Duet 2 Z Axis Stepper Beeping
-
I am trying to set up a printer using a Duet 2 Wifi and am having trouble with the Z axis stepper. Any time I send a movement command to the stepper it seems to try to move and makes a beeping sound. All of the other stepper drivers are working.
If I move the Z stepper to a different driver the stepper works and if I move another stepper to the Z driver it still makes the beeping sound so it seems to be something with the board.
If anyone could give any insight as to why the Z axis might not be working or any troubleshooting steps I could take it would be much appreciated!
-
Can you Post your congig.g?
-
See attached. Thank You!
config.g -
Can you also post the results of M122 and M98 P"Config.g"?
What kind of beeping sound are we talking? Can you record it with your phone?
This is a hang printer?
-
@Phaedrux We have figured it out. the steps per mm were not defined for the Z axis but were for the other two axes