12/27/2024, 4:43:24 PM: m122: === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 13 of 40 (36 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124564 of which 12 recycled
Never used RAM 10824, free system stack 198 words
Tasks: NETWORK(2,nWait 7,11.9%,211) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,337) Move(4,nWait 6,0.0%,355) CanReceiv(6,nWait 1,0.1%,798) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,352) TMC(4,delaying,1.5%,101) MAIN(1,running,84.7%,665) IDLE(0,ready,1.1%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:00:28 ago, cause: software
Last software reset at 2024-12-27 16:42, reason: HardFault bfarValid precise, Expansion spinning, available RAM 9544, slot 0
Software reset code 0x4072 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b0f 0000000a 00000001 20033b0f 0009e8e9 000a1478 61010000 2002c438 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 a5a76ae7 00000000 00000113 2002c658 20031990 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 21388, completed 21387, timed out 0, errs 0
MCU temperature: min 37.2, current 37.4, max 38.6
Supply voltage: min 24.3, current 24.4, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 105, reads 2532, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 0, read errors 0, write errors 1, ifcnt 107, reads 2531, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 54, reads 2534, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 4, read errors 0, write errors 1, ifcnt 109, reads 2531, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 2, read errors 0, write errors 1, ifcnt 107, reads 2532, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 0, read errors 0, write errors 1, ifcnt 108, reads 2531, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 54, reads 2534, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-27 16:43:21
Cache data hit count 53217681
Slowest loop: 8.67ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 2.5ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 262, received 817, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6034, peak Tx sync delay 6, free buffers 26 (min 25), ts 142/141/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 30.26ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 3 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 39332
WiFi IP address 192.168.2.8
Signal strength -53dBm, channel 1, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
12/27/2024, 4:43:24 PM: : === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 13 of 40 (36 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124564 of which 12 recycled
Never used RAM 10824, free system stack 198 words
Tasks: NETWORK(2,nWait 7,11.9%,211) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,337) Move(4,nWait 6,0.0%,355) CanReceiv(6,nWait 1,0.1%,798) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,352) TMC(4,delaying,1.5%,101) MAIN(1,running,84.7%,665) IDLE(0,ready,1.1%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:00:28 ago, cause: software
Last software reset at 2024-12-27 16:42, reason: HardFault bfarValid precise, Expansion spinning, available RAM 9544, slot 0
Software reset code 0x4072 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b0f 0000000a 00000001 20033b0f 0009e8e9 000a1478 61010000 2002c438 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 a5a76ae7 00000000 00000113 2002c658 20031990 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 21388, completed 21387, timed out 0, errs 0
MCU temperature: min 37.2, current 37.4, max 38.6
Supply voltage: min 24.3, current 24.4, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 105, reads 2532, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 0, read errors 0, write errors 1, ifcnt 107, reads 2531, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 54, reads 2534, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 4, read errors 0, write errors 1, ifcnt 109, reads 2531, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 2, read errors 0, write errors 1, ifcnt 107, reads 2532, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 0, read errors 0, write errors 1, ifcnt 108, reads 2531, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 54, reads 2534, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-27 16:43:21
Cache data hit count 53217681
Slowest loop: 8.67ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 2.5ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 262, received 817, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6034, peak Tx sync delay 6, free buffers 26 (min 25), ts 142/141/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 30.26ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 3 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 39332
WiFi IP address 192.168.2.8
Signal strength -53dBm, channel 1, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0

12/27/2024, 7:24:14 PM: m122: === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 3 of 40 (36 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124564 of which 12 recycled
Never used RAM 10824, free system stack 188 words
Tasks: NETWORK(2,nWait 7,17.2%,227) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,331) Move(4,nWait 6,0.0%,341) CanReceiv(6,nWait 1,0.1%,773) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,348) TMC(4,nWait 6,1.5%,101) MAIN(1,running,80.4%,665) IDLE(0,ready,0.0%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 01:26:50 ago, cause: software
Last software reset at 2024-12-27 17:57, reason: HardFault bfarValid precise, Platform spinning, available RAM 9828, slot 2
