M25 Pause print. Where does it save the coordinates?
-
I'm wondering if there is a file that is created when the pause button is pressed. I have been having a series of extruder jams and I have been manually going through the slicer and Gcode to create new files to resume printing from where last printed. But I was thinking there must be a file were the firmware is storing the resume location, and that I could just edit that. I do believe I read that somewhere in the documentation but I cannot seem to find the file anywhere.
Thanks for your help.
-
@baird1fa,
I believe the resume location is stored on the SD card file, 'sys/resurrect.g' -
The same steps use for power loss recovery should help you in these cases as well.
https://duet3d.dozuki.com/Wiki/Setting_up_to_resume_a_print_after_a_power_failure