Question about M671 when used with auto bed leveling
-
Hi,
How accurate must the values in M671 be to get good results?
Thanks.
Frederick
-
A few mm error won't affect the results significantly. A larger error would mean that you need to repeat the levelling, but you may need to do that anyway.
-
@dc42 said in Question about M671 when used with auto bed leveling:
A few mm error won't affect the results significantly. A larger error would mean that you need to repeat the levelling, but you may need to do that anyway.
Thank you, that's is what I needed to know.
Perhaps that information should be included in the Duet guide to auto bed leveling.
Frederick