Workflow: Tuning and tweaking
-
Hey guys,
so just for curiosity when you get yourself a new printer (bought or self built) what is your workflow for:
a: dialing in the settings for your printer
b: dialing in the settings for each new materialI will add "my" workflow soon
Maybe this topic will help "noobies" to turn the correct screws when new to the whole 3D printing thing
-
This is the official commissioning guide
-
There's also the commissioning and calibration sections of this guide: https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+3:+Commissioning/39?lang=en
And here for more indepth: https://forum.duet3d.com/topic/14250/tuning-jerk-accel-speed-settings/2?_=1585767493956