Error: Attempting to extrude with no tool selected.
-
that I delete
M572 D0 S0.05
-
and this
M591 E1 P1 C3 S1
-
@sgk said in Error: Attempting to extrude with no tool selected.:
M591 E1 P1 C3 S1
You need to change C3 to be C"PINNAME" where the pin name is whatever pin you are connecting your sensor to. E0stop for example.
-
I'm sorry
I'm a beginner
the sensor of what -
M591 D0 P1 C"E0" S1
-
like that
connecting the extruder to the duet card -
i have 2x this
M591 D0 P1 C"e0stop" S1 ; Set Filament sensor Simple type (High) for extruder drive 0, connected to endstop input 3 (E0M575 P1 S1 B57600 ; Set things up for the PanelDue
; Filament sensor
M591 D0 P1 C"E0stop" S1 ; Set Filament sensor Simple type (High) for extruder drive 0, connected to endstop input 3 (E0 -
maybe i had a mistake
-
Phaedrux
thank you very much for your help
i will try now
thanks again -
@sgk said in Error: Attempting to extrude with no tool selected.:
Error: Attempting to extrude with no tool selected.
Are you still getting this error?
-
great it works thank you
infinitely for your help
now more than knowing how to get good quality, I have been looking for 1 year for how to get good quality.