E3D MS-TC and RRF3
-
Hi all,
First post here, long time reader.
I'm about to mount DUET2ETH on my E3D Motion System with tool changer and from what I read on the github they are mostly providing examples for RRF2.
Before I dig into this project during weekend maybe someone already have the config for RRF3 for E3D motion system and tool changer that can save me some time?
-
If you look in the Getting Started section of the E3D forum, both I and at least one other user posted some RRF3 config and homing files in threads there.
-
I have a working Jubilee, which very similar to the E3D toolchanger. It is running on a Duet3+Pi, and two expanders.
I will post my config (and other files) tonight.
-
Thanks, "RRF3-TC-sys-files-centre-zero.zip" might be exactly what I need to start!
-
If that's the file that I posted, there are errors in 2 of the files that I have corrected since I uploaded them.
-
@dc42 you posted 2 archives, this is the second one with origin in the center of the bed. I will start the assembly of the MS-TC so hopefully today I will test the configuration out.
-
-
I have just posted a corrected set of files in that same thread.