Powering Pi+Duet3 6hc ?
-
hey,
I´m a bit confused about powering the Pi. I´m about to power the Pi from the Duet, but I´ve read I need something like a bypass on the Duet.
Is this right?
I really won´t damage the board.
thnaks -
@barbarossa-cologne said in Powering Pi+Duet3 6hc ?:
I´m about to power the Pi from the Duet,
thats the default setup, only need to connect the ribbon cable.
(ref https://duet3d.dozuki.com/Wiki/Duet_3_Mainboard_6HC_Wiring_Diagram#Section_Important_notes if you want to change this later)
((ooh, they've updated the link T3P3Tony posted below, much clearer now, stick to that one))
-
@barbarossa-cologne If your Pi(including any peripherals like a screen and camera take <3A then you can power it from the Duet.
See here:
https://duet3d.dozuki.com/Wiki/Duet_3_Mainboard_6HC_Hardware_Overview#Section_Power_distribution
In this case you will have the Int 5V En jumper and the 5V -> SBC jumper fitted.