1/29/2022, 3:14:27 PM M122 === Diagnostics === RepRapFirmware for Duet 3 Mini 5+ version 3.3 (2021-06-15 21:46:11) running on Duet 3 Mini5plus WiFi (standalone mode) Board ID: KSRLK-MU9RL-D65J0-40KMG-0QW2Z-HY6N6 Used output buffers: 3 of 40 (26 max) === RTOS === Static ram: 102724 Dynamic ram: 107520 of which 72 recycled Never used RAM 33388, free system stack 204 words Tasks: ACCEL(notifyWait,0.0%,346) NETWORK(ready,14.9%,262) HEAT(notifyWait,0.0%,366) Move(notifyWait,0.1%,362) CanReceiv(notifyWait,0.0%,941) CanSender(notifyWait,0.0%,371) CanClock(delaying,0.0%,340) TMC(notifyWait,0.6%,115) MAIN(running,83.6%,426) IDLE(ready,0.0%,29) AIN(delaying,0.8%,273), total 100.0% Owned mutexes: WiFi(NETWORK) === Platform === Last reset 00:00:45 ago, cause: software Last software reset at 2022-01-29 15:13, reason: User, GCodes spinning, available RAM 33388, slot 2 Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a Error status: 0x00 Aux0 errors 0,0,0 MCU revision 3, ADC conversions started 45021, completed 45021, timed out 0, errs 0 Step timer max interval 751 MCU temperature: min 32.0, current 32.2, max 32.2 Supply voltage: min 23.8, current 23.8, max 23.8, under voltage events: 0, over voltage events: 0, power good: yes Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0 Driver 0: position 46857, standstill, SG min/max 2/2, read errors 0, write errors 0, ifcnt 73, reads 528, writes 0, timeouts 0, DMA errors 0 Driver 1: position 46857, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 73, reads 528, writes 0, timeouts 0, DMA errors 0 Driver 2: position 46857, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 73, reads 528, writes 0, timeouts 0, DMA errors 0 Driver 3: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 69, reads 528, writes 0, timeouts 0, DMA errors 0 Driver 4: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 69, reads 528, writes 0, timeouts 0, DMA errors 0 Driver 5: position 0, assumed not present Driver 6: position 0, assumed not present Date/time: 2022-01-29 15:14:26 Cache data hit count 87675484 Slowest loop: 5.17ms; fastest: 0.11ms === Storage === Free file entries: 10 SD card 0 detected, interface speed: 22.5MBytes/sec SD card longest read time 3.2ms, write time 0.0ms, max retries 0 === Move === DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000 === MainDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === Heat === Bed heaters = 0 -1, chamberHeaters = -1 -1 === GCodes === Segments left: 0 Movement lock held by null HTTP is idle in state(s) 0 Telnet is idle in state(s) 0 File is idle in state(s) 0 USB is idle in state(s) 0 Aux is idle in state(s) 0 Trigger is idle in state(s) 0 Queue is idle in state(s) 0 LCD is idle in state(s) 0 SBC is idle in state(s) 0 Daemon is idle in state(s) 0 Aux2 is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty. === CAN === Messages queued 91, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 17 (min 17), ts 51/0/0 Tx timeouts 0,0,51,0,0,40 last cancelled message type 30 dest 127 === Network === Slowest loop: 201.51ms; fastest: 0.06ms Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions HTTP sessions: 1 of 8 - WiFi - Network state is active WiFi module is connected to access point Failed messages: pending 0, notready 0, noresp 3 WiFi firmware version 1.26 WiFi MAC address 8c:aa:b5:ed:0e:96 WiFi Vcc 3.31, reset reason Power up WiFi flash size 2097152, free heap 23760 WiFi IP address 192.168.50.135 WiFi signal strength -59dBm, mode 802.11n, reconnections 0, sleep mode modem Clock register 00002002 Socket states: 0 0 0 0 0 0 0 0 1/29/2022, 3:14:24 PM M955 P0 C"io2.out+io2.in" Accelerometer 0:0 with orientation 20 samples at 1344Hz