Solved DWC report different firmware version than apt package manager
-
Hi, I currently have a Duet 3 mini 5+ alongside a Raspberry Pi 3b + and for some time now I have been receiving the following message when turning on my printer: "Warning: Incompatible firmware, please upgrade as soon as possible". Of course I tried to update the firmware using the package manager on the Raspberry, but it tells me that I have installed the latest firmware (3.3.0) being that DWC reports that I am using version 3.2.2.
This is what I get when running an M112:
M122 === Diagnostics === RepRapFirmware for Duet 3 Mini 5+ version 3.2.2 running on Duet 3 Mini5plus Ethernet (SBC mode) Board ID: LUR9T-W096U-D65J0-40KMS-1803Z-7MXNN Used output buffers: 1 of 40 (11 max) === RTOS === Static ram: 98732 Dynamic ram: 94468 of which 44 recycled Never used RAM 51972, free system stack 200 words Tasks: Linux(blocked,105) HEAT(blocked,315) CanReceiv(blocked,947) CanSender(blocked,372) CanClock(blocked,363) TMC(blocked,106) MAIN(running,519) IDLE(ready,20) AIN(blocked,269) Owned mutexes: HTTP(MAIN) === Platform === Last reset 00:16:07 ago, cause: power up Last software reset at 2021-08-01 22:22, reason: User, GCodes spinning, available RAM 51972, slot 0 Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00430000 BFAR 0xe000ed38 SP 0x00000000 Task Linu Freestk 0 n/a Error status: 0x00 Aux0 errors 0,0,0 Aux1 errors 0,0,0 Supply voltage: min 0.0, current 23.2, max 23.3, under voltage events: 0, over voltage events: 0, power good: yes Driver 0: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 11, reads 62381, writes 11, timeouts 0, DMA errors 0 Driver 1: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 13, reads 62379, writes 13, timeouts 0, DMA errors 0 Driver 2: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 13, reads 62378, writes 13, timeouts 0, DMA errors 0 Driver 3: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 13, reads 62378, writes 13, timeouts 0, DMA errors 0 Driver 4: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 13, reads 62379, writes 13, timeouts 0, DMA errors 0 Driver 5: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 13, reads 62379, writes 13, timeouts 0, DMA errors 0 Driver 6: position 0, standstill, SG min/max 0/0, read errors 0, write errors 0, ifcnt 13, reads 62378, writes 13, timeouts 0, DMA errors 0 Date/time: 2021-08-02 19:23:11 Cache data hit count 2299187756 Slowest loop: 1.23ms; fastest: 0.08ms === Storage === Free file entries: 10 SD card 0 not detected, interface speed: 0.0MBytes/sec SD card longest read time 0.0ms, write time 0.0ms, max retries 0 === Move === DMs created 83, maxWait 0ms, bed compensation in use: mesh, comp offset 0.000 === MainDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === AuxDDARing === Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === Heat === Bed heaters = 0 -1, chamberHeaters = -1 -1 Heater 1 is on, I-accum = 0.0 === GCodes === Segments left: 0 Movement lock held by null HTTP* is doing "M122" in state(s) 0 Telnet is idle in state(s) 0 File is idle in state(s) 0 USB is idle in state(s) 0 Aux is idle in state(s) 0 Trigger* is idle in state(s) 0 Queue is idle in state(s) 0 LCD is idle in state(s) 0 SBC is idle in state(s) 0 Daemon is idle in state(s) 0 Aux2 is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty. === CAN === Messages queued 8696, send timeouts 8694, received 0, lost 0, longest wait 0ms for reply type 0, free buffers 16 === SBC interface === State: 4, failed transfers: 1 Last transfer: 4ms ago RX/TX seq numbers: 33930/33930 SPI underruns 0, overruns 0 Number of disconnects: 0, IAP RAM available 0x113e0 Buffer RX/TX: 0/0-0 === Duet Control Server === Duet Control Server v3.3.0 Code buffer space: 4096 Configured SPI speed: 8000000Hz Full transfers per second: 35.11, max wait times: 14.8ms/0.0ms Codes per second: 0.07 Maximum length of RX/TX data transfers: 3424/984
And this is what I get when trying to update via apt:
sudo apt-get upgrade duetsoftwareframework Reading package lists... Done Building dependency tree Reading state information... Done duetsoftwareframework is already the newest version (3.3.0). Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
It is nothing that prevents me from printing, in fact I have been with this problem for about a month, but I would like to solve it ... I hope you can help me
-
Try using this method to get the firmware back in sync
https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Duet_3_Mini_5_WiFi_Ethernet
-
Thank you very much, that fixed my problem.
Thanks again