Software reset code 0x4060 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b0f 0000000a 00000001 20033b0f 0009e8e9 000a1478 61010000 00000000 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 a5a76ae7 00000000 00000113 2002c658 200329c0 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 3907791, completed 3907789, timed out 0, errs 0
MCU temperature: min 34.6, current 35.0, max 38.4
Supply voltage: min 24.3, current 24.4, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 138, reads 14856, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 0, read errors 0, write errors 1, ifcnt 141, reads 14856, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 76, reads 14859, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 2, read errors 0, write errors 1, ifcnt 142, reads 14856, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 2, read errors 0, write errors 1, ifcnt 141, reads 14856, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 0, read errors 0, write errors 1, ifcnt 141, reads 14856, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 76, reads 14859, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-27 19:24:11
Cache data hit count 4294967295
Slowest loop: 9.07ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 5.2ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 46899, received 145915, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6031, peak Tx sync delay 279, free buffers 26 (min 25), ts 26051/26050/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 30.89ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 3 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 39164
WiFi IP address 192.168.2.8
Signal strength -52dBm, channel 1, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
12/27/2024, 7:24:15 PM: : === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 3 of 40 (36 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124564 of which 12 recycled
Never used RAM 10824, free system stack 188 words
Tasks: NETWORK(2,nWait 7,17.2%,227) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,331) Move(4,nWait 6,0.0%,341) CanReceiv(6,nWait 1,0.1%,773) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,348) TMC(4,nWait 6,1.5%,101) MAIN(1,running,80.4%,665) IDLE(0,ready,0.0%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 01:26:50 ago, cause: software
Last software reset at 2024-12-27 17:57, reason: HardFault bfarValid precise, Platform spinning, available RAM 9828, slot 2
Software reset code 0x4060 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b0f 0000000a 00000001 20033b0f 0009e8e9 000a1478 61010000 00000000 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 a5a76ae7 00000000 00000113 2002c658 200329c0 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 3907791, completed 3907789, timed out 0, errs 0
MCU temperature: min 34.6, current 35.0, max 38.4
Supply voltage: min 24.3, current 24.4, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 138, reads 14856, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 0, read errors 0, write errors 1, ifcnt 141, reads 14856, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 76, reads 14859, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 2, read errors 0, write errors 1, ifcnt 142, reads 14856, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 2, read errors 0, write errors 1, ifcnt 141, reads 14856, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 0, read errors 0, write errors 1, ifcnt 141, reads 14856, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 76, reads 14859, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-27 19:24:11
Cache data hit count 4294967295
Slowest loop: 9.07ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 5.2ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 46899, received 145915, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6031, peak Tx sync delay 279, free buffers 26 (min 25), ts 26051/26050/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 30.89ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 3 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 39164
WiFi IP address 192.168.2.8
Signal strength -52dBm, channel 1, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0

12/27/2024, 11:36:18 PM: m122: === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 18 of 40 (26 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124540 of which 12 recycled
Never used RAM 10848, free system stack 202 words
Tasks: NETWORK(2,nWait 7,8.6%,228) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,349) Move(4,nWait 6,0.0%,355) CanReceiv(6,nWait 1,0.1%,798) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,348) TMC(4,nWait 6,1.5%,101) MAIN(1,running,87.4%,665) IDLE(0,ready,1.6%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:00:18 ago, cause: software
Last software reset at 2024-12-27 23:35, reason: HardFault bfarValid precise, none spinning, available RAM 9828, slot 1
Software reset code 0x4073 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b0f 0000000a 00000001 20033b0f 0009e8e9 000a1478 61010000 2002c438 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 a5a76ae7 00000000 00000113 2002c658 200329c0 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 14104, completed 14103, timed out 0, errs 0
MCU temperature: min 37.2, current 37.2, max 38.6
