Error: Attempting to extrude with no tool selected.
-
Sounds like you don't have a tool selected at the start of a print.
Usually you'd add a T0 to the end of config.g and/or to the slicer start gcode.
-
Can you post an example gcode file?
Also the results of M122 and M98 P"config.g" please.
-
It's done with all the gcode files and all the slices
-
M122
=== Diagnostics === RepRapFirmware pour Duet 2 WiFi / Ethernet version 3.2 fonctionnant sur Duet WiFi 1.02 ou version ultérieure ID de carte: 08DGM-9T6BU-FG3S8-6JKDJ-3SN6S-1SLHH Tampons de sortie utilisés: 3 sur 24 (9 max) = == RTOS === RAM statique: 23460 RAM dynamique: 73620 dont 40 recyclées Jamais utilisé RAM 14960, pile système libre 191 mots Tâches: NETWORK (ready, 241) HEAT (bloqué, 307) MAIN (running, 448) IDLE ( prêt, 19) Mutex possédés: WiFi (NETWORK) === Plate-forme === Dernière réinitialisation il y a 00:00:28, cause: mise sous tension Heure de réinitialisation du logiciel inconnue, raison: Utilisateur, GCodes tournant, RAM disponible 14900, emplacement 1 Code de réinitialisation du logiciel 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Tâche MAIN Freestk 0 n / a État d' erreur: 0x00 Erreurs Aux0 0,0,0 Température MCU: min 17,1, courant 19,7, max 20,2 Tension d'alimentation: min 23,8, courant 24,0, max 24,2, événements de sous-tension: 0, événements de surtension: 0, puissance bonne: oui Driver 0: position 0, arrêt, SG min / max non disponible Driver 1: position 0, arrêt, SG min / max non disponible Driver 2: position 0, arrêt, SG min / max non disponible Pilote 3: position 0, arrêt, SG min / max non disponible Pilote 4: position 0, arrêt, SG min / max non disponible Pilote 5: position 0 Pilote 6: position 0 Pilote 7: position 0 Pilote 8: position 0 Pilote 9: position 0 Pilote 10: position 0 Pilote 11: position 0 Date / heure: 2021-02-10 22:54:56 Nombre de succès des données du cache 34262637 Boucle la plus lente: 4,72 ms; plus rapide: 0.20 ms erreurs I2C nak 0, délais d'envoi 0, délais de réception 0, finishTimeouts 0, réinitialisation 0 === Stockage === Entrées de fichiers gratuites: 10 carte SD 0 détectée, vitesse d'interface: 20,0 Mo / s Lecture la plus longue de la carte SD temps 2,6 ms, temps d'écriture 0,0 ms, nombre maximum de tentatives 0 === Move === DM créés 83, maxWait 0ms, compensation de lit en cours d'utilisation: aucune, compensation de compensation 0,000 === MainDDARing === Mouvements programmés 0, mouvements terminés 0 , hoquet 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === AuxDDARing === Mouvements programmés 0, coups terminés 0, hoquet 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === Heat === Chauffe-lits = 0 -1 -1 -1, ChamberHeaters = -1 -1 -1 -1 Le chauffage 1 est allumé , I-accum = 0.0 === GCodes === Segments à gauche: 0 Verrou de mouvement maintenu par null HTTP est inactif dans l'état (s) 0 Telnet est inactif dans l'état (s) 0 Le fichier est inactif dans l'état (s) 0 L' USB est inactif dans l'état (s) 0 Aux est inactif dans l'état (s) 0 Le déclencheur est inactif dans l'état (s) 0 La file d'attente est inactive dans l'état (s) 0 L' écran LCD est inactif dans l'état (s) 0 Le démon est inactif dans l'état (s) 0 L' autopause est inactif dans l'état (s) 0 La file d'attente de codes est vide. === Réseau === Boucle la plus lente: 15,72 ms; le plus rapide: 0,00 ms États du répondeur: HTTP (0) HTTP (0) HTTP (0) HTTP (0) FTP (0) Telnet (0), 0 session Sessions HTTP: 1 sur 8 - WiFi - L'état du réseau est actif Le module WiFi est connecté au point d'accès Messages d'échec: en attente 0, pas prêt 0, noresp 0 version du micrologiciel WiFi 1.25 WiFi adresse MAC 84: f3: eb: e3: f6: ac WiFi Vcc 3.42, raison de réinitialisation Mettre sous tension la taille du flash WiFi 4194304, tas gratuit 27248 WiFi Adresse IP 192.168.1.24 Puissance du signal WiFi -51dBm, mode 802.11n, reconnexions 0, modem en mode veille Registre d'horloge 00002002 États des prises : 4 0 0 0 0 0 0 0
edit
-
M98 P "config.g"
Warning: Macro file "config.g" not found -
@sgk said in Error: Attempting to extrude with no tool selected.:
M98 P "config.g"
No space between the P and "
-
M98 P"config.g"
HTTP is enabled on port 80
FTP is disabled
TELNET is disabled
Error: in file macro line 30 column 13: M591: string expected
Error: Invalid extruder number '1'
Warning: Macro file config-override.g not found -
@sgk said in Error: Attempting to extrude with no tool selected.:
; Filament sensor M591 D0 P1 C3 S1 ; Set Filament sensor Simple type (High) for extruder drive 0, connected to endstop input 3 (E0
For the first error with the sensor, you need to provide the actual pin name instead of C3
https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M591_RepRapFirmware_Num_3
How do you have it connected? It should be C"e0stop" if you were using the e0 endstop pin for example.
@sgk said in Error: Attempting to extrude with no tool selected.:
M572 D1 S0.275 ; Set bowden extruder elasticity compensation for E1
For the second error, you have two extruders configured for pressure advance, but you only have a single extruder defined. So remove that entry entirely.
It would still be useful to see an example gcode file so we can see what is happening at the start of a print. If the file is too large to share, you can copy and paste the first 50 lines or so, or host it on dropbox or something.
-
I have only one extruder
-
@sgk said in Error: Attempting to extrude with no tool selected.:
I have only one extruder
So then remove
M572 D1 S0.275 ; Set bowden extruder elasticity compensation for E1
-
that I delete
M572 D0 S0.05
-
and this
M591 E1 P1 C3 S1
-
@sgk said in Error: Attempting to extrude with no tool selected.:
M591 E1 P1 C3 S1
You need to change C3 to be C"PINNAME" where the pin name is whatever pin you are connecting your sensor to. E0stop for example.
-
I'm sorry
I'm a beginner
the sensor of what -
M591 D0 P1 C"E0" S1
-
like that
connecting the extruder to the duet card -
i have 2x this
M591 D0 P1 C"e0stop" S1 ; Set Filament sensor Simple type (High) for extruder drive 0, connected to endstop input 3 (E0M575 P1 S1 B57600 ; Set things up for the PanelDue
; Filament sensor
M591 D0 P1 C"E0stop" S1 ; Set Filament sensor Simple type (High) for extruder drive 0, connected to endstop input 3 (E0 -
maybe i had a mistake
-
Phaedrux
thank you very much for your help
i will try now
thanks again -
@sgk said in Error: Attempting to extrude with no tool selected.:
Error: Attempting to extrude with no tool selected.
Are you still getting this error?