M115
FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 3.5.3 ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2024-09-18 11:25:32
ok
M587
Error: M587: use M552 to abandon the current connection attempt before using this command
ok
M552
WiFi module is changing mode
ok
Error: WiFi module reported: Timed out
WiFi module is idle
M587
Error: M587: use M552 to abandon the current connection attempt before using this command
ok
M552 S0
ok
Error: WiFi module reported: Timed out
WiFi module is idle
M587
Remembered networks:
<ETX><ETB><STX> IP=0.23.2.0 GW=5.45.2.0 NM=0.23.2.0
Gregs WIFI IP=0.0.0.0 GW=0.0.0.0 NM=0.0.0.0
TNCAPF318D9 IP=192.168.1.14 GW=0.0.0.0 NM=0.0.0.0
ok
M552 S1
ok
M552 S0
ok
Error: WiFi module reported: Timed out
WiFi module is idle
M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.5.3 (2024-09-18 11:25:32) running on Duet WiFi 1.02 or later
Board ID: 0JD6M-99APT-NU4SN-6J9F4-3SN6M-14QKK
Used output buffers: 1 of 26 (10 max)
Error in macro line 1 while starting up: Bad command: 
=== RTOS ===
Static ram: 23376
Dynamic ram: 71596 of which 0 recycled
Never used RAM 15652, free system stack 180 words
Tasks: NETWORK(1,ready,6.9%,344) HEAT(3,nWait 5,0.0%,378) Move(4,nWait 5,0.0%,359) MAIN(1,running,92.7%,500) IDLE(0,ready,0.3%,29), total 100.0%
Owned mutexes: USB(MAIN)
=== Platform ===
Last reset 00:04:26 ago, cause: power up
Last software reset details not available
Error status: 0x00
Aux0 errors 0,0,0
MCU temperature: min 21.3, current 26.3, max 26.5
Supply voltage: min 0.3, current 1.6, max 1.7, under voltage events: 0, over voltage events: 0, power good: no
Heap OK, handles allocated/used 99/2, heap memory allocated/used/recyclable 2048/40/12, gc cycles 0
Events: 0 queued, 0 completed
Driver 0: ok, SG min n/a
Driver 1: ok, SG min n/a
Driver 2: ok, SG min n/a
Driver 3: ok, SG min n/a
Driver 4: ok, SG min n/a
Driver 5: 
Driver 6: 
Driver 7: 
Driver 8: 
Driver 9: 
Driver 10: 
Driver 11: 
Date/time: 1970-01-01 00:00:00
Cache data hit count 4294967295
Slowest loop: 80.54ms; fastest: 0.14ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 0.9ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, height map offset 0.000, max steps late 0, min interval 0, bad calcs 0, ebfmin 0.00, ebfmax 0.00
no step interrupt scheduled
Moves shaped first try 0, on retry 0, too short 0, wrong shape 0, maybepossible 0
=== DDARing 0 ===
Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters -1 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0
=== GCodes ===
Movement locks held by null
HTTP is idle in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is ready with "M122" in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Q0 segments left 0
Code queue 0 is empty
=== Network ===
Slowest loop: 0.66ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0)
HTTP sessions: 0 of 8
=== WiFi ===
Interface state: idle
Module is idle
Failed messages: pending 0, notrdy 0, noresp 0
Firmware version 2.1.0
MAC address 00:00:00:00:00:00
Module reset reason: Power up, Vcc 2.66, flash size 2097152, free heap 47772
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0
ok