Supply voltage: min 24.3, current 24.4, max 24.5, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 171, reads 1672, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 2, read errors 0, write errors 1, ifcnt 174, reads 1672, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 98, reads 1675, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 2, read errors 0, write errors 1, ifcnt 176, reads 1672, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 0, read errors 0, write errors 1, ifcnt 174, reads 1672, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 2, read errors 0, write errors 1, ifcnt 174, reads 1672, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 98, reads 1675, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-27 23:36:17
Cache data hit count 35559593
Slowest loop: 4.77ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 2.5ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 176, received 555, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6053, peak Tx sync delay 3, free buffers 26 (min 25), ts 94/93/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 11.41ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 4 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 35880
WiFi IP address 192.168.2.8
Signal strength -48dBm, channel 1, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
12/27/2024, 11:36:19 PM: : === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 18 of 40 (26 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124540 of which 12 recycled
Never used RAM 10848, free system stack 202 words
Tasks: NETWORK(2,nWait 7,8.6%,228) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,349) Move(4,nWait 6,0.0%,355) CanReceiv(6,nWait 1,0.1%,798) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,348) TMC(4,nWait 6,1.5%,101) MAIN(1,running,87.4%,665) IDLE(0,ready,1.6%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:00:18 ago, cause: software
Last software reset at 2024-12-27 23:35, reason: HardFault bfarValid precise, none spinning, available RAM 9828, slot 1
Software reset code 0x4073 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b0f 0000000a 00000001 20033b0f 0009e8e9 000a1478 61010000 2002c438 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 a5a76ae7 00000000 00000113 2002c658 200329c0 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 14104, completed 14103, timed out 0, errs 0
MCU temperature: min 37.2, current 37.2, max 38.6
Supply voltage: min 24.3, current 24.4, max 24.5, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 171, reads 1672, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 2, read errors 0, write errors 1, ifcnt 174, reads 1672, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 98, reads 1675, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 2, read errors 0, write errors 1, ifcnt 176, reads 1672, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 0, read errors 0, write errors 1, ifcnt 174, reads 1672, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 2, read errors 0, write errors 1, ifcnt 174, reads 1672, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 98, reads 1675, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-27 23:36:17
Cache data hit count 35559593
Slowest loop: 4.77ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 2.5ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 176, received 555, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6053, peak Tx sync delay 3, free buffers 26 (min 25), ts 94/93/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 11.41ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 4 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 35880
WiFi IP address 192.168.2.8
Signal strength -48dBm, channel 1, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0

12/28/2024, 6:52:18 PM: m122: === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 9 of 40 (34 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124564 of which 12 recycled
Never used RAM 10824, free system stack 194 words
Tasks: NETWORK(2,nWait 7,17.1%,233) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,323) Move(4,nWait 6,0.0%,355) CanReceiv(6,nWait 1,0.1%,798) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,348) TMC(4,delaying,1.5%,101) MAIN(1,running,80.5%,665) IDLE(0,ready,0.0%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:59:23 ago, cause: software
Last software reset at 2024-12-28 17:52, reason: HardFault bfarValid precise, FilamentSensors spinning, available RAM 9804, slot 0
Software reset code 0x406d HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b1f 0000000a 00000001 20033b1f 0009e8e9 000a1478 61010000 2002c438 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 a5a76aff 00000000 00000113 2002c658 200329d8 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 2673145, completed 2673144, timed out 0, errs 0
MCU temperature: min 34.4, current 34.6, max 38.2
Supply voltage: min 24.3, current 24.4, max 24.5, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 210, reads 61813, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 0, read errors 0, write errors 1, ifcnt 214, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 120, reads 61815, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 2, read errors 0, write errors 1, ifcnt 215, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 2, read errors 0, write errors 1, ifcnt 213, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 0, read errors 0, write errors 1, ifcnt 213, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 120, reads 61815, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-28 18:52:15
Cache data hit count 4294967295
