Problem config bed temp
-
@aribag_33 yea, upgrade to 3.3.0 and tune again.
upload this zip to the systems tab and let the magic happen https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/Duet2and3Firmware-3.3.zip -
@jay_s_uk
When I enter M115 I got a version 3.1.1 but when I check the version of the firmware I configured on reprapfirmware config tool it is the 3.3.0 -
@aribag_33 you're definitely running 3.1.1 as the config tool won't know what you're running.
As I say, upgrade using the file above -
@jay_s_uk
How can I upload "Duet2_SDiap32_WiFiEth.bin" ? -
@aribag_33 have you not tried just uploading the complete zip file to the system tab?
you can upload them individually if you wish to the system tab -
@jay_s_uk
I have done nothing yet . I just don't know how to upload this file on the board. My board is duet 3D 2 wifi -
-
@jay_s_uk
When I try to upload the all zip file I got this after cliking yes
M997 S0:1
Error: M997: in application programming binary " Duet2 combined IAP.bin" not found -
@aribag_33 upload this first. also to the system tab https://github.com/Duet3D/RepRapFirmware/releases/download/3.1.1/Duet2CombinedIAP.bin
-
@jay_s_uk
Ok I have been able to upload the firmware. I turned on the bed heat and it works !!Thank you again for your time and kindness.