; =========================================================================================================
;
; start script for PrusaSlicer for CaribouDuet
;
; =========================================================================================================
;
G28                                  ; home all axis without mesh bed level
G0 X60 Y-3 Z80                       ; move extruder above bed, keep extruder in front for cleaning and checking
;
M104 S160 T0                         ; pre-heat extruder to 160°C
M140 S[first_layer_bed_temperature]  ; this will take the layer 1 temperature for bed 0
M190 S[first_layer_bed_temperature]  ; wait for bed temp
;
G29                                  ; mesh bed leveling using defined mesh grid
G0 X0 Y-3 Z0.6                       ; go outside print area
;
M104 S[first_layer_temperature]      ; set extruder temperature
M109 S[first_layer_temperature]      ; wait for extruder temp
;
; =========================================================================================================
;
;
M98 P"0:/sys/primeLine.g"           ; execute primeline macro
;
G92 E0.0                            ; set extruder position
;
M572 D0 S0.07                       ; set pressure advance
;
; =========================================================================================================