.060mm/pulse, measured minimum 96%, maximum 153% over 1867.7mm

2021-11-15 18:25:28 [debug] Layer 84 (85 of 150 at 34.0mm)
2021-11-15 18:25:28 [debug] Pressure advance: 0.34
2021-11-15 18:25:28 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.060mm/pulse, measured minimum 96%, maximum 153% over 1886.8mm

2021-11-15 18:25:39 [debug] Layer 85 (86 of 150 at 34.4mm)
2021-11-15 18:25:39 [debug] Pressure advance: 0.34
2021-11-15 18:25:39 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.060mm/pulse, measured minimum 96%, maximum 169% over 1906.2mm

2021-11-15 18:25:51 [debug] Layer 86 (87 of 150 at 34.8mm)
2021-11-15 18:25:51 [debug] Pressure advance: 0.34
2021-11-15 18:25:51 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.060mm/pulse, measured minimum 96%, maximum 172% over 1925.3mm

2021-11-15 18:26:03 [debug] Layer 87 (88 of 150 at 35.2mm)
2021-11-15 18:26:03 [debug] Pressure advance: 0.35
2021-11-15 18:26:03 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.060mm/pulse, measured minimum 96%, maximum 172% over 1944.1mm

2021-11-15 18:26:15 [debug] Layer 88 (89 of 150 at 35.6mm)
2021-11-15 18:26:15 [debug] Pressure advance: 0.35
2021-11-15 18:26:15 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.059mm/pulse, measured minimum 96%, maximum 174% over 1963.4mm

2021-11-15 18:26:27 [debug] Layer 89 (90 of 150 at 36.0mm)
2021-11-15 18:26:27 [debug] Pressure advance: 0.36
2021-11-15 18:26:27 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.059mm/pulse, measured minimum 96%, maximum 174% over 1982.5mm

2021-11-15 18:26:39 [debug] Layer 90 (91 of 150 at 36.4mm)
2021-11-15 18:26:39 [debug] Pressure advance: 0.36
2021-11-15 18:26:39 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.059mm/pulse, measured minimum 96%, maximum 179% over 1998.8mm

2021-11-15 18:26:51 [debug] Layer 91 (92 of 150 at 36.8mm)
2021-11-15 18:26:51 [debug] Pressure advance: 0.36
2021-11-15 18:26:51 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.059mm/pulse, measured minimum 96%, maximum 179% over 2020.8mm

2021-11-15 18:27:03 [debug] Layer 92 (93 of 150 at 37.2mm)
2021-11-15 18:27:03 [debug] Pressure advance: 0.37
2021-11-15 18:27:03 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.059mm/pulse, measured minimum 96%, maximum 183% over 2039.7mm

2021-11-15 18:27:15 [debug] Layer 93 (94 of 150 at 37.6mm)
2021-11-15 18:27:15 [debug] Pressure advance: 0.37
2021-11-15 18:27:15 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.059mm/pulse, measured minimum 96%, maximum 185% over 2059.0mm

2021-11-15 18:27:27 [debug] Layer 94 (95 of 150 at 38.0mm)
2021-11-15 18:27:27 [debug] Pressure advance: 0.38
2021-11-15 18:27:27 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.059mm/pulse, measured minimum 96%, maximum 185% over 2077.8mm

2021-11-15 18:27:39 [debug] Layer 95 (96 of 150 at 38.4mm)
2021-11-15 18:27:39 [debug] Pressure advance: 0.38
2021-11-15 18:27:39 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.058mm/pulse, measured minimum 96%, maximum 187% over 2097.1mm

2021-11-15 18:27:51 [debug] Layer 96 (97 of 150 at 38.8mm)
2021-11-15 18:27:51 [debug] Pressure advance: 0.38
2021-11-15 18:27:51 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.058mm/pulse, measured minimum 96%, maximum 187% over 2115.9mm

2021-11-15 18:28:03 [debug] Layer 97 (98 of 150 at 39.2mm)
2021-11-15 18:28:03 [debug] Pressure advance: 0.39
2021-11-15 18:28:03 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.058mm/pulse, measured minimum 96%, maximum 187% over 2135.2mm

2021-11-15 18:28:14 [debug] Layer 98 (99 of 150 at 39.6mm)
2021-11-15 18:28:14 [debug] Pressure advance: 0.39
2021-11-15 18:28:14 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.058mm/pulse, measured minimum 96%, maximum 187% over 2154.3mm

2021-11-15 18:28:26 [debug] Layer 99 (100 of 150 at 40.0mm)
2021-11-15 18:28:26 [debug] Pressure advance: 0.40
2021-11-15 18:28:26 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.058mm/pulse, measured minimum 96%, maximum 187% over 2170.5mm

2021-11-15 18:28:38 [debug] Layer 100 (101 of 150 at 40.4mm)
2021-11-15 18:28:38 [debug] Pressure advance: 0.40
2021-11-15 18:28:38 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.058mm/pulse, measured minimum 96%, maximum 195% over 2192.5mm

2021-11-15 18:28:50 [debug] Layer 101 (102 of 150 at 40.8mm)
2021-11-15 18:28:50 [debug] Pressure advance: 0.40
2021-11-15 18:28:50 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 50% to 200%, check every 3.0mm, measured sensitivity 0.057mm/pulse, measured minimum 96%, maximum 195% over 2208.8mm

2021-11-15 18:28:50 [warn] Resume state saved
2021-11-15 18:28:50 [info] M291: - Printing paused - Extruder 0 reported 'tooMuchMovement'
2021-11-15 18:28:50 [debug] - Printing paused -
2021-11-15 18:28:50 [debug] Extruder 0 reported 'tooMuchMovement'
2021-11-15 18:28:50 [warn] Extruder 0 reported 'tooMuchMovement'
2021-11-15 18:28:55 [warn] Printing paused at X-38.9 Y156.8 Z40.8
2021-11-15 18:28:55 [debug] Printing paused at X-38.9 Y156.8 Z40.8
2021-11-15 18:29:21 [info] M292: cancelled: false
2021-11-15 18:31:15 [warn] Printing resumed
2021-11-15 18:31:15 [debug] Printing resumed
2021-11-15 18:31:25 [debug] Layer 102 (103 of 150 at 41.2mm)
2021-11-15 18:31:25 [debug] Pressure advance: 0.41
2021-11-15 18:31:25 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 0% to 1000%, check every 3.0mm, no calibration data
2021-11-15 18:31:37 [debug] Layer 103 (104 of 150 at 41.6mm)
2021-11-15 18:31:37 [debug] Pressure advance: 0.41
2021-11-15 18:31:37 [debug] Pulse-type filament monitor on pin io4.in, enabled, sensitivity 0.064mm/pulse, allowed movement 0% to 1000%, check every 3.0mm, measured sensitivity 0.041mm/pulse, measured minimum 98%, maximum 229% over 28.9mm

2021-11-15 18:31:42 [warn] Resume state saved
2021-11-15 18:31:47 [warn] Printing paused at X11.1 Y156.8 Z41.6
2021-11-15 18:31:47 [debug] Printing paused at X11.1 Y156.8 Z41.6
2021-11-15 18:31:47 [debug] Done printing file
2021-11-15 18:31:47 [debug] Done printing file
2021-11-15 18:31:47 [warn] Cancelled printing file 0:/gcodes/PATuning.g, print time was 0h 24m
2021-11-15 18:32:11 [info] Event logging stopped