How to Move Individual Stepper Motor
-
I have my Voron core xy steppers mapped like this: M584 X0 Y1 Z2:4:10:11 E3 using an external breakout board.
I'm trying to correspond each Z drive with the M671 command for my G30 command to work properly. So I'm trying to determine the Z stepper by moving each one individually. That way I can know if my M671 correlates to my M584.
Duet wifi with firmware 2.05.
-
Use M584 from the console to change the assignment temporarily to use just one Z driver.
-
@dc42 said in How to Move Individual Stepper Motor:
M584
Thanks for the reply. That worked. Also, my G30 command is working correctly now! I got that solution from your answer here.
Thanks again!