Duet 3 5V issue
-
@dc42 yes the jumper is in place and 24V PSU is supplying the board but the 5V led is off.
-
And the other LEDs (with Vin connected)?
-
@bearer
V_Fused and 12V Leds on
4 Leds on -
Its over to @dc42 at this time i think
-
-
-
Looking closer the part to the left of it isn't level, but are you sure about that being the 5V regulator? (Schematic says U5 and tiny 16 pin QFN chip)(Wrong board) -
@droftarts I don't know if this can clarify something https://www.dropbox.com/s/cxmiagz20t1ytjx/5V%20Regulator%20Duet%203.jpg?dl=0)
-
@OscarGM, thanks for your patience. I approve a warranty replacement for your Duet 3 main board,
-
@dc42 thank you.
Do I have to do something about the process? -
@OscarGM I think you've already emailed us, I'll sort it out.
Ian
-
@bearer said in Duet 3 5V issue:
Looking closer the part to the left of it isn't level, but are you sure about that being the 5V regulator? (Schematic says U5 and tiny 16 pin QFN chip)(Wrong board)I did that too! I looked at the 3HC schematic by mistake. It made me doubt @dc42 ... but only for a minute or two!
Ian