Panel due doesn't write to console during macros
-
I have noticed that while running a macro (from the PanelDue) that performs multiple G30 S-1 commands, that only the last value is written to the console.
while iterations <= 9 G1 Z6 G30 S-1
When I run the same macro from the DWC, all the values are written to the console.
If I addM117 {move.axes[2].machinePosition}
after each G30 S-1 then the value is displayed.
If I add
echo {move.axes[2].machinePosition}
then the echo is not written to the console of the PanelDue
Board: Duet 2 WiFi (2WiFi)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.01-RC9 (2020-04-21b1)
Duet WiFi Server Version: 1.23
Duet Web Control 2.1.3
PanelDue 7i - Firmware version 1.2.3