GCode 1:

G1 X84.801 Y129.865 E0.035
G1 X84.725 Y130.931 E0.03555
G1 X84.7 Y132.018 E0.03616
G0 F5400 X84.704 Y132.218
;TIME_ELAPSED:11824.474892
G1 F1500 E-6.5
M140 S0
M82 ;absolute extrusion mode
M104 S0
M140 S0
;Retract the filament
G92 E1
G1 E-1 F300
G28 X0 Y0
M84
M83 ;relative extrusion mode
M104 S0
;End of Gcode
;SETTING_3 {"global_quality": "[general]\\nversion = 4\\nname = Draft #2\\ndefin
;SETTING_3 ition = custom\\n\\n[metadata]\\ntype = quality_changes\\nquality_typ
;SETTING_3 e = draft\\nsetting_version = 20\\n\\n[values]\\nadhesion_type = brim
;SETTING_3 \\nlayer_height_0 = 0.2\\nmaterial_bed_temperature = 70\\n\\n", "extr
;SETTING_3 uder_quality": ["[general]\\nversion = 4\\nname = Draft #2\\ndefiniti
;SETTING_3 on = custom\\n\\n[metadata]\\ntype = quality_changes\\nquality_type =
;SETTING_3  draft\\nsetting_version = 20\\nposition = 0\\n\\n[values]\\ninfill_s
;SETTING_3 parse_density = 30\\nmaterial_print_temperature = 235\\nspeed_travel 
;SETTING_3 = 90\\nwall_line_count = 3\\n\\n"]}

##########################################################################################

Gcode 2:

G1 F2700 X150.028 Y88.831 E6563.00469
G0 F4800 X148.357 Y91.351
G1 F2700 X145.346 Y94.362 E6563.42957
M107
G1 F3600 E6559.42957
G1 Z100.800
G0 F4800 X145.346 Y94.362 Z105.000
; Default end code
;G1 X0 Y0 Z130 ; Get extruder out of way. Uncomment to use!
M107 ; Turn off fan
; Disable all extruder
G91 ; Relative positioning
T0
G1 E-1 ; Reduce filament pressure
M104 T0 S0
G90 ; Absolute positioning
G92 E0 ; Reset extruder position
M140 S0 ; Disable heated bed
M84 ; Turn steppers off