Duet2 Wifi randomly(?) reboots
-
Hello,
Since a few days I start to notice my printer suddenly reboots randomly.
Today it happend during a 6h print. I haven't had any issues the last year with the current version and hardware I'm using.M122 code results below. What does the reason for the software reset mean?
Also, is there a way to continue the print when this happens? A bit annoying to restart a 6h print..Software info:
Firmware Name: RepRapFirmware for Duet 2 WiFi/Ethernet
Firmware Electronics: Duet WiFi 1.02 or later
Firmware Version: 2.02RC5(RTOS) (2018-11-28b1)
WiFi Server Version: 1.21
Web Interface Version: 1.22.5Kind regards,
JaspercM122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.02RC5(RTOS) running on Duet WiFi 1.02 or later
Board ID: 08DGM-917NK-F23T0-6JTD8-3SJ6S-TZ8NH
Used output buffers: 1 of 20 (8 max)
=== RTOS ===
Static ram: 27284
Dynamic ram: 98524 of which 0 recycled
Exception stack ram used: 280
Never used ram: 4984
Tasks: NETWORK(ready,328) HEAT(blocked,1232) MAIN(running,3548) IDLE(ready,200)
Owned mutexes:
=== Platform ===
Last reset 00:02:58 ago, cause: power up
Last software reset at 2020-12-22 17:42, reason: User, spinning module GCodes, available RAM 4716 bytes (slot 2)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 33.3, current 33.4, max 34.6
Supply voltage: min 11.1, current 12.1, max 12.3, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: standstill, SG min/max not available
Driver 1: standstill, SG min/max not available
Driver 2: standstill, SG min/max not available
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Date/time: 2021-01-16 17:28:38
Cache data hit count 664734732
Slowest loop: 2.10ms; fastest: 0.07ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 240, MinFreeDm: 240, MaxWait: 0ms, Underruns: 0, 0
Scheduled moves: 0, completed moves: 0
Bed compensation in use: none
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 0 is on, I-accum = 0.0
Heater 1 is on, I-accum = 0.5
=== GCodes ===
Segments left: 0
Stack records: 1 allocated, 0 in use
Movement lock held by null
http is ready with "M122 " in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 14.10ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8- WiFi -
Network state is running
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.21
WiFi MAC address 84:f3:eb:83:38:2c
WiFi Vcc 3.34, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 16192
WiFi IP address 192.168.178.53
WiFi signal strength -67dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0
- WiFi -
-
@Jasper said in Duet2 Wifi randomly(?) reboots:
Firmware Version: 2.02RC5(RTOS) (2018-11-28b1)
update to at least 2.05.1
-
Your firmware version is 2 years old. Many bugs have been fixed since.
If you still have access to DWC. Upload these 3 zip files, one at a time. Don't extract them. Reboot after each.
https://github.com/Duet3D/RepRapFirmware/releases/download/2.05.1/Duet2Firmware-2.05.1.zip
https://github.com/Duet3D/RepRapFirmware/releases/download/3.0/Duet2and3Firmware-3.0.zip
https://github.com/Duet3D/RepRapFirmware/releases/download/3.2/Duet2and3Firmware-3.2.zip
That will get your firmware and DWC up to date.
https://configtool.reprapfirmware.org/Start
For your config, might be a good idea to run through the configurator tool and generate a fresh set for RRF3 as many things have changed in the configuration. -
Thanks both, I will update the firmware and see if it is due to a bug that is being triggered after 2 years. I haven't updated earlier, because "if it ain't broke, don't fix it".
-
@Jasper said in Duet2 Wifi randomly(?) reboots:
if it is due to a bug that is being triggered after 2 years.
@Jasper said in Duet2 Wifi randomly(?) reboots:
Last software reset at 2020-12-22 17:42, reason: User, spinning module GCodes
Yes I think updating will help.