Slowest loop: 8.98ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 6.1ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 32083, received 99820, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6060, peak Tx sync delay 270, free buffers 26 (min 25), ts 17820/17819/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 11.33ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 4 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 39172
WiFi IP address 192.168.2.8
Signal strength -49dBm, channel 1, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0

12/28/2024, 6:52:20 PM: : === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 9 of 40 (34 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124564 of which 12 recycled
Never used RAM 10824, free system stack 194 words
Tasks: NETWORK(2,nWait 7,17.1%,233) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,323) Move(4,nWait 6,0.0%,355) CanReceiv(6,nWait 1,0.1%,798) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,348) TMC(4,delaying,1.5%,101) MAIN(1,running,80.5%,665) IDLE(0,ready,0.0%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:59:23 ago, cause: software
Last software reset at 2024-12-28 17:52, reason: HardFault bfarValid precise, FilamentSensors spinning, available RAM 9804, slot 0
Software reset code 0x406d HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b1f 0000000a 00000001 20033b1f 0009e8e9 000a1478 61010000 2002c438 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 a5a76aff 00000000 00000113 2002c658 200329d8 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 2673145, completed 2673144, timed out 0, errs 0
MCU temperature: min 34.4, current 34.6, max 38.2
Supply voltage: min 24.3, current 24.4, max 24.5, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 210, reads 61813, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 0, read errors 0, write errors 1, ifcnt 214, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 120, reads 61815, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 2, read errors 0, write errors 1, ifcnt 215, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 2, read errors 0, write errors 1, ifcnt 213, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 0, read errors 0, write errors 1, ifcnt 213, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 120, reads 61815, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-28 18:52:15
Cache data hit count 4294967295
Slowest loop: 8.98ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 6.1ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 32083, received 99820, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6060, peak Tx sync delay 270, free buffers 26 (min 25), ts 17820/17819/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 11.33ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 4 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 39172
WiFi IP address 192.168.2.8
Signal strength -49dBm, channel 1, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
12/28/2024, 6:52:20 PM: : === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 9 of 40 (34 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124564 of which 12 recycled
Never used RAM 10824, free system stack 194 words
Tasks: NETWORK(2,nWait 7,17.1%,233) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,323) Move(4,nWait 6,0.0%,355) CanReceiv(6,nWait 1,0.1%,798) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,348) TMC(4,delaying,1.5%,101) MAIN(1,running,80.5%,665) IDLE(0,ready,0.0%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 00:59:23 ago, cause: software
Last software reset at 2024-12-28 17:52, reason: HardFault bfarValid precise, FilamentSensors spinning, available RAM 9804, slot 0
Software reset code 0x406d HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b1f 0000000a 00000001 20033b1f 0009e8e9 000a1478 61010000 2002c438 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 a5a76aff 00000000 00000113 2002c658 200329d8 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 2673145, completed 2673144, timed out 0, errs 0
MCU temperature: min 34.4, current 34.6, max 38.2
Supply voltage: min 24.3, current 24.4, max 24.5, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 210, reads 61813, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 0, read errors 0, write errors 1, ifcnt 214, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 120, reads 61815, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 2, read errors 0, write errors 1, ifcnt 215, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 2, read errors 0, write errors 1, ifcnt 213, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 0, read errors 0, write errors 1, ifcnt 213, reads 61812, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 120, reads 61815, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-28 18:52:15
Cache data hit count 4294967295
Slowest loop: 8.98ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 6.1ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 32083, received 99820, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6060, peak Tx sync delay 270, free buffers 26 (min 25), ts 17820/17819/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 11.33ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 4 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 39172
WiFi IP address 192.168.2.8
Signal strength -49dBm, channel 1, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0

12/28/2024, 7:06:01 PM: m122: === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 5 of 40 (36 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124552 of which 0 recycled
Never used RAM 10848, free system stack 198 words
