How to add multiple Z stepper drivers in RRF config tool
-
I am trying to add multiple steppers for my printer in the RRF config tool. In the configuration you select a driver for each axis of the printer. I have the duet mainboard 6HC and 4 z steppers so how can I select drivers 1-4 for the z axis?
-
The config tool does not currently support setting that up. It must be done manually by changing the M584 driver axis binding in config.g afterwards. Work is planned to improve the config tool to be able to handle more complex configurations.
Once you're in the web interface you can edit config.g directly to add your additional Z drivers to the Z axis in M584.
https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M584_Set_drive_mapping