@Phaedrux said in Noob building a HEVO in need of help.:
@Quattro said in Noob building a HEVO in need of help.:
3: I got some strange error in my macro files. It's not actually errors. The macro files were overwritten with these two lines.
Load and unload filament: Error: Bad command: {"main":{"language":"en":, "lastHostname":"192.168.1.38","darkTheme":false, "useBinaryPrefix":true
G29 macro ; Unload 20mm filament G1 E-20 F2000me":"192That would seem to indicate that you've got some junk data in the macros maybe?
I see that you're running firmware 3.0 but can't tell exactly which DWC version you're using. It may be time to update to 3.01-RC10 and DWC 2.1.5 that just came out. Much has been improved since the first 3.0 release.
I could not find anything fuzzy in the macro files. As I wrote in the last post, I have updated to the latest version now. The icons is fixed and i hope everything else is good aswell.
@zapta said in Noob building a HEVO in need of help.:
@Quattro, looking at the picture, your piezo seems to be attached below the extruder, not between the hotend and the mount as shown in this picture:
https://static.wixstatic.com/media/e08222_2a4a1876056c405e89d253a6baf28993~mv2.jpg
Are you sure it is supposed to work that way, just getting triggered by it's own mass?
The Piezo triggers when it senses a force, like a g-sensor. I could not adjust the sensetivity to where it did not trigger when moving the bed and when it triggers when the bed hits the nozzle. I've seen many different mounting solutions with this probe. I am not a expert, this is just my observations. As I wrote, I have switched to a IR-sensor and it is working fine.
To anyone wondering, this thread is a mix between a build thread and "I am a noob and need help" 😬