Tasks: NETWORK(2,nWait 7,8.8%,215) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,343) Move(4,nWait 6,0.0%,355) CanReceiv(6,nWait 1,0.1%,798) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,353) TMC(4,nWait 6,1.5%,110) MAIN(1,running,87.2%,665) IDLE(0,ready,1.7%,29) AIN(4,delaying,0.8%,268), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 00:00:18 ago, cause: software
Last software reset at 2024-12-28 19:05, reason: HardFault bfarValid precise, none spinning, available RAM 9828, slot 2
Software reset code 0x4073 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b0f 0000000a 00000001 20033b0f 0009e8e9 000a1478 61010000 2002c438 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 a5a76ae7 00000000 00000113 2002c658 200329c0 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 13848, completed 13847, timed out 0, errs 0
MCU temperature: min 38.9, current 39.1, max 40.3
Supply voltage: min 24.3, current 24.4, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 247, reads 1634, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 2, read errors 0, write errors 1, ifcnt 251, reads 1633, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 142, reads 1636, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 2, read errors 0, write errors 1, ifcnt 252, reads 1633, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 0, read errors 0, write errors 1, ifcnt 250, reads 1634, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 2, read errors 0, write errors 1, ifcnt 250, reads 1633, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 142, reads 1636, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-28 19:06:00
Cache data hit count 34679509
Slowest loop: 4.76ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 2.5ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 173, received 539, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6031, peak Tx sync delay 3, free buffers 26 (min 25), ts 92/91/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 33.75ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 3 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 39332
WiFi IP address 192.168.2.8
Signal strength -47dBm, channel 1, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
12/29/2024, 12:39:22 AM: m122: === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 8 of 40 (33 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124564 of which 12 recycled
Never used RAM 10824, free system stack 186 words
Tasks: NETWORK(2,nWait 7,17.1%,228) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,323) Move(4,nWait 6,0.0%,341) CanReceiv(6,nWait 1,0.1%,773) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,348) TMC(4,nWait 6,1.5%,101) MAIN(1,running,80.5%,665) IDLE(0,ready,0.0%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes: WiFi(NETWORK)
=== Platform ===
Last reset 02:40:20 ago, cause: software
Last software reset at 2024-12-28 21:59, reason: HardFault bfarValid precise, none spinning, available RAM 10824, slot 2
Software reset code 0x4073 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033a5f 0000000a 00000001 20033a5f 0009e8e9 000a1478 61010000 2002c438 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 a5a76a07 00000000 00000113 2002c658 20032908 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 7215286, completed 7215286, timed out 0, errs 0
MCU temperature: min 34.6, current 34.6, max 36.0
Supply voltage: min 24.3, current 24.4, max 24.5, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 44, reads 22570, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 0, read errors 0, write errors 1, ifcnt 49, reads 22570, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 175, reads 22573, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 2, read errors 0, write errors 1, ifcnt 48, reads 22569, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 0, read errors 0, write errors 1, ifcnt 46, reads 22570, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 0, read errors 0, write errors 1, ifcnt 46, reads 22570, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 175, reads 22573, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-29 00:39:18
Cache data hit count 4294967295
Slowest loop: 8.97ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 4.9ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 86593, received 269406, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6034, peak Tx sync delay 285, free buffers 26 (min 25), ts 48102/48101/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 11.35ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 4 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 39168
WiFi IP address 192.168.2.8
Signal strength -57dBm, channel 1, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0

12/29/2024, 6:44:30 AM: m122: === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 3 of 40 (33 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124564 of which 12 recycled
Never used RAM 10824, free system stack 190 words
Tasks: NETWORK(2,nWait 7,17.1%,209) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,329) Move(4,nWait 6,0.0%,341) CanReceiv(6,nWait 1,0.1%,773) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,348) TMC(4,nWait 6,1.5%,101) MAIN(1,running,80.6%,665) IDLE(0,ready,0.0%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 02:13:40 ago, cause: software
Last software reset at 2024-12-29 04:30, reason: HardFault bfarValid precise, Platform spinning, available RAM 9828, slot 1
Software reset code 0x4060 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b0f 0000000a 00000001 20033b0f 0009e8e9 000a1478 61010000 2002c438 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 85a7424a 00000000 00000113 2002c658 200329c0 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 6016135, completed 6016133, timed out 0, errs 0
