G30 S-1 not reporting an offest
-
Has anyone encountered a scenario where the G30 S-1 command does not return an offset? I am trying to setup a BLtouch on my printer and the command shows that it completed, but I don't see the response in the console window. Thoughts?
-
@datasmasher send M115 and post the response, so we know what firmware version and hardware you’re using.
Ian
-
No console response from M115, but here are the details from the Machine-specific tab:
Board: Duet WiFi 1.02 or later
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 2.05.1 (2020-02-09b1)
Duet WiFi Server Version: 1.22 -
I get toast notifications saying the commands ran ok, but that is all.
-
I cleared my browser's cache and that seems to have fixed it.
-
@datasmasher said in G30 S-1 not reporting an offest:
Duet WiFi Server Version: 1.22
Your wifi server version is out of date.
Also, what version of DWC are you using?
-
@datasmasher said in G30 S-1 not reporting an offest:
I cleared my browser's cache and that seems to have fixed it.
And you get a response from G30 S-1 now, too?
Ian