with 10-bit resolution 1/29/2022, 3:14:17 PM M122 === Diagnostics === RepRapFirmware for Duet 3 Mini 5+ version 3.3 (2021-06-15 21:46:11) running on Duet 3 Mini5plus WiFi (standalone mode) Board ID: KSRLK-MU9RL-D65J0-40KMG-0QW2Z-HY6N6 Used output buffers: 3 of 40 (26 max) === RTOS === Static ram: 102724 Dynamic ram: 105580 of which 312 recycled Never used RAM 35088, free system stack 206 words Tasks: NETWORK(ready,14.8%,262) HEAT(delaying,0.0%,366) Move(notifyWait,0.1%,362) CanReceiv(notifyWait,0.0%,941) CanSender(notifyWait,0.0%,371) CanClock(delaying,0.0%,340) TMC(notifyWait,0.6%,115) MAIN(running,83.6%,426) IDLE(ready,0.0%,29) AIN(delaying,0.8%,273), total 100.0% Owned mutexes: WiFi(NETWORK) === Platform === Last reset 00:00:34 ago, cause: software Last software reset at 2022-01-29 15:13, reason: User, GCodes spinning, available RAM 33388, slot 2 Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a Error status: 0x00 Aux0 errors 0,0,0 MCU revision 3, ADC conversions started 34989, completed 34988, timed out 0, errs 0 Step timer max interval 1013 MCU temperature: min 32.0, current 32.0, max 32.2 Supply voltage: min 23.8, current 23.8, max 23.8, under voltage events: 0, over voltage events: 0, power good: yes Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0 Driver 0: position 46857, standstill, SG min/max 2/2, read errors 0, write errors 0, ifcnt 73, reads 438, writes 0, timeouts 0, DMA errors 0 Driver 1: position 46857, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 73, reads 438, writes 0, timeouts 0, DMA errors 0 Driver 2: position 46857, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 73, reads 438, writes 0, timeouts 0, DMA errors 0 Driver 3: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 69, reads 438, writes 0, timeouts 0, DMA errors 0 Driver 4: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 69, reads 438, writes 0, timeouts 0, DMA errors 0 Driver 5: position 0, assumed not present Driver 6: position 0, assumed not present Date/time: 2022-01-29 15:14:16 Cache data hit count 68331446 Slowest loop: 5.05ms; fastest: 0.11ms === Storage === Free file entries: 10 SD card 0 detected, interface speed: 22.5MBytes/sec SD card longest read time 3.2ms, write time 0.0ms, max retries 0 === Move === DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000 === MainDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === Heat === Bed heaters = 0 -1, chamberHeaters = -1 -1 === GCodes === Segments left: 0 Movement lock held by null HTTP is idle in state(s) 0 Telnet is idle in state(s) 0 File is idle in state(s) 0 USB is idle in state(s) 0 Aux is idle in state(s) 0 Trigger is idle in state(s) 0 Queue is idle in state(s) 0 LCD is idle in state(s) 0 SBC is idle in state(s) 0 Daemon is idle in state(s) 0 Aux2 is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty. === CAN === Messages queued 75, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 17 (min 17), ts 41/0/0 Tx timeouts 0,0,41,0,0,34 last cancelled message type 4514 dest 127 === Network === Slowest loop: 203.59ms; fastest: 0.06ms Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions HTTP sessions: 1 of 8 - WiFi - Network state is active WiFi module is connected to access point Failed messages: pending 0, notready 0, noresp 2 WiFi firmware version 1.26 WiFi MAC address 8c:aa:b5:ed:0e:96 WiFi Vcc 3.30, reset reason Power up WiFi flash size 2097152, free heap 26456 WiFi IP address 192.168.50.135 WiFi signal strength -60dBm, mode 802.11n, reconnections 0, sleep mode modem Clock register 00002002 Socket states: 4 0 0 0 0 0 0 0 1/29/2022, 3:14:15 PM M955 P0 C"io2.in+io2.out" Error: M955: Accelerometer not found on specified port 1/29/2022, 