G30 / G28 Bad Command
-
there seems to be a problem with the deploy and retract script.
can you execute the command manually in the console and check for extra characters in the script.
-
Yes, all work fine. Pin Down, Pin Up, Selfe Test ON and OFF.
also the Z Probe value (1000) is displayed in the test
-
what is the size in bytes of the deploy and retract script
-
here the whole content of the files
Deploy:
; deployprobe.g ; called to deploy a physical Z probe ; ; generated by RepRapFirmware Configuration Tool v2.0.4 on Thu Sep 26 2019 16:26:18 GMT+0200 (Mitteleuropäische Sommerzeit) M280 P3 S10 I1
Retract:
; retractprobe.g ; called to retract a physical Z probe ; ; generated by RepRapFirmware Configuration Tool v2.0.4 on Thu Sep 26 2019 16:26:18 GMT+0200 (Mitteleuropäische Sommerzeit) M280 P3 S90 I1
-
@Veti said in G30 / G28 Bad Command:
what is the size in bytes of the deploy and retract script
200 Bytes Deploy
202 Bytes Retract -
can you issue the commands M401 and M402?
-
@Veti said in G30 / G28 Bad Command:
can you issue the commands M401 and M402?
Yes, Pin is moving out and in.
But:
16:49:18M402
Error: Bad command:
16:49:11M401
Error: Bad command: -
there is something wrong with your deploy and retract scripts.
delete everything and type the commands per hand
-
@Veti said in G30 / G28 Bad Command:
there is something wrong with your deploy and retract scripts.
delete everything and type the commands per handnow this happend.
if i type M280 P3 S10 I1 it works. But M401 not
-
this is my library
-
Delete the probe files and create new ones with just the M280 command,
Perhaps there is something in the existing file that is causing the problem.
Frederick
-
Same problem
M401
Error: Bad command: M280 P3 S10 I1Their is only the M280 command in the file.
-
Okay. now it works fine.
I deleted all again and created again. Thank you very much!!