Thermistor issue
-
I was having issues with my beds thermistor so I swapped it with one from an old hot end. I changed the config as needed and read 2000c. I hooked it directly without an extension I was using and it reads fine. The wire gauge is similar. The extension came with it from the old hotend. Thoughts?
-
Bad crimp or broken wire in the extension.
-
true enough, been using the extension for another part but it was held in such a way that worked and I did not notice that it was not a good connection.
-
Open/broken normally reads -273.
2000 is more indicative of a short in that harness.