@jay_s_uk I have to say, my mind is kinda blown on what this can do. I suppose I'm off on this rabbit hole today.

@adhanabal This doesn't currently exist as a feature. It would need to be added.

@T3P3Tony thanks, I will give it a whirl and share something here.
@sebkritikel that is the plan, get "toolmode" from slicer or prompt for it in start.g using the new M291 method, and then swap things around.

@techworld it sounds like you have not uploaded a config for the machine as thats the default message box in config.g

Best to have a look at the documentation here:
https://docs.duet3d.com/User_manual/Overview/Getting_started_Duet_3_MB6XD#upload-machine-configuration

@Phaedrux Hello @Phaedrux

I will give the M500 a shot then resort to a complete rebuild of the image for the PI.

@gloomyandy that works, thank you

@chrishamm That fixed it. SD Card failed. Fortunately I was able to get all the critical stuff off of it.

That is a good reminder to back it up more often.

It's running 3.4.2 but I'll upgrade it shortly.

@rmilyard use putty/YAT and as a serial connection
https://docs.duet3d.com/en/User_manual/Troubleshooting/Terminal_Emulators

would be good to grab an output of M122 before your send the above commands (you can do that over serial too)

@jay_s_uk Screenshot 2023-02-20 154834.jpg Thank you very much. Been tryin to figure that out for a couple hours now.

@chrishamm Interesting repos. Will explore on the possibilities of these repos. However I think it still requires some learning on Vue . It would be interesting to develop and extend DWC plugins in framework agnostic way which might interests community to develop more plugins.

@webcur2010
You can use the object model to get information about any sensor

For example

echo sensors.analog[3].lastReading

375D5DF6-6D9A-4118-82E0-BDC27092532A.jpeg

F849DA15-2328-4871-ADDB-F3EF94C8FC8E.jpeg

@dc42 Solved by adding R2200 at last in that command!

@Phaedrux I successfully set up an access point and DWC appeared. I think I will write two macros to change between a connection to Wi-Fi from a router and to an access point. Thank you for your support.

@T3P3Tony, I must admit, I am not up-to-date on a lot of what you mentioned. First, I am seriously impressed that you can keep anything windowze related running for multiple days ... when I last used windowze, doing a reboot was standard operating procedure and was done on a fairly regular basis (this would be the windowze bashing portion of this post).
I was unaware of anything 'browser console' related (ignorance is bliss) but yes, there is such an animal in Firefox. Mind you, from a quick look, it might as well be some ancient papyrus based chicken scribbles for all the sense it makes to me. I will have a look-see next time I am seeing an issue, maybe something jumps out at me.
There seems to be a pile of developer stuff available for Firefox with the 'memory tool' probably being the most interesting of the bunch. Again though, this is several levels beyond my pay grade 😞
I am glad to hear that I am not just seeing things ....

@FreakOnLeash Probably best to start a new thread and share some more information about your setup.

@JDFesto I have not had the opportunity to play with the python library but instead of sending it as

json=open("sample.g").read()

have you tried

data=open("sample.g").read()

@chrishamm hi, colours in 3.4.5 perfect easy to read

@jay_s_uk cheers i am running beta3.5b1