13/07/2022, 14:29:30	M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.1rc1 (2022-05-03 09:34:00) running on Duet Ethernet 1.02 or later + DueX5
Board ID: 08DGM-956GU-DJMSJ-6J9F6-3S86T-9BPVH
Used output buffers: 3 of 26 (19 max)
=== RTOS ===
Static ram: 23868
Dynamic ram: 71696 of which 104 recycled
Never used RAM 16268, free system stack 124 words
Tasks: NETWORK(ready,23.8%,218) HEAT(notifyWait,0.0%,332) Move(notifyWait,0.0%,269) DUEX(notifyWait,0.0%,24) MAIN(running,76.0%,434) IDLE(ready,0.2%,30), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:06:49 ago, cause: power up
Last software reset at 2022-07-13 12:13, reason: User, GCodes spinning, available RAM 16268, slot 2
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Step timer max interval 0
MCU temperature: min 43.5, current 51.2, max 51.9
Supply voltage: min 24.5, current 24.7, max 25.2, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 1
Driver 1: standstill, SG min 14
Driver 2: standstill, SG min 0
Driver 3: standstill, SG min 0
Driver 4: standstill, SG min 0
Driver 5: standstill, SG min n/a
Driver 6: standstill, SG min n/a
Driver 7: standstill, SG min 0
Driver 8: standstill, SG min 0
Driver 9: standstill, SG min 0
Driver 10: 
Driver 11: 
Date/time: 2022-07-13 14:29:29
Cache data hit count 4294967295
Slowest loop: 10.90ms; fastest: 0.19ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 8
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 4.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 6, maxWait 42390ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 21, completed 21, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 2], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 0 is on, I-accum = 0.5
Heater 1 is on, I-accum = 0.5
=== GCodes ===
Segments left: 0
Movement lock held by HTTP
HTTP is doing "G4 S0.1[0x09][0x09]" in state(s) 0 0 15, running macro
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== DueX ===
Read count 1, 0.15 reads/min
=== Network ===
Slowest loop: 12.12ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8
Interface state active, link 100Mbps full duplex
13/07/2022, 14:29:30	G1 X100 Y100
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.1rc1 (2022-05-03 09:34:00) running on Duet Ethernet 1.02 or later + DueX5
Board ID: 08DGM-956GU-DJMSJ-6J9F6-3S86T-9BPVH
Used output buffers: 3 of 26 (19 max)
=== RTOS ===
Static ram: 23868
Dynamic ram: 71696 of which 104 recycled
Never used RAM 16268, free system stack 124 words
Tasks: NETWORK(ready,23.8%,218) HEAT(notifyWait,0.0%,332) Move(notifyWait,0.0%,269) DUEX(notifyWait,0.0%,24) MAIN(running,76.0%,434) IDLE(ready,0.2%,30), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:06:49 ago, cause: power up
Last software reset at 2022-07-13 12:13, reason: User, GCodes spinning, available RAM 16268, slot 2
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Step timer max interval 0
MCU temperature: min 43.5, current 51.2, max 51.9
Supply voltage: min 24.5, current 24.7, max 25.2, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 1
Driver 1: standstill, SG min 14
Driver 2: standstill, SG min 0
Driver 3: standstill, SG min 0
Driver 4: standstill, SG min 0
Driver 5: standstill, SG min n/a
Driver 6: standstill, SG min n/a
Driver 7: standstill, SG min 0
Driver 8: standstill, SG min 0
Driver 9: standstill, SG min 0
Driver 10: 
Driver 11: 
Date/time: 2022-07-13 14:29:29
Cache data hit count 4294967295
Slowest loop: 10.90ms; fastest: 0.19ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 8
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 4.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 6, maxWait 42390ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 21, completed 21, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 2], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 0 is on, I-accum = 0.5
Heater 1 is on, I-accum = 0.5
=== GCodes ===
Segments left: 0
Movement lock held by HTTP
HTTP is doing "G4 S0.1[0x09][0x09]" in state(s) 0 0 15, running macro
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== DueX ===
Read count 1, 0.15 reads/min
=== Network ===
Slowest loop: 12.12ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8
Interface state active, link 100Mbps full duplex
13/07/2022, 14:29:30	G28
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.1rc1 (2022-05-03 09:34:00) running on Duet Ethernet 1.02 or later + DueX5
Board ID: 08DGM-956GU-DJMSJ-6J9F6-3S86T-9BPVH
Used output buffers: 3 of 26 (19 max)
=== RTOS ===
Static ram: 23868
Dynamic ram: 71696 of which 104 recycled
Never used RAM 16268, free system stack 124 words
Tasks: NETWORK(ready,23.8%,218) HEAT(notifyWait,0.0%,332) Move(notifyWait,0.0%,269) DUEX(notifyWait,0.0%,24) MAIN(running,76.0%,434) IDLE(ready,0.2%,30), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:06:49 ago, cause: power up
Last software reset at 2022-07-13 12:13, reason: User, GCodes spinning, available RAM 16268, slot 2
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x00
Step timer max interval 0
MCU temperature: min 43.5, current 51.2, max 51.9
Supply voltage: min 24.5, current 24.7, max 25.2, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 0/0, heap memory allocated/used/recyclable 0/0/0, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 1
Driver 1: standstill, SG min 14
Driver 2: standstill, SG min 0
Driver 3: standstill, SG min 0
Driver 4: standstill, SG min 0
Driver 5: standstill, SG min n/a
Driver 6: standstill, SG min n/a
Driver 7: standstill, SG min 0
Driver 8: standstill, SG min 0
Driver 9: standstill, SG min 0
Driver 10: 
Driver 11: 
Date/time: 2022-07-13 14:29:29
Cache data hit count 4294967295
Slowest loop: 10.90ms; fastest: 0.19ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 8
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 4.0ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 6, maxWait 42390ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 21, completed 21, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 2], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 0 is on, I-accum = 0.5
Heater 1 is on, I-accum = 0.5
=== GCodes ===
Segments left: 0
Movement lock held by HTTP
HTTP is doing "G4 S0.1[0x09][0x09]" in state(s) 0 0 15, running macro
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty
=== DueX ===
Read count 1, 0.15 reads/min
=== Network ===
Slowest loop: 12.12ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8
Interface state active, link 100Mbps full duplex