please a little help dc42 I still have the same error
-
This post is deleted! -
@sgk Have you selected a tool, like T0 in config? It's best to put at the end and also in your slicer's start code.
-
yes of course
-
This post is deleted! -
@sgk, please post the GCode file you are trying to print. If uploading the file to the forum fails and you are using Chrome browser, try FireFox.
-
@sgk There's no need to double-post...
I suggest you leave this thread and continue you original one (https://forum.duet3d.com/topic/21572/error-attempting-to-extrude-with-no-tool-selected/5) and respond to the questions asked so we can help you