MCU temperature: min 34.2, current 35.0, max 38.2
Supply voltage: min 24.3, current 24.3, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 77, reads 8242, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 0, read errors 0, write errors 1, ifcnt 82, reads 8242, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 197, reads 8244, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 2, read errors 0, write errors 1, ifcnt 81, reads 8241, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 0, read errors 0, write errors 1, ifcnt 80, reads 8242, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 0, read errors 0, write errors 1, ifcnt 79, reads 8242, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 197, reads 8244, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-29 06:44:29
Cache data hit count 4294967295
Slowest loop: 9.02ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 6.1ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 72196, received 224618, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6031, peak Tx sync delay 280, free buffers 26 (min 25), ts 40105/40104/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 11.41ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 4 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 39156
WiFi IP address 192.168.2.8
Signal strength -59dBm, channel 11, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
12/29/2024, 6:44:30 AM: : === Diagnostics ===
RepRapFirmware for Duet 3 Mini 5+ version 3.5.4 (2024-11-24 10:44:24) running on Duet 3 Mini5plus WiFi (standalone mode)
Board ID: NTK2Z-J196U-D65J0-40KMN-1V03Z-ZJMGF
Used output buffers: 3 of 40 (33 max)
=== RTOS ===
Static ram: 103496
Dynamic ram: 124564 of which 12 recycled
Never used RAM 10824, free system stack 190 words
Tasks: NETWORK(2,nWait 7,17.1%,209) LASER(5,nWait 7,0.0%,269) HEAT(3,nWait 6,0.0%,329) Move(4,nWait 6,0.0%,341) CanReceiv(6,nWait 1,0.1%,773) CanSender(5,nWait 7,0.0%,336) CanClock(7,delaying,0.0%,348) TMC(4,nWait 6,1.5%,101) MAIN(1,running,80.6%,665) IDLE(0,ready,0.0%,29) AIN(4,delaying,0.8%,259), total 100.0%
Owned mutexes:
=== Platform ===
Last reset 02:13:40 ago, cause: software
Last software reset at 2024-12-29 04:30, reason: HardFault bfarValid precise, Platform spinning, available RAM 9828, slot 1
Software reset code 0x4060 HFSR 0x40000000 CFSR 0x00008200 ICSR 0x00000803 BFAR 0x0d392e38 SP 0x20011f80 Task NETW Freestk 448 ok
Stack: 0d392e30 20033b0f 0000000a 00000001 20033b0f 0009e8e9 000a1478 61010000 2002c438 00000001 20012000 00000113 0009e8e9 2002c438 0002e74f 0d392e30 2002c401 20012050 85a7424a 00000000 00000113 2002c658 200329c0 2002c670 2001eb00 a5a5a5a5 000305d9
Error status: 0x00
Aux0 errors 0,0,0
MCU revision 3, ADC conversions started 6016135, completed 6016133, timed out 0, errs 0
MCU temperature: min 34.2, current 35.0, max 38.2
Supply voltage: min 24.3, current 24.3, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
Heap OK, handles allocated/used 99/10, heap memory allocated/used/recyclable 2048/300/128, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: standstill, SG min 0, read errors 0, write errors 1, ifcnt 77, reads 8242, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 1: standstill, SG min 0, read errors 0, write errors 1, ifcnt 82, reads 8242, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 2: standstill, SG min 0, read errors 0, write errors 1, ifcnt 197, reads 8244, writes 10, timeouts 0, DMA errors 0, CC errors 0
Driver 3: standstill, SG min 2, read errors 0, write errors 1, ifcnt 81, reads 8241, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 4: standstill, SG min 0, read errors 0, write errors 1, ifcnt 80, reads 8242, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 5: standstill, SG min 0, read errors 0, write errors 1, ifcnt 79, reads 8242, writes 13, timeouts 0, DMA errors 0, CC errors 0
Driver 6: standstill, SG min 0, read errors 0, write errors 1, ifcnt 197, reads 8244, writes 10, timeouts 0, DMA errors 0, CC errors 0
Date/time: 2024-12-29 06:44:29
Cache data hit count 4294967295
Slowest loop: 9.02ms; fastest: 0.16ms
=== Storage ===
Free file entries: 20
SD card 0 detected, interface speed: 22.5MBytes/sec
SD card longest read time 6.1ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== DDARing 1 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters 0 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Movement locks held by null, null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
SBC is idle in state(s) 0
Daemon is idle in state(s) 0
Aux2 is idle in state(s) 0
Autopause is idle in state(s) 0
File2 is idle in state(s) 0
Queue2 is idle in state(s) 0
Q0 segments left 0, axes/extruders owned 0x0000803
Code queue 0 is empty
Q1 segments left 0, axes/extruders owned 0x0000000
Code queue 1 is empty
=== CAN ===
Messages queued 72196, received 224618, lost 0, errs 0, boc 0
Longest wait 2ms for reply type 6031, peak Tx sync delay 280, free buffers 26 (min 25), ts 40105/40104/0
Tx timeouts 0,0,0,0,0,0
=== Network ===
Slowest loop: 11.41ms; fastest: 0.00ms
Responder states: MQTT(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 4 of 8
=== WiFi ===
Interface state: active
Module is connected to access point 
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.2.0
MAC address d8:bf:c0:14:e5:fc
Module reset reason: Power up, Vcc 3.36, flash size 2097152, free heap 39156
WiFi IP address 192.168.2.8
Signal strength -59dBm, channel 11, mode 802.11n, reconnections 0
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0