@Wally said in random Duet3 + SBC questions...:
@Danal
Not being super python savvy, I think it would be very handy if you could provide the modified version of timelapse.py and a bit of instructions on how to setup for others with a Duet3 + SBC. I would be willing to help test/verify/report on my setup. If it helps, I already have MJPG-streamer and FFMPEG setup and running on my SBC (Pi 3).
I may have misread this when I replied back on the 18th.
DuetLapse can run on any Pi. Personally, I wouldn't run it on a Pi zero, but it will probably work (very slowly). The Pi on which DuetLapse runs only needs to be able to reach the printer that it is going to monitor or control via the network, and the camera it is told to use. If a command or library is missing, it will tell you how to get it.
To say this same thing phrased another way:
DuetLapse can be run on the Pi in a Duet 6HC + Pi configuration. With no modifications.
DuetLapse does not require running on a Duet 6HC + Pi. It runs on any Pi that has network connectivity to the printer.
Therefore, the instructions are:
Install per
https://github.com/DanalEstes/DuetLapse#installation
Perhaps take a look at ./DuetLapse.py -h.
Run.
Enjoy.