@infiniteloop
Thanks for your help.
Removing the first T-1 P0; (line 5 below), did not solve the issue.
Removing the second T-1 P0; (line 13 below), did solve the issue (tried multiple times, seems to be reliably solved).
(Tried all 4 combinations of commenting out the lines).
Not sure why a T-1 P0; (Line 13) immediately followed by a T0 P6; (line 14) causes the T0 P6; to not complete.
Reminder: It runs through the macros, and even finishes executing tpost0.g, but never moves on to the next line.
Since it seems that the logic behind resurrection has been tweaked in 3.4, I'll wait for that release and see what happens.
Thanks!
resurrect.g that worked:
; File "0:/gcodes/HandleSet.gcode" resume print after print paused at 2022-01-31 21:07
G21
M140 P0 S110.0
G29 S1
T-1 P0
G92 X3.384 Y-123.624 Z0.300
G60 S1
G10 P0 S250 R170
T0 P0
M98 P"resurrect-prologue.g"
M116
M290 X0.000 Y0.000 Z0.000 R0
;T-1 P0
T0 P6
; Workplace coordinates
.... Following lines truncated...