Instant speed & Extruder G1 Moves
-
The following assumes a G1 move is only being limited by the speed of the extruder.
If the required speed change between two G1 moves is less than the instant speed change is the speed change instant, or does that only apply if the current and target extruder drive speed are below the instant speed setting?
-
@DocTrucker said in Instant speed & Extruder G1 Moves:
The following assumes a G1 move is only being limited by the speed of the extruder.
If the required speed change between two G1 moves is less than the instant speed change is the speed change instant, or does that only apply if the current and target extruder drive speed are below the instant speed setting?
If the speed change for all axes and extruders is below the corresponding M566 jerk limit, and either both moves include both XY movement and extrusion, or the jerk policy is set to 1, then the speed change will be instant.