Webcontrol G29 Manual Mesh
-
When I use G29 to do Manual Mesh probing and the popup appears.
it always starts at with Z at 5.7mm and on my iphone then has three buttons up and three down+25mm
+5mm
+0.05mm-0.05mm
-5mm
-25mmIs it possible to adjust which buttons are shown.. I don't need 25mm +/- but a 1mm button would come in handy.
Also how can I change the default 5.7mm raise? so its 0.5mm instead
also can we add some spacing between buttons,
with my fat fingers and iPhone screen, its so easy to hit the wrong one -
the buttons on the web ui can normally be adjusted by a right click.
never done manual mesh bed levelling thougha suggestion for you
https://de.aliexpress.com/item/32838312776.htmlcheap and work well as an alternative to manual mesh probing.
-
I had no idea you could right click and change them
thanks for the tip!