3:14:09 PM M122 === Diagnostics === RepRapFirmware for Duet 3 Mini 5+ version 3.3 (2021-06-15 21:46:11) running on Duet 3 Mini5plus WiFi (standalone mode) Board ID: KSRLK-MU9RL-D65J0-40KMG-0QW2Z-HY6N6 Used output buffers: 3 of 40 (26 max) === RTOS === Static ram: 102724 Dynamic ram: 105580 of which 312 recycled Never used RAM 35088, free system stack 206 words Tasks: NETWORK(ready,14.9%,262) HEAT(notifyWait,0.0%,366) Move(notifyWait,0.1%,362) CanReceiv(notifyWait,0.0%,941) CanSender(notifyWait,0.0%,371) CanClock(delaying,0.0%,340) TMC(notifyWait,0.6%,115) MAIN(running,83.6%,426) IDLE(ready,0.0%,29) AIN(delaying,0.8%,273), total 100.0% Owned mutexes: WiFi(NETWORK) === Platform === Last reset 00:00:26 ago, cause: software Last software reset at 2022-01-29 15:13, reason: User, GCodes spinning, available RAM 33388, slot 2 Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a Error status: 0x00 Aux0 errors 0,0,0 MCU revision 3, ADC conversions started 26665, completed 26665, timed out 0, errs 0 Step timer max interval 770 MCU temperature: min 32.0, current 32.2, max 32.2 Supply voltage: min 23.8, current 23.8, max 23.8, under voltage events: 0, over voltage events: 0, power good: yes Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0 Driver 0: position 46857, standstill, SG min/max 2/2, read errors 0, write errors 0, ifcnt 73, reads 619, writes 0, timeouts 0, DMA errors 0 Driver 1: position 46857, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 73, reads 619, writes 0, timeouts 0, DMA errors 0 Driver 2: position 46857, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 73, reads 620, writes 0, timeouts 0, DMA errors 0 Driver 3: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 69, reads 619, writes 0, timeouts 0, DMA errors 0 Driver 4: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 69, reads 619, writes 0, timeouts 0, DMA errors 0 Driver 5: position 0, assumed not present Driver 6: position 0, assumed not present Date/time: 2022-01-29 15:14:07 Cache data hit count 52281812 Slowest loop: 5.09ms; fastest: 0.11ms === Storage === Free file entries: 10 SD card 0 detected, interface speed: 22.5MBytes/sec SD card longest read time 3.2ms, write time 0.0ms, max retries 0 === Move === DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000 === MainDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === Heat === Bed heaters = 0 -1, chamberHeaters = -1 -1 === GCodes === Segments left: 0 Movement lock held by null HTTP is idle in state(s) 0 Telnet is idle in state(s) 0 File is idle in state(s) 0 USB is idle in state(s) 0 Aux is idle in state(s) 0 Trigger is idle in state(s) 0 Queue is idle in state(s) 0 LCD is idle in state(s) 0 SBC is idle in state(s) 0 Daemon is idle in state(s) 0 Aux2 is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty. === CAN === Messages queued 106, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 17 (min 17), ts 59/0/0 Tx timeouts 0,0,59,0,0,47 last cancelled message type 30 dest 127 === Network === Slowest loop: 202.63ms; fastest: 0.06ms Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions HTTP sessions: 1 of 8 - WiFi - Network state is active WiFi module is connected to access point Failed messages: pending 0, notready 0, noresp 1 WiFi firmware version 1.26 WiFi MAC address 8c:aa:b5:ed:0e:96 WiFi Vcc 3.30, reset reason Power up WiFi flash size 2097152, free heap 25448 WiFi IP address 192.168.50.135 WiFi signal strength -60dBm, mode 802.11n, reconnections 0, sleep mode modem Clock register 00002002 Socket states: 0 0 0 0 0 0 0 0 1/29/2022, 3:14:03 PM M955 P0 C"io2.out+io2.in" Error: M955: Accelerometer not found on specified port 1/29/2022, 3:13:57 PM M122 === Diagnostics === RepRapFirmware for Duet 3 Mini 5+ version 3.3 (2021-06-15 21:46:11) running on Duet 3 Mini5plus WiFi (standalone mode) Board ID: KSRLK-MU9RL-D65J0-40KMG-0QW2Z-HY6N6 Used output buffers: 3 of 40 (12 max) === RTOS === Static ram: 102724 Dynamic ram: 105580 of which 72 recycled Never used RAM 35328, free system stack 206 words Tasks: NETWORK(ready,11.3%,262) HEAT(notifyWait,0.0%,366) Move(notifyWait,0.1%,362) CanReceiv(notifyWait,0.0%,941) CanSender(notifyWait,0.0%,371) CanClock(delaying,0.0%,340) TMC(notifyWait,0.6%,115) MAIN(running,85.8%,426) IDLE(ready,1.5%,29) AIN(delaying,0.8%,273), total 100.0% Owned mutexes: WiFi(NETWORK) === Platform === Last reset 00:00:14 ago, cause: software Last software reset at 2022-01-29 15:13, reason: User, GCodes spinning, available RAM 33388, slot 2 Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00000000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a Error status: 0x00 Aux0 errors 0,0,0 MCU revision 3, ADC conversions started 14899, completed 14899, timed out 0, errs 0 Step timer max interval 751 MCU temperature: min 31.3, current 32.2, max 32.2 Supply voltage: min 23.8, current 23.8, max 23.8, under voltage events: 0, over voltage events: 0, power good: yes Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0 Driver 0: position 46857, standstill, SG min/max 2/2, read errors 0, write errors 1, ifcnt 73, reads 764, writes 9, timeouts 0, DMA errors 0 Driver 1: position 46857, standstill, SG min/max 0/0, read errors 0, write errors 1, ifcnt 73, reads 764, writes 9, timeouts 0, DMA errors 0 Driver 2: position 46857, standstill, SG min/max 0/0, read errors 0, write errors 1, ifcnt 73, reads 763, writes 9, timeouts 0, DMA errors 0 Driver 3: position 0, standstill, SG min/max 0/0, read errors 0, write errors 1, ifcnt 69, reads 763, writes 9, timeouts 0, DMA errors 0 Driver 4: position 0, standstill, SG min/max 0/0, read errors 0, write errors 1, ifcnt 69, reads 764, writes 9, timeouts 0, DMA errors 0 Driver 5: position 0, assumed not present Driver 6: position 0, assumed not present Date/time: 2022-01-29 15:13:56 Cache data hit count 29607012 Slowest loop: 5.13ms; fastest: 0.11ms === Storage === Free file entries: 10 SD card 0 detected, interface speed: 22.5MBytes/sec SD card longest read time 3.3ms, write time 0.0ms, max retries 0 === Move === DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000 === MainDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === Heat === Bed heaters = 0 -1, chamberHeaters = -1 -1 === GCodes === Segments left: 0 Movement lock held by null HTTP is idle in state(s) 0 Telnet is idle in state(s) 0 File is idle in state(s) 0 USB is idle in state(s) 0 Aux is idle in state(s) 0 Trigger is idle in state(s) 0 Queue is idle in state(s) 0 LCD is idle in state(s) 0 SBC is idle in state(s) 0 Daemon is idle in state(s) 0 Aux2 is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty. === CAN === Messages queued 133, received 0, lost 0, longest wait 0ms for reply type 0, peak Tx sync delay 0, free buffers 17 (min 17), ts 75/0/0 Tx timeouts 0,0,74,0,0,57 last cancelled message type 30 dest 127 === Network === Slowest loop: 9.69ms; fastest: 0.00ms Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions HTTP sessions: 1 of 8 - WiFi - Network state is active WiFi module is connected to access point Failed messages: pending 0, notready 0, noresp 0 WiFi firmware version 1.26 WiFi MAC address 8c:aa:b5:ed:0e:96 WiFi Vcc 3.30, reset reason Power up WiFi flash size 2097152, free heap 24376 WiFi IP address 192.168.50.135 WiFi signal strength -60dBm, mode 802.11n, reconnections 0, sleep mode modem Clock register 00002002 Socket states: 0 0 0 0 0 0 0 0