Error: Attempting to extrude with no tool selected.
-
@sgk said in Error: Attempting to extrude with no tool selected.:
M98 P "config.g"
No space between the P and "
-
M98 P"config.g"
HTTP is enabled on port 80
FTP is disabled
TELNET is disabled
Error: in file macro line 30 column 13: M591: string expected
Error: Invalid extruder number '1'
Warning: Macro file config-override.g not found -
@sgk said in Error: Attempting to extrude with no tool selected.:
; Filament sensor M591 D0 P1 C3 S1 ; Set Filament sensor Simple type (High) for extruder drive 0, connected to endstop input 3 (E0
For the first error with the sensor, you need to provide the actual pin name instead of C3
https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M591_RepRapFirmware_Num_3
How do you have it connected? It should be C"e0stop" if you were using the e0 endstop pin for example.
@sgk said in Error: Attempting to extrude with no tool selected.:
M572 D1 S0.275 ; Set bowden extruder elasticity compensation for E1
For the second error, you have two extruders configured for pressure advance, but you only have a single extruder defined. So remove that entry entirely.
It would still be useful to see an example gcode file so we can see what is happening at the start of a print. If the file is too large to share, you can copy and paste the first 50 lines or so, or host it on dropbox or something.
-
I have only one extruder
-
@sgk said in Error: Attempting to extrude with no tool selected.:
I have only one extruder
So then remove
M572 D1 S0.275 ; Set bowden extruder elasticity compensation for E1
-
that I delete
M572 D0 S0.05
-
and this
M591 E1 P1 C3 S1
-
@sgk said in Error: Attempting to extrude with no tool selected.:
M591 E1 P1 C3 S1
You need to change C3 to be C"PINNAME" where the pin name is whatever pin you are connecting your sensor to. E0stop for example.
-
I'm sorry
I'm a beginner
the sensor of what -
M591 D0 P1 C"E0" S1
-
like that
connecting the extruder to the duet card -
i have 2x this
M591 D0 P1 C"e0stop" S1 ; Set Filament sensor Simple type (High) for extruder drive 0, connected to endstop input 3 (E0M575 P1 S1 B57600 ; Set things up for the PanelDue
; Filament sensor
M591 D0 P1 C"E0stop" S1 ; Set Filament sensor Simple type (High) for extruder drive 0, connected to endstop input 3 (E0 -
maybe i had a mistake
-
Phaedrux
thank you very much for your help
i will try now
thanks again -
@sgk said in Error: Attempting to extrude with no tool selected.:
Error: Attempting to extrude with no tool selected.
Are you still getting this error?
-
great it works thank you
infinitely for your help
now more than knowing how to get good quality, I have been looking for 1 year for how